Supa Sales & Services Private Limited

This is
a unique 3 in 1 Totally Automatic Integrated Oil Seed Processing
Machine. This machine combines normal traditional 3 stage operations
in Oil Extraction System into a single processing unit. This
Integrated Oil Seed Processing Machine does following 3 Operation in
single process totally automatically:-

1. 
   Oil
   Seed Heating with the help Electrical Heating System.
   
   


2. 
   Immediately
   Squeezing the heated seeds to extract oil with highest yield %
   continuously and
   
   


3. 
   Vacuum
   Filtering the extracted raw oil and collecting clean filtering
   edible quality oil in the twin SS Tanks which can be pumped into the
   overhead tank for packing.
   
   

In
contrast to the old traditional system which generally needs
following equipment:-

1. 
   Water
   Heater (Boiler)
   
   


2. 
   Feed
   Water Pump
   
   


3. 
   Steam
   Kettle
   
   


4. 
   Oil
   Expeller
   
   


5. 
   Filter
   Press and
   
   


6. 
   Pump
   for feeding fitter press.
   
   

The
Integrated Oil Seed Processing Machine is a single machine
incorporating:

1. 
   Continuous
   Electric Heating Zone which provides uniformly Controlled
   Temperature.
   
   


2. 
   Oil
   Press or Expeller attached to the Heating Zone and
   
   


3. 
   Oil
   collection Tanks bellow the expeller attached to the Vacuum Pump.
   
   

The Oil
Seeds are fed in the hopper at the top and filtered oil is collected
in the Tanks at the Bottom.

The
operation of this machine are totally trouble free, clean, neat and
non-messy. The Repair & Maintenance is also very simple.

There
are several models available ranging from capacity to process approx
1 Ton of Oil Seeds / day to 6 Tons of Oil Seeds / day. A brief
Technical Details are as under :

Seed input / 24hrs. approx	Power Required KW approx	Space Require L x W x H mm approx	Machine Wt. Kg approx
1.0 Ton	12.30	1218x1160x1882	650
1.3 Ton	06.05	1500x1100x1620	500
3.0 Ton	08.30	1400x1280x1700	780
3.5 Ton	11.25	1718x1450x1910	950
4.5 Ton	14.75	1818x1450x1910	990
6.5 Ton	16.10	2120x1350x1890	1080

In Modern technology & competitive world we depend on better quality of Air. The performance of our Air Compressor is better than others as it depends on the unique design of cooling system of our Air Compressors. Our compressors  have following special features which make them most efficient and economical:

• Extra and Deep Fins on Cylinder & Head


• Inter-stage intercooler Copper Radiator between Cylinders.


• Aluminium Intercooler Fintube with bigger Dia


• Fan on Flywheel with clear cross ventilation


• Runs at Lower RPM than other popular makes

Lower the RPM means better performance of machine & lower the wear & tear of rings, finger valves, lower the temperature, etc. Lower the temperature, lesser the carbon & moisture generation. Minimum service & breakdown.

Oil is the life of compressor so it is required to replace minimum after every 500 working hours. Our air compressor requires only 1 to 2 ltrs of oil as compared to other compressors which requires 5 ltrs.

In
addition to supplying the standard dairy projects we have developed
an innovative concept of installing a complete dairy project inside a
standard export container which does not need to construct any
building for the project. The container itself acts as the housing of
the project. Just by providing the power and drinking water
connection at appropriate place the project can be commissioned
immediately without delay. The most viable production capacity for
this concept is 1000 to 1500 Ltrs. of milk per hour. The project can
be supplied either for fresh milk or powdered milk.

Tube Ice Plant : We are the suppliers of Tube Ice Plants for various industries including hospitality, RMC, Seafood Processing, Chicken Processing, Chemical and Dye Manufacturing, etc. The benefits of Tube Ice over Block, Cube and Flake Ice are as under:
 
Capacity Range : 5 TON To 80 TON
 
• HIGHEST ELECTRICITY EFFICIENCY-
• LOWEST OPERATING COST
• LOWEST SPACE to PRODUCTION RATIO
• MINIMAL MAINTENANCE
• FLEXIBLE BATCH CYCLE
• LOWEST OVERALL INVESTMENT
• QUALITY ICE 
• UNIFORM MELTAGE
• LABOUR COST SAVINGS
 
Benefits of Tube ice as compared to Flake Ice:
 
Tube Ice :
• Direct refrigeration through heat transfer tubes resulting in less energy consumption.
• No moving parts in Icemaker and only one cutter assembly provided for ice sizing.
• Has in-built chilling system and does not require any external chilling plant further reducing electricity
  consumption.
• Tube ice conveyed through inexpensive screw conveyer or gravity.
• Uniform Tube ice of 1”dia henceforth reducing meltage & zero lump formation.

