SS ARG 500 is a Super wetting Agent, which have a low molecular weight nonionic silicone polyether surfactant, developed to improve the wetting, spreading and penetration of agricultural chemicals. It may be used as a formulation ingredient in pesticide products, or as a tank-mix adjuvant for foliar applied chemicals

APPLICATIONS:
 · To enhance the performance of agricultural chemicals, especially water-soluble
broadleaf herbicides, insecticides, fungicides and plant growth regulators
· “Use as an adjuvant” refers to the use of this product as an additive to a pesticide for the purpose of enhancing the pesticide’s effectiveness for wetting more of the leaf surface (delivering the pesticide to a greater surface area for increased leaf penetration) and thereby providing rain fastness. i.e., herbicides
are not washed off by rainfall because they have penetrated into the plant surface.

PRODUCT CHARACTERISTICS: 


1   Type   :   Non-Ionic Silicone  surfactant.
2   Appearance: Clear amber colored liquid
3   Viscosity  : 30-60 cps
4   Density   : 0.99-1.1
5   Refractive index  :   1.445-1.460
6.  Flash Point, closed cup °C (°F) >100 (>212)
 
7.  Solids percent:  100%
 

Recommended Dosages  SS ARG 500 Super wetting Agent should be used 0.15 to 0.35 percent of total formulation required.

CHARACTERISTICS
 
· SS ARG 500 Super wetting Agent reduces the surface tension of aqueous agricultural mixtures significantly lower than is achievable with conventional nonionic surfactants, at concentrations as low as 0.01 percent.
 
· SS ARG 500 Super wetting Agent reduces surface tension below 22 dynes/cm, which produces very rapid wetting and spreading on hard-to-wet surfaces such as waxy leaves. Thus, complete coverage can be achieved with herbicides, insecticides, fungicides and other agricultural chemicals.
 
· In addition to the rapid wetting and spreading, SS ARG 500 Super wetting Agent also greatly increases the uptake of chemicals into
plant tissues.
 
 · Adding SS ARG 500   Super wetting Agent to a herbicide tank-mix may significantly enhance its efficacy, particularly in the
control of broadleaf weeds with water soluble herbicides. The rapid uptake produces “Rain fastness”.
 
·SS ARG 500 Super wetting Agent may be added to tank-mixes to
enhance the biological performance of the spray solution. With herbicides,

We are manufacturing and exporting a wide gamut of Antifoam Compound– Activated Silicone Fluid, which has excellent properties including low volatility and resistance to silica separation. With the latest technology, this fluid is designed to provide optimum antifoam performance combined with good foam knock down performance. It should be handled carefully to avoid any harm to human life.
 
Applications:  

• Possible application areas include liquid fertilizer industry, paint, pulp and paper, industrial cleaning, wastewater treatment, agrochemicals, inks, dyes and textiles.
• Useful in packaging aqueous solutions such as soaps, shampoos, hair conditioners and prepared douches where foaming can impede operations

 
Features:

• Stable over wide pH range
• Very good foam knocks down performance            
• Excellent foam control persistence            
• Easy to disperse in non-aqueous systems
• Complies with key chemical control laws and regulations

 
Advantages:
 

• Excellent properties including low volatility and resistance to silica separation
• One of the fastest deformers of any Simethicone made
• Demonstrates bubble-coalescing activity and lubricity

 
Properties:
 

Property	Unit	Value
Appearance		Translucent
Viscosity	cSt	>2000
Solid Content	%	100
Diluents		Kerosene, Toluene, MEK, Benzene, Xylene
Performance	Sec.	<15

 
How to use:
 

• Should be diluted with (compatible) diluents prior to use to accelerate dispersion in the foaming medium
• Composition: 1 part Supreme Silicones Antifoam Fluid with 5 parts of diluents
• Add the diluents to the fluid and not vice versa
• Excessive shear should be avoided
• Should be tested before use
• Starting concentration should be 500 ppm Supreme Silicones Antifoam Fluid

 
Handling Precautions:
 

• Read product and safety data sheets and container labels for safe use
• Physical and health hazard information should be followed strictly

 
Usable Life and Storage:
 

• Should be used within 12 months from manufacturing date
• Should be stored between 5°C (41F) and 35°C (95F) in the original unopened containers
• Supreme Silicones Antifoam Fluid is unaffected by freeze/thaw cycles
• In case of freezing, it should be stored at room temp

INTRODUCTION  
SUPREME SILICONES SS-SF offers a wide range of silicone fluids in various viscosities that have a combination of properties that give superior performance in a wide variety of applications

DESCRIPTION  
SS-SF are clear, white, inert and odourless dimethyl polysiloxane fluids. The actual viscosity is controlled within + 5% of the desired viscosity. These fluids are manufactured in the viscosity range from 20 cps to 300000 cps. Supreme also manufactures B.P. Grade Dimethicone in the viscosity range of 50 cps to 1000 cps. Intermediate viscosity grades are also available upon request.
 In chemical structure Dimethyl silicone fluids are quite different from other fluids having a backbone of silicon-oxygen linkage. The advantage of this is a linkage much stronger than a typical carbon-carbon chain and is more resistant to attack by temperature extremes, oxidation, shear stresses and chemicals than other similar organic fluids and also show good dielectric properties. SS-SF  
Silicone fluids are soluble in hydrocarbon solvents, chlorinated hydrocarbon solvents and low molecular weight aromatic solvents. They have limited solubility in alcohols, ethers, acetone and glycols (Solubility here depending on viscosity)

