Sangli, Maharashtra
Home»Our Products»

Ic Engine Lab

Creating a niche of Ic Engine Lab such as Multi Cylinder Petrol Engine Test Rig, Multi Cylinder Petrol Engine Test Rig. With Electrical, 4 Stroke Single Cylinder Petrol Engine Test Rig, 4-Stroke Single Cylinder With Electrical Dynamometer, 2 Stroke Single Cylinder Electrical Dynamometer., 2 Stroke Single Cylinder Petrol Engine Test Rig With Rope and many more items at its best, with utmost quality.


Petrol Engine Test Rig

Item Code: 4-Stroke-Multi-Cylinder

The unit consist of:


  • Engine : Petrol engine test rig consisting of a multi cylinder 4-stroke 4 cylinder petrol engine, developing about 10 Hp at 1500 R.P.M. engine.
  • Loading device: Coupled on a sturdy base with a Hydraulic Dynamometer complete with weighing arm with dead weight in kg.and load cell with load indicator.
  • The unit is accompanied with the following accessories: An ignition switch, a radiator, a self starter, a battery ammeter, a throttle control with an indicator for throttle opening. Special arrangements by switches for cutting off ignition of each cylinder for morse test, all mounted on a suitable panel board, a battery for starting the engine, clutch arrangement.
  • Fuel arrangement: Fuel tank mounted on a sturdy iron stand burette tube, 3 -way cock connecting tube, a stop watch.
  • Cooling water arrangement: Cooling water arrangement by cooling pipings. A Measuring Jar to determine the discharge of cooling water. Special arrangement to use either radiator or external cooling water supply system.
  • Exhaust gas temperature (Digital temp. indicator)
  • Air intake measurement:  Air intake reservoir with orifice plate & Differential manometer.

 

Service required:

 

  • 230 V. A.C. supply earthing connection.
  • Rigid foundation to absorb the vibration.
  • Water supply and piping to & from engine, calorimeter & dynamometer to be provided by Institute.
  • Petrol/Diesel for Testing.

Petrol Engine Test Rig

Item Code: Electrical-Multi-Cylinder

The unit consist of:


  • Engine : Petrol engine test rig consisting of a multi cylinder 4- stroke 4 cylinder petrol engine, developing about 10 H.P. at 1500 R.P.M. engine.
  • Loading device: Electrical Dynamometer: A suitable capacity generator
  • With water rheostat, load bank & load measurement arrangement.
  • The unit is accompanied with the following accessories: An ignition switch, a radiator, a self starter, a battery ammeter, a throttle control. Special arrangements by switches for cutting off ignition of each cylinder for morse test, all mounted on a suitable panel board, a battery for starting the engine, clutch arrangement.
  • Fuel arrangement: Fuel tank mounted on a sturdy iron stand burette tube, 3 -way cock connecting tube, a stop watch.
  • Cooling water arrangement: Cooling water arrangement by cooling pipings. A Measuring Jar to determine the discharge of cooling water. Special arrangement to use either radiator or external cooling water supply system.
  • Exhaust gas temperature: (Digital temp. indicator)
  • Air intake measurement: Air intake reservoir with orifice plate & Differential manometer.


Service required:


  • 230 V. A.C. supply earthing connection.
  • Rigid foundation to absorb the vibration.
  • Water supply and piping to & from engine, calorimeter & dynamometer to be provided by Institute.
  • Petrol/Diesel for Testing.

Petrol Engine Test Rig

Petrol Engine Test Rig
Petrol Engine Test Rig

Item Code: 4-Stroke-Single-Cylinder

The comprises of air cooled petrol engine provided with rope brake dynamometer. Rope brake is water cooled. Temperatures are measured by a digital temperature indicator. Various measurements provided enable to determine B. H. P., fuel and air intake & brake thermal efficiency, at various loads.