Flake Ice :
• Continuous operation of flakers motor across the freezing plate, resulting in high electricity consumption.
• Wear & Tear of moving parts resulting in high maintenance & reduced efficiency.
• Requires additional chilling plant (greater electricity consumption) to reduce inlet water temperature for rated
  capacity.
• Flake ice requires pneumatic conveyers, which is power intensive and expensive.
• The flakes lump together, forming into a snowball, which in turn prevents uniform cooling.

We also provide you with the technical detail sheets for the various models.

We supply wide range of PET Stretch Blow Moulding Machines like: Single Station Two Cavity Semi Automatic Machines from 100ml to 2000ml capacity as well as Fully Automatic continuous production Multi Blow Machines.

 We are offering all kinds of Packaging Machines for weighing or volumetric measuring or counting and filling as well as sealing of -

• Liquids like water, Milk, oils, jellies, honey, creams, lotions, etc


• Rotary Type Bottle Filling & Capping Plant.


• Powder like talcum, spices, flours, pharmaceutical powders, detergents, etc.


• Granules like fertilizers, pesticides, germicides, seeds, etc.


• Cereals like rice, wheat, maize, beans, cashews, almonds, etc.


• Engineering Products like Auto Spares, Bearings, Nuts & Bolts, Seals, Files, Handles, Tools, Springs, Steel Balls & so on.

These items can be packed in various types of plastic films suitable for the individual products. We are also offering Horizontal Flow Wrap machines for packing of individual articles like soaps, detergents, cakes, bearings, electrical switches & sockets, tattoos, milk bars, files, handles and so on.

Liquid Section: Cylindrical tanks, industrial stirrer, homogenizer, emulsifier, horizontal sparkler type filter press, bottle washing machine, volumetric liquid filling machine, p.p./ropp/vial/saline bottle sealing machines, bottle capping machine.

Powder Section: Multi –Mill, portable mechanical sifter, powder and mass mixer, drum mixer, stainless steel coating pan, polishing pan, table disintegration test machine, tablet friability test machine, tablet hardness tester (monsanto), tablet counter (shovel type)

Capsule Section: multi- mill, portable mechanical sifter, double cone blender, drum mixer, octagonal cone blender, capsule filling machine.

Injectable Section: plate and frame (vertical) filter press, membrane filter holder, pressure vessels, filling vessels

We offer machine for Economic Pulverizing of Plastic granules to high quality free-flowing powders. 30-60 mesh sieves pulverizer.

a) Consistent powder quality
b) High output rates.
c) Favourable output-power ratio.
d) Micro-fine powder.
e) Easy to operate & maintain and
f) Single person operation.

Pulverizer Plant Models as under : PDM 400M / PDM 600M / PDM 800M.

Low-pressure foaming machines are built to ensure very high performance standards. The simple and compact open frame construction enables easy installation and maintenance. User friendly management of the system. Allows easy setting of the production parameters excellent performance records and lowest operating cost justify your choice. We offer low investment machine for wide low-pressure foaming for wide range of industrial applications. Machines are built to ensure very high performance standards. The simple and compact open frame construction enables easy installation and maintenance.
 
Polyurethane foaming machines for integral skin, bus and chair seats, shoe soles transfer pumps, rotational molded products, panels, hollow structures and so on.

