The refrigeration machinery made by us are cost effective and designed with precision. Our refrigeration machinery can easily provide the most desired cooling even at room temperature.

• Atmospheric Ammonia Condensers, Evaporative Condensers, Shell & Tube, Horizontal & Vertical Condensers.
• "Amoking" make Freon Compressors & Spare parts for Ice Cream Plants/ Chillers.
• Ammonia Receivers, Oil Separators, Accumulators and Intercoolers.
• Spiral Fin Tube available in Aluminium, Steel & Stainless Steel. Fin is maximum 25 mm high and can be suitable for pipe or tube up to 50 mm diameter. These are most efficient for Cooling Coils, Bunker Coils, and Evaporative Condensers. Spiral finish Tubes can be supplied as per customer's specifications and requirements also.
• Flake Ice Machines and Ice Cube Machines.
• Bunker Coils for Cold Storages of 1-1/4" C class bare pipe or 3/4" C class finned pipe (spiral fins / straight fins) of aluminium.
• Ammonia diffusers suitable for Meat Storage, Vegetable Storage, Holding Coolers, Freezing Units, Dairy Product Coolers or any Dry Coil Air Cooling application.
• Ammonia Charging Line, Gauge Glasses and Reflex Glass Liquid Level Gauge.
• Ice Bank Coils, Trunk Coils, IBT Tank, Ice Freezing Tank, Mixing and Dip Tank.
• Pre-Fabricated Cold rooms made of pre-fabricated PUF/ EPS panels with insulation at the center and pre-painted GI/SS sheet on both the sides. Any size of Cold Rooms can be made as per customer's requirements.
• Electrical Panel for Refrigeration Plants (Angle Iron/ Cubical Type).
• Rotary Air Blowers of various sizes & potato dryers.
• Axial Flow Fans with Fixed and Adjustable Blades of aluminium/ stainless steel.
• Electronic Liquid Level Regulators, Float Valves & Solenoid Valves.
• Centrifugal Air Blower Rotor (Blower Impeller) MS / GI and their housing.
• Accessories like 'U' Bends, Long & Short Bends, Sockets, 'T' and 'L' joints, Nipples, Thermometers, Ammonia Pressure Gauges, Pressure Pipe/ Gauge Board Pipe.

Colt-Series Compressors are most suitable for industrial refrigeration and low temperature applications such as Cold Storage, Ice plants, Fisheries plants, Ice cream plants, Dairy plants, Chemical plants, Pharmaceutical plants & Air Conditioning plants. Our range of open type compressors are available in single as well as in double stage versions with use on Ammonia (NH3), R-12 and R-22 Refrigerant etc. They are well-designed and robust machines capable of running continuously, for prolonged period with minimum attention. These compressors, by virtue of their high speed and multiplicity of cylinder exceptionally compact and economical of space. They are also designed to accommodate varying refrigeration demands with maximum economy in power and are well suited to automatic installations. The compressors are available in two different series:

• Single Stage Compresors:Colt-1, Colt-2, Colt-3, Colt-4, Colt-6, Colt-9, Colt-12.
• Double Stage Compressors: Colt-21, Colt-31, Colt-42, Colt-51, Colt-63, Colt-72, Colt-84, Colt-93, Colt-102.

Cast Steel Weld-In-Line Refrigeration Valves are available in sizes from 1/2" to 12". They are well-designed for some specific purpose in refrigeration as well as other industries suitable for gases and liquids. They are made of steel & are directly welded with the pipeline eliminating flanged system. Therefore, they are lighter in weight & provides simplified & low cost installations. Large ports & fluid passages allow full capacity with minimum pressure drop. Stainless steel seats are provided in the valves, which prevents rusting. Cast Steel Valves are also available in screwed type in sizes 1/4" to 6". Any special size can be provided as per your requirement.

We manufacture Butterfly Valves that are widely used as throttling valves to control the flow of gas or liquid. By turning the valve's pivot axis at right angles to the direction of flow in the pipe, they can control the flow through a circular disc or vane. They are available in several body styles and seal types. The valves are provided with integrally moulded elastomer body liner for perfect seating and complete isolation of body material from fluid media. No gaskets are required as the body liner effects a perfect seal between the valve body and the mating pipe flanges. Salient Features:

• Replaceable liners.
• Internal one piece stem/ disc square drive.
• Face to face EN 558/ BS5155/ ISO5752/ API609.
• Powder coated for excellent corrosion.
• Long neck body (for proper insulation etc.)

Industrial Valves PN16:

• Wafer Type: DN 32-600
• Ends: Pn 6/ 10/ 16/ ANSI 150/ BS 10 - Tabled and EIS 6392 TABLE 10 to 20/ IS 6418 Table 6 to 9.
• Pressure Rating: 16 bar
• Actuation: hand operated/ gear unit/ electric/ pneumatic
• Materials of Construction:

- Body: Grey cast irob (epoxy powder coated) - Seat: Nitrile/ EPDM/ VITON/ SILICONE/ HYPALON - Disc: Stainless steel epoxy powder coating/ aluminium coating