 

Specification:


  • Engine: Air cooled petrol engine developing 3 Hp at 3000 RPM
  • Rope brake: Dia. 260 mm, coupled to engine with rope wound around the drum. Spring balance & dead weights for loading the engine. Water cooling arrangement for the drum.
  • Air intake measurement: Intake tank of 250 x 250 x 250 mm fitted with orifice and water manometer.
  • Fuel intake measurement: Calibrated burette with three way cock assembly for cutting off the fuel supply from the tank.
  • Exhaust gas calorimeter: Water cooled exhaust gas calorimeter, shell and coil type to study the heat lost to exhaust gases. Multichannel digital temperature indicator for measuring inlet & outlet temperatures of exhaust gases and water.

 

Service required:


  • Suitable foundation for the set up.
  • 230 V, 60 Hz, AC supply.
  • Water supply and piping to & from engine, calorimeter & dynamometer to be provided by Institute.
  • Tachometer, 0-9999 rpm, contacts type.
  • Petrol/Diesel for Testing.

4 Stroke Petrol Engine Test Rig

The comprises of air cooled petrol engine provided with Electrical dynamometer. Various measurements provided enable to determine B. H. P., fuel and air intake & brake thermal efficiency, at various loads.

 

Specification:


  • Engine: - 150 cc, horizontal cylinder, air cooled petrol engine.
  • Electrical Dynamometer: - A D. C. generator, with loading arrangement upto 2 Kw. Motor CMR rated as per IS 4722 [Temp. rising test as per IS 4722). Four air heaters of 500 Kw.
  • Air intake measurement: - Intake tank of 250 x 250 x 250 mm fitted with orifice and water manometer.
  • Fuel intake measurement: - Calibrated burette with three way cock assembly for cutting off the fuel supply from the tank.
  • Exhaust gas calorimeter: - Water cooled exhaust gas calorimeter, shell and coil type to study the heat lost to exhaust gases. Multichannel digital temperature indicator for measuring inlet & outlet temperatures of exhaust gases and water.

 

Service required:


  • Suitable foundation for the set up.
  • 230 v, 60 Hz, AC supply.
  • Water supply and piping to & from engine, calorimeter & dynamometer to be provided by Institute.
  • Tachometer, 0-9999 rpm, contact type.
  • Petrol/Diesel for Testing.

Petrol Engine Test Rig

Item Code: 2-Stroke-Cylinder

The comprises of air cooled petrol engine provided with Rope Brake dynamometer. Various measurements provided enable to determine B. H. P., fuel and air intake & brake thermal efficiency, at various loads.

Specifications:

  • Engine: 150 cc, horizontal cylinder, air cooled petrol engine.
  • Rope Brake Dynamometer. Brake Drum, Rope, Loading arrangement, etc.
  • Air intake measurement: Intake tank of 250 x 250 x 250 mm fitted with orifice and water manometer.
  • Fuel intake measurement: Calibrated burette with three way cock assembly for cutting off the fuel supply from the tank.
  • Exhaust gas calorimeter: Water cooled exhaust gas calorimeter, shell and coil type to study the heat lost to exhaust gases. Multichannel digital temperature indicator for measuring inlet & outlet temperatures of exhaust gases and water.

Service Required:

  • Suitable foundation for the set up.
  • 230 V, 60 Hz, A. C. supply.
  • Water supply and piping to & from engine, calorimeter & dynamometer to be provided by Institute.
  • Tachometer, 0-9999 rpm, contact type.
  • Petrol/Diesel for Testing.

Diesel Engine Test Rig

Item Code: Single-Cylinder

The unit consist of a 4-stroke diesel engine coupled to a rope brake dynamometer. A water cooled brake drum along with spring balances is provided. A Rope brake arrangement is provided to load the engine.

Specification:

  • Diesel engine of 5 Hp capacity, 1500 R. P. M. 4-stroke vertical, single cylinder engine.
  • Loading device-Rope brake consisting of a brake drum of size suitable diameter & rope brake arrangement with rope, hand wheel, spring balances.
  • Fuel measuring arrangement-Consisting of a fuel tank, mounted on a strong iron stand, measurement of fuel consumption by a burette & 3- way cock. Connecting tube, a stop watch.
  • Cooling water arrangement: Cooling pipes, thermocouples, measuring flask to determine the discharge of cooling water & heat carried away by cooling water.
  • Exhaust gas temperature (digital temp. indicator)
  • Air intake measurement: Air tank reservoir of size 0.5 m. x 0.5 m. x 0.5 m. with orifice plate, differential manometer, connecting hose.