Products Exporting: Polyurethane Foaming Machines, Drums Transfer Pumps, Low Pressure Foaming Equipments, Polyurethane Processing Machines, Shoe Sole Machines etc.
Foaming Machine Models available:
a) D-SERIES
    i)   D-5, ii) D-10, iii) D-15, iv)  D-30(B) &  v) D – 60
 
b) F-SERIES :
     i) F-20, ii) F-30, iii) F-50,  & iv)  F-100

Rotational molding technology is rapidly expanding. The Rotational Molding Technology is also expanding the capabilities of polymer product manufacturers by enabling them to create light-weight, seamless, stress-free parts of virtually any size in the most complex shapes. Rotationally molded products are now produced with a wide range of materials, performance characteristics, colors, surface textures and finishes. It also permits the production of the products which demand customized designs to meet precise market requirements more economically than by conventional injection or blow molding methods.

Rotational molding is a three-stage, pressure less, plastic molding process. During the first stage of heating the charged mold slowly rotates in two planes (bi-axial rotation). Heat transfer causes the plastic charge inside the mold to melt and get uniformly coated on the interior of the mold. During the second stage, the mold with coating of molten plastic charged almost solidified moves to the cooling station. The mold is cooled by air and water spray while it is still rotating in its arm. In the final load/unload stage, the mold is opened by opening all the nut bolts or de-clamping all the clamps. The mold is opened and the part is removed from the mold. A new charge of material is loaded into the mold. The mold is closed with the help of nuts and bolts or clamps and is kept ready for the next cycle. While the first arm is going through second stage the second arm is under going first stage and the third arm going through third stage, and so on.  Thus, the process becomes a continuous process.
 
 
 
 
 
 
 
 
 
 
 

Semi automatic weigh filler is vertical filling machine for filling tea, sugar, pulses, grains, wafers, namkeen, dry fruits like products in desired packing materials like pouches, jar or bottles manually. Machine is fitted with suitable kg capacity of hopper for product. All the product contact parts are in SS-304. All Mild Steel parts of machine are powder coated. This is a PLC based Single Head Linear Electronic Weight Filler. This filler weighs the filling material in individual pan mounted on the load cell to get maximum output & accuracy. The load cell output is processed directly by the PLC & its modules. The vibrators & pan opening is controlled by PLC itself. Two separate vibrator controllers are provided to adjust the feed rate of the vibrator feeders. As soon as the set weight is achieved the vibrators are switched off & the ready pay is discharged into the pouch / jar / bottle as required. Sealing of pouch and capping of Jar and Bottle are done manually separately.

We offer various types of welding machines, manufactured as per international standards with latest technology controller. We specialize in-

• Butt Welding Machines: Micro Butt Welders, Wire Butt Welders, Heavy Duty Upset Butt Welders & Band-Saw Blade Welders etc.


• Spot Welding Machines: High precision Table Mounted, Portable Hand Operated, Portable pneumatically pirated, Pneumatically Operated Press type Projection Spot Welding Machine.


• Seam Welding Machine
  Arc Welding Transformers: Mini ARC Welder, Air cooled Welder and Oil Cooled Welder.


• MIG / MAG /CO2 Welding Plant
  D.C. Rectifier Welding Machine: We also modify machines for specialized requirements to completely satisfy the customer requirements backed by high quality controls and excellent support service.

1.      Castings in ferrous - including static, centrifugal, and investment type in stainless and alloy steels - rough or fully machined of any size.

2.      Castings in non-ferrous materials such as brass, aluminum, and bronzes. Static, centrifugal, and investment type. Rough machined or fully machined.

3.      Forgings – rough machined or fully machined in Stainless steel, carbon steel, brass, aluminum and copper etc.

4.      Cylinder valves and regulators for LPG, Oxygen, Acetylene, Argon, Nitrogen, Chlorine, etc. gas cylinders. These are BIS certified from ISO 9001 companies.

5.      Precision machined components in carbon steel, stainless steel, brass, aluminum, and parts for gear boxes, etc.

6.      Special purpose or tailor made equipment and machines to improve the efficiency in any manufacturing unit, e.g. material handling equipment, manipulators, special-purpose fixtures, etc.

7.      Fabricated equipment in Stainless Steel 304 or 316 for food, pharmaceutical, dairy, veg oil, and other industries. These can be done under inspection of various agencies such as Lloyds, BVQI, ABS, SGS, TUV, etc. The vessels will conform to relevant ASME standards.

Diesel engines, gen-sets and spares for different ratings