Designed to meet customer's expectations, we are one of the leading names to offer ammonia valves. Our range of globe valves/ angle valves are available in flanged and screwed types and in sizes from, 1/4" to 12". Globe Valves permit the flow in the same direction whereas Angle Valve changes the flow of direction from horizontal to vertical and vice versa. The use of elbows & bends is thus eliminated. Through our unique design, appropriate material selection and innovative production techniques, we deign safety valves that are available in screwed type and in sizes from 1/2" & 3/4". Made of high grade material and built with great precision, these valves are normally set at 250 pounds per square inch pressure. Enhancing the safety of various processes, our safety relief valves avoid a lot of industrial accidents. Used where higher pressure and capacity is needed, they have high capacity level and pressure relief. The other types of ammonia valves available are:

• Check Valves
• Stainer Valves
• Needle Valves
• Tee valves
• Gauge Valves
• Float valves
• Safety valves
• Cast Steel weld In Line Valves
• In Line Check Valves
• Reflex Glass Liquid Level Gauge
• Flow Indicators

We offer ball valves as per clients' specifications and requirements. These ball valves allow the user to temporarily stop the water flow through the pressure hose and change quickly between spray gun and other attachments.

We offer industrial valves as Water Type Swing Check Valves, with following features:

• Size: DN 50-300
• Ends: PN 6/ 10/ 16/ ANSI 150
• Pressure Ratings: 16 bar

Materials of Construction:

• Body: Grey Castiron (Epoxy Powder Coated).
• Disc: Carbon Steel (Zinc Plated).
• O-Rings: EPDM, O-Rings are fitted.
• Screw/ Washer: AISI 304.
• Applications: Allows flow in one direction only.

Strainer Valve

• Can be installed in vertical and horizontal lines
• Replaceable mesh
• Size: DN 15-300
• Pressure Rating: 16 bar
• Ends: PN 6/ 10/ 16/ ANSI 150

Our modern production facilities are geared up to produce quality precision parts and components for compressors. The parts are available everywhere with our dealer network. The quality of product you receive from SUPER is unparalleled in the industry. We offer Compressor Spares of the following brands:

• Colt
• Super
• Kirloskar
• Frick
• Accel Sabroe
• Copeland
• Trane
• K.G. Khosla
• Frick Eclipse
• Sinco
• Carrier (Voltas)
• Tecumseh
• Amoking

Ammonia Air Cooling Unit is made using various premium quality raw materials that are durable and also precision engineered. This cooling unit is also accurate and easy to maintain.

Special features of Standard Air Cooling Units:

• Coils are made of heavy class pipe and aluminium fins with excellent bonding between them and that ensure rapid heat absorption from air.
• Adjustable fan blades for higher static pressure/ air throw.
• Weather proof motors with IP-55 enclosure.
• Accumulator (surge drum) to protect liquid stroke to compressor.
• Arrangement for both ceiling suspension and floor mounting on every coil as standard.
• Water defrosting headers.
• Heavy duty angle iron frame work with G.I. Casing.
• Coil and fan guard for safety and protection.

Optional Features (At Extra Cost):

• Hot dip galvanised coil with steel pipe and steel fins.
• Spiral fin coils with spray & hot dip galvanised coil.
• M.S. Fins with tack welding.

Applications of Air Cooling Units above 0°C: These air cooling units are used for Potato, Fruits, Vegetable Cold Storage, Vanaspati Plants, Katha Plants and Milk Processing Units. Applications of Air Cooling Units below 0°C: These are used for Meat, Fish, Ice-Cream, Butter and Freezing Units.

Brine Agitator Type (V-belt Driven) We offer ice making equipment that have been provided with two white metal bearings with water seal at the bottom. These are directly driven by motor. These come in different models suitable for various depth of tanks as per customer's requirements. These models are available in sizes 12", 16", 18" and 20" propeller sizes are 36", 48", 60" lengths as standard depths of tanks. For any special size of lengths please send specifications.

We offer a complete range of cold storage plants and machineries, such as:

• Locks: We offer locks that are made from malleable castings to give high degree of strength. These are also coated with a special paint to prevent rusting.
• Hinges: Their special design makes them tough and rugged for all types of cold storage doors and are made of special quality material.
• Doors: We offer ready to fit hinged type doors that come in sizes ranging from 2100mm x 900mm, 1200mm x 750mm duly fitted in outer frame. These are made complete with lock sets and hinges and are suitably insulated to prevent heat loss.

Super Refrigeration, is the leader in the design of environmental system, is the only company manufacturing a line of complete industrial and commercial air-curtain units. The standard line of units are high velocity units, characterized by unequal compactness non turbulant air flow, even air distribution and free operation at an economical cost. Air Curatins create an invisible barrier of high velocity air to provide complete protection against insects, dust, dirt and fumes from infilterating foods facilities and other clean work areas when the doors are open. Provide constant interior temperature by preventing the entry of hot and cold air. Eliminate pollution and contamination to improve working conditions. Eliminate need of expensive flapper doors of canvas curtains.

Features:

• Design: These are designed for compactness and rigid construction. Balanced centrifugal fan wheels are mounted on both sides of motor shafts. Double ended shafts heavy duty motors provided are secrely mounted inside the equipment.
• Casing: These are fabricated of die formed heavy gauge sheet metal.
• Performance: These have been engineered very carefully for noiseless operation and high performance.
• Finish: These are nicelly painted in different attractive colours.
• Easy Installation & Fast serviving: Are very simple in installation. They are bolted to wall with fastners. The front sheet can be remove for quick servicing. Wheather the air curtain mounted inside or outside the exterior wall, the performance is equally effective.