We offer a superior range of PVC Conduit Pipes to clients, which have got excellent features that makes them superior from other pipes offered in market. Some of the features of the range offered include :

• Excellent di electric strength with no breakdown even at 5000V
• High insulation resistance
• No deformation or bending
• High resistance to oil
• No cracking
• Excellent rigidity
• Sizes available: 20, 25, 32, 40, 50 mm

We offer to clients a full range of low voltage Aerial Bunched Cables, which are a better alternative to bare overhead wires in distribution network. The cores of our wires are insulated that makes them intrinsically safe and reliable. The inductance in these cables is much less then wire system, because of the proximity of the phase conductors, making the voltage drop lower per unit of length.

Construction

XPLE insulated power conductors of Aluminum are laid together around a high tensile stranded and galvanized steel insulated messenger wire to form the aerial bunched cables. The aluminum conductor used confirms to IS: 8130 standards, whereas the high tensile galvanized steel is as per IS: 398 standards.

Application Areas

The wires can be used as

• Replacement of bare lines in rural areas
• Replacement of bare lines where reliability is of prime importance
• Replacement of bare lines where high degree stability of supply voltage is important
• In hilly terrains where cost of erection of overhead lines or underground cables become higher
• As reinforcement of existing system without increasing voltage
• For temporary supply

The XPLE Cables manufactured by us are widely used by the clients due to their excellent electric, thermal, mechanical and chemical properties. These cables have evolved as the alternative for conventional cables using PVC as insulating material. These cables are manufactured confirming to IS: 7098 standards or the specifications laid by the client. Some of the advantages of these cables include:

• It is possible to use one lower size of cable as compared to PVC for high current ratings
• XPLE can withstand short circuit temperature up to 250°V whereas PVC cables can withstand up to 160°C
• No elevation limit
• These cables can retain their flexibility down up to 40°C
• These cables do not melt like polyethylene therefore, its combustion do not cause a damage
• Jointing and terminations are very easy
• Enhanced life due to less di-electric losses

The AAC / AAC Conductors we offer to clients are made as per IS : 398 standards. These conductors provide superior performance results due to their advanced manufacturing. The range of conductors we offer to clients have got various specifications which are as follows:

We manufacture the most superior range of ACSR Conductors for clients as per ISS standards. These conductors result in providing superior and safer services to the users. We make use of high grade steel and aluminum in making these conductors. Some of the features of the products are as follows:

The PVC Casings and Capings we offer to clients confirm the laid IS: 14927 (2) 2001 standards. These products do not have burrs on both surfaces and can withstood against evenly distributed load. Have got excellent rigidity and resistance to flame propagation. The casing and caping are available in size of 20 x 12, 25 x 16, 30 x 15 and 38 x 19 mm.

Applications

• Open wiring in industrial/ residential and commercial buildings
• Street light and traffic light signals
• Wiring on buses, railway coaches, ships, aircrafts etc
• Can be used in ceiling suspended ducting, telecom and terminal wiring as well as in false ceilings and sleevings.
• Can be used for bare conductors

Salient Features:

• Economical as compared to steel conduits and casing
• Highly insulated non conductor prevents short circuit hazards
• Corrosion free nature
• Wide color range available
• Uniformity of wall thickness
• Maximum internal wiring space
• Odorless and impurity less
• Available in double locking system
• Able to retard the spread of fire and many more

The Unplasticised PVC Pipes or UPVC rigid piper we offer to clients are made as per IS: 4985:2000 specifications and are available in all dimensions in millimeters. Some of the salient features of our product range include:

• High co-efficient of flow
• Resistance to corrosion, acids and alkalies
• No formation of scaling or any incrustation
• Long lasting life
• Good impact strength and many more

We offer the most advance cable trunking and ducting systems to clients, where we provide them with the most superior and reliable products. The systems are made as per IS: 14927 (P2) standards. These are also offered as per the customers' requirements & specifications.

We offer to clients the widest range of Wires and Cables, which are manufactured by using superior quality of aluminum and copper as conductors. These cables are made as per ISO standards and are approved by PWD, BHEL, PVVNL and many more reputed organizations. Manufactured to deliver superior results for a longer time, our range of wires and cables are tested at various stages to ensure their flawless functioning in future.