Range Of Experiment:

To determine the

  • B. H. P. & I. Hp
  • Mechanical and Thermal efficiencies.
  • Air fuel ratio.
  • Specific fuel consumption.
  • Heat balance sheet.
  • At various load conditions.

Service Required:

  • Rigid foundation to absorb the vibration.
  • Water supply and piping to & from engine, calorimeter & dynamometer to be provided by Institute.
  • 230 V, A. C. supply with earthing connection.
  • Petrol/Diesel for Testing.

Diesel Engine Test Rig

Item Code: Electrical-Dynamometer

The unit consist of a 4-stroke diesel engine coupled to an Electrical Dynamometer. A water cooled brake drum along with spring balances is provided. For Electrical Dynamometer water rheostat is used as loading arrangement.

Specification:

  • Diesel engine of 5 Hp capacity, 1500 R. P. M. 4-stroke vertical, single cylinder engine.
  • Electric Dynamometer:  A D.C. generator, with loading arrangement upto 2 Kw.
  • Four air heater of 500 Kw.
  • Fuel measuring arrangemen: Consisting of a fuel tank, mounted on a strong iron stand, measurement of a fuel consumption by a burette & 3- way cock. Connecting tube, a stop watch.
  • Cooling water arrangement: Cooling pipes, thermocouples, measuring flask to determine the discharge of cooling water & heat carried away by cooling water.
  • Exhaust gas temperature (digital temp. indicator)
  • Air intake measurement: Air tank reservoir of size 0.4 m. x 0.4 m. x 0.4 m. with orifice plate, differential manometer, connecting hose.

Range Of Experiment:


To determine the

  • B. H. P. & I. H. P.
  • Mechanical and Thermal efficiencies.
  • Air fuel ratio.
  • Specific fuel consumption.
  • Heat balance sheet.
  • At various load conditions.

Service Required:


  • Rigid foundation to absorb the vibration.
  • Water supply and piping to & from engine, calorimeter & dynamometer to be provided by Institute.
  • 230 V, A. C. supply with earthing connection.
  • Petrol/Diesel for Testing.

Diesel Engine Test Rig

Diesel Engine Test Rig
Diesel Engine Test Rig

Item Code: Multi-Cylinder

The unit consist of:

  • Engine :- Diesel engine test rig consisting of a multi cylinder 4- stroke 4 cylinder Diesel engine, developing about 30 H.P. at 3000 R.P.M. engine.
  • Loading device - Electrical Dynamometer: A suitable capacity generator with water rheostat, load bank & load measurement arrangement.
  • The unit is accompanied with the following accessories:- An ignition switch, a radiator, a self starter, a battery ammeter, a throttle control. Special arrangements by switches for cutting off ignition of each cylinder for morse test, all mounted on a suitable panel board, a battery for starting the engine, clutch arrangement.
  • Fuel arrangement: - Fuel tank mounted on a sturdy iron stand burette tube, 3 -way cock connecting tube, a stop watch.
  • Cooling water arrangement:-Cooling water arrangement by cooling pipings. A Measuring Jar to determine the discharge of cooling water. Special arrangement to use either radiator or external cooling water supply system.
  • Exhaust gas temperature (Digital temp. indicator)
  • Air intake measurement: - Air intake reservoir with orifice plate & Differential manometer.

Service Required:

  • 230 V. A.C. supply earthing connection.
  • Rigid foundation to absorb the vibration.
  • Water supply and piping to & from engine, calorimeter & dynamometer to be provided by Institute.
  • Petrol / Diesel for Testing.

 

Super Tech Equipments

Mr. Abhijeet Bandu Ghatge (Proprietor)
J17/1/2, MIDC, Kupwad, Tal- Miraj
Sangli - 416425
Maharashtra, India
© Super Tech Equipments. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited