 |
|
Packaging & Sealing Machine
We are engaged in manufacturing and supplying a wide range of industrial packaging machines as per defined industry standards. Our range of machines include form fill machine, form fill seal machine, F.F.S four side sealing machine (liquid & paste), F.F.S with auger filler machine, F.F.S center sealing machine, F.F.S center seal pneumatic machine, candy pillow pack, horizontal flow wrapper machine, automatic mechanical intermittent vertical form fill & seal machine and collar type machine. Following are some of the salient features of our machines: - Less power consumption
- High packaging speed
- Good accuracy
- Easy to install and operate
- Safe to use
- Fully mechanical
- Low maintenance cost
|
|
|
|
|
|
F.F.S Four Side Sealing Machine (Liquid & Paste) |
|
|
|
|
|
 |
|
 |
 | |
 |
 | We are providing qualitative F.F.S four side sealing machine (liquid & paste) to our clients. These are appreciated for their energy efficiency and good speed. Our four side sealing machines are used for packing juice, shampoo, wine and lubrication oil. These machines are demanded in industries including cosmetics and beverages. Following are the specifications of our machines: | Type of Seal | Three Side / Four Side | | Packing Material | Shampoo, Lubrication Oil, Wine, | | Syrup, Juice & other Free Flow Liquid | | Weight of Material | 6ml up to 35 ml (as per req.) | | Filling System | Volumetric Piston Filling | | Filling Accuracy | ±1% | | Size of Bag | W 50 mm to 140 mm | | L 50 mm to 130 mm | | Speed / Capacity | Motor 1/2 HP | | 220v, 50 / 60 Hz Single Phase | | Heater 300x2=600w | | Main Load 3.6 Kw | | Film / Roll Material | Laminated Film Roll Supported Film | | eg. Aluminium Foil Pe, PP | | Film / Roll Size | OD to 250 max. | | ID of Roll Pipe 75 mm | | Machine Dimension | H-1785 mm | | W-550 mm | | L-750 mm | | Approx. wt. 380 kgs. | | Wooden Case Dimension | H 1560 mm | | W-910 mm | | L-1000 mm | | Gross Weight Approx. 480 Kgs. |
|  |
|
|
|
 |
|
 |
|
|
|
F.F.S With Auger Filler Machine |
|
|
|
|
|
|
|
|
|
|
|
With the help of our modern manufacturing facility, we make F.F.S. with auger filler machine. Our machines have the filling capacity of 40 to 70 bags per minute with a filling range of 5 gram 50 gm. These are used for packaging granules and sticky powder. The specifications of our F.F.S. with auger filler machine are as follows: | Filling System | Adjustable Augar Filling | | Filling Accuracy | + 1 to 1.5% | | Depend Upon Nature of Product | | Type of Seal | Three Side / Four Side | | Center or Back Seal | | Filling Range | 5 gm up to 50 gm. (as per req.) | | Packing Material | Sticky Powder & Granules | | Size of Bag / Pouch | W-100to 160 mm | | L-80to 130 mm | | Speed Capacity | 40 to 70 Bag / min | | Machine Dimension | H 2150 mm | | W- 680 mm | | L 900 mm | | Wooden Case Dimension | H 1700 mm | | W 1000 mm | | L 1100 mm | | Film Roll Dimension | OD 250 to 300 mm max | | ID 75 mm min | | Power Consumption | Motor 1/2 HP Single Phase 2 Nos | | 1 HP. Three Phase 1 Nos | | 220 v AC Single Phase | | Filling Mechanism | Clutch & Break. Gear Box | | Clutch & Break Controller | | Heater | 150 x 2 + 300 x2 |
|  | |
|
|
 |
|
|
|
|
|
|
|
|
F.F.S Centre Sealing Machine |
|
|
|
|
|
|
|
|
| |
|
 | By making use of quality raw material, we manufacture F.F.S centre sealing machines and form fill centre seal machines. These form fill machine and form fill seal machine have a filling range of 5 gram to 50 gram depend upon the nature of the product. Our machines are used in packaging granules and sticky powders with a speed capacity of 40 to 70 bags per minute. Specifications of our machines are mentioned below: | Filling System | Adjustable Telescopic Disc | | Volumetric Cup Filler t | | Filling Accuracy | ± 1 to 1.5% | | Depend Upon Nature of Product | | Type Of Seal | Three Side / Four Side | | Center or Back Seal | | Filling Range | 5 gm to 50 gm | | Packing Material | Sticky Powder & Granuals | | Size of Bag / Pouch | W-100 mm to 160 mm | | L-80 mm to 130 mm | | Speed Capacity | 40 to 70 Bag / min | | Machine Dimension | H-2150 mm | | W - 680 mm | | L - 900 mm | | Wooden Case Dimension | H 1700 mm | | W 1000 mm | | L 1100 mm | | Film Roll Size | OD 250 to 300 mm max | | 1 .D Film Reel Pipe | | 75 mm min | | Power Consumption | Motor 1/2 HP | | 220 v AC Single Phase | | Heater | 150x2 + 300x2 |
| |
|
|
|
|
|
|
|
|
|
F.F.S Centre Seal Pneumatic Machine |
|
|
|
|
|
|
|
|
|
|
|
We are engaged in offering highly efficient form fill machine, form fill seal machine, F.F.S. center seal pneumatic machine to our customers. These form fill machine and form fill seal machine are used for making center seal pouch and the packing material is heat sealable laminated films. Our form fill machines have the production rate of 30 shots per minute, which varies according to the nature of product and filling. Following are the specifications of our F.F.S centre seal pneumatic machine: | Packing Material | Heat Sealable Laminated Films | | Roll Width | Min. 120mm, Max. 425 mm | | Pouch Type | Center Seal Pouch | | Pouch Dimension | Width =50-200 mm | | Height = 65 -300 mm | | Electrical Supply | 230 V/A.C/ Single Phase / 50 Hz | | Power Consumption | 3Kw | | Compressed Air Required | 6 CFM @ 6 Bar | | Production Rate | 30 Shots Per Minute | | (Varies as per the Nature of Product & Filling Range) | | Weight | Approx. Weight 550 Kgs. | | Machine Dimension | H 2150 mm W - 680 L 900 mm |
|  | |
|
|
|
|
|
|
|
|
|
|
|
Vertical Form Fill & Seal Machine |
|
|
|
|
|
|
|
|
| |
|
 | With the help of our advanced production facility, we make automatic mechanical intermittent vertical form fill & seal machine. These are used for packing granules and powder and can pack 25 to 50 pouches per minutes. Our machines are available in a sealing type of center sealing. The specifications are given below: | Product Application | Powder, Granules | | Sealing Type | Center Sealing | | Roll Width | Width : 20mm 300mm | | Feeding System | Auger filler/Volumetric Cup Filler | | Machine Motor | 1/2 Hp, Single Phase, 50 Hz | | Electrical Supply | 220 V, AC, Single Phase 50Hz. | | Packing Film | Any Heat Sealable Laminated Roll | | Machine Control/Through | PLC (Programmable Logic Control) | | Photocell Registration System | Yes. | | Contact part | Stainless Steel | | Heater Load | 150Wx2 Nos. : 300Wx2Nos. | | Packing Film Pulling | Through electromagnetic clutch and Brake | | Temperature Controller | PID Based | | Machine Speed | 25 50 Pouches per Min. | | (Depends upon Quantity and Product) | | Power Consumption | 2Kw approx. | | Machine Motion | Intermittent | | Machine Weight | 300 kg. Approx. |
| |
|
|
|
|
|
|
|
|
|
Candy Pillow Pack Machine |
|
|
|
|
|
|
|
|
|
|
|
We provide candy pillow packing machines, which are known for their easy operation and noiseless performance. These are used for packing candy and toffees and can package 300 to 400 candies per minute. Our machines have a weight of 700 kilograms. We can provide our machines in various parameters such as packing speed and size as per the client’s specific demands. Specifications of the machines are as follows: | Production Out Put | 300 to 400 Candies Per Minute | | (Optional Size Available) | | Motor: 1 HP DC with DC Drive | | Power Required | Voltage: 220 Volts | | Phase: Single Phase | | Load : L 2.5 Kw | | Packing Materials | AH Types of Lamination | | Machine Dimensions | I- 1800 mm, W -1000 mm, | | | H -1360 mm | | Weight | Approx. 700 Kgs. |
|  | |
|
|
|
|
|
|
|
|
|
|
|
Horizontal Flow Wrapper Machine |
|
|
|
|
|
|
|
|
| |
|
 | Assisted by our skilled team of personnel, we make horizontal flow wrapper machine for various industrial purposes. These are available in a feeding style of both automatic and manual with the center seal packing style. Our machines are used for packing syringes, glucose bottles, auto parts, biscuits, scrub pads, cakes and tooth brushes. Following are the specifications of our wrapper machines: | Feeding Style | Automatic / Manual | | Packing Style | Center Seal | | Packing Size | Length : 70 mm to 300 mm | | Width : 30 mm to 180 mm | | Height: 3mm to 100 mm | | Packing Material | All Types of Lamination | | Production Output | Approx. 40 to 120 Pouches @ Mns. (Depend upon the Packing size) | | Power Required | Motor: 1.5 H.P. DC With DC Drive | | Voltage: 220 Volts | | Phase: Single Phase | | Load: 3 Kw | | Machine Dimension | Approx. 1080 x 1700 x 1800 mm | | Weight | Approx. 700 Kgs. |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
We are involved in manufacturing collar type machines to our customers. Our machines are center seal pouch type and packaging material used is heat sealable laminated machines. These have the production output of 30 shots per minute with a power consumption of 3Kw. The specifications of our collar type machines are as follows: | Packing Material | Heat Sealable Laminated Films | | Roll Width | Max - 425mm, Min. 120 mm | | Pouch Type | Center Seal Pouch | | Pouch Dimension | Width = 50 -200 mm | | Height = 65 300 mm | | Electrical Supply | 230 V / A.C / Single Phase / 50 Hz | | Power Consumption | 3Kw | | Compressed Air Required | 6 CFM @ 6 Bar | | 30 Shots @ Minute | | Production Rate | (Varies as per the Nature of Product & Filling Range ) | | Weight | Approx. 750 Kgs | | Machine Dimension | L 1050mm, W 990 mm, H 1360 mm |
|  | |
|
|
|
|
|
|
|
|
|