	PARAMETERS		SS-SF-100	SS-SF-350	SS-SF 1000
1		Appearance	Colorless	Do	Do
		Nominal Viscosity at 25°C (cps)	100	350	1000
3		Volatile Weight loss for 1 hrs at 150 0°C (%)	<1.0	<1.0	<1.0
4		Acid Number	<0.20	<0.20	<0.20
5		Specific Gravity at 25°C	0.965	0.973	0.974
6		Refractive Index at 25°C	1.405	1.405	1.405
7		Flash Point Open Cup (°C)	>240	>260	>260

SS-SOF 80 EXL is micro emulsion of amino modified silicone fluid that gives excellent smoothness along with softness and durability, with unique handle.
Features
·        Gives an excellent surface smoothness and softness with unique handle
·        Resistant to washing and abrasion
·        Low Yellowing
·        It is  dilution stable
·        Compatible with other finishing agents
·        SS-SOF 80EXL stable in up to 800-ppm hard water and 0.2% electrolyte.
·        Antistatic
 
Applications
SS-SOF 80 EXL can be a used in textile (Cloth & Garments) & leather to generate surface smoothness with a soft handle, suppleness & silky finish that is capable of withstanding repeated washing cycles. They are especially useful for cottons, sarees, suiting, etc to impart softness and body to the fabric. SS-SOF 80 EXL gives excellent softness with elastomeric feel and also gives inner softness. The product can be used by both methods i.e. padding as well as exhaust.  
Product Data-Chart

Product Name	Appearance	PH	Solid  Content
SS-SOF 80 EXL	Clear transparent liquid with slight bluish tinge	6 - 8	28 – 32

¹

SILICONE GREASE 

Description:

• Supreme Silicones’ High-Vacuum Grease is a stiff, non melting silicone lubricating material that maintains its consistency from -40 to 204°C (-40 to 400°F)
• It is used in applications similar to those for Supreme Silicones’ Stopcock Grease, and is the recommended replacement for that product
• Supreme Silicones’ High-Vacuum Grease is recommended for vacuums reaching between 1 x 10-5 and 1 x 10-6 mm Hg
• It is recommended that the grease be preconditioned under vacuum and temperature until these limits are reached

 
Application Areas:

• Seal and lubricate chemical processing equipment
• Lubricate plug valves, control valves, flow meter bearings, ceramic plug cocks and fire extinguisher valves
• Maintain vacuum and pressure systems
• Lubricate water-treating equipment
• Lubricate synthetic rubber gaskets and seals in high-temperature applications
• Lubricate laboratory equipment
• Lubricate O-rings on binoculars and telescopes
• Help prevent fogging of delicate lenses

 
Features:

• Low volatility to hold deep    Vacuums
• Resists oxidation
• Non melting
• Good thermal stability

 
Properties:
 

Property	Unit	Value
Appearance		Translucent white
Service Temperature Range1	°C	-40 to 225
Total Active content	%	20
Specific Gravity at 25°C	g/cc	1.0

 
Handling Precautions: 

• Read product and safety data sheets and container labels for safe use
• Physical and health hazard information should be followed strictly

 
Usable Life and Storage:

• 60 months from the date of manufacturing

We are manufacturing a wide variety of Water repellent exterior Coat (SSWR1000), which is used for coating painted surfaces too, as this does not impart any color change to the substrate. It has been proven to be an excellent weather coat for all types of cement and stone surfaces and provide water repellence within 1 hour of application. The water repellence further improves over 8 hours after application.
 
It is a solvent soluble fast curing 30 % reactive silicone and based on silanes and siloxanes. It is also used for imparting a colorless water repellent surface finish to mineral construction material without significantly reducing water vapor permeability.
 
 Applications:
 

• Mineral plasters
• Mineral based natural and artificial stone
• Aerated concrete
• Cement fiberboards
• Mineral paints
• Brick works

 
Features:
 

• Excellent penetration in absorbent mineral building materials
• Very good alkali resistance
• Fast curing hence imparts water repellence soon
• Being neutral in nature, this does not impart any color change to the substrate applied  upon
• Provides excellent water repellence and hence reduces freeze-thaw damage, cracking, spilling, chemical degradation and dirt pick up. All these increase the life of substrate and reduce maintenance cost.
• Soluble in alcohol and petroleum based solvents such as Mineral Turpentine Oil, Diesel, Aromatic & Chlorinated solvents
• The pores and capillaries are not sealed and hence maintain breath ability while preventing water absorption.
• The coatings are UV stable and resistant to biological degradation.

 
General Attributes:
 

Product Code	SSWR1000
Appearance	Clear to slight translucent liquid
Silane /siloxanes	30 %
Viscosity @ 25°C	> 100 cSt
Specific gravity @ 25°C	1

 
How to Use:

• Should be diluted in the ratio of 1:6 in terms of weight
• Suitable diluents: alcohol and petroleum based solvents such as Mineral Turpentine Oil, Diesel, aromatic & Chlorinated solvents
• The substrate should be air dry and absorbent
• The diluted solution should be liberally applied one or two coats, wet on wet, to the surface of material
• It can be applied by brushing or spraying  
• should be diluted with brief stirring as it dissolves spontaneously without affecting its appearance
• Should be used within 24 hours of dilution
• Excellent results can be obtained if SSWR1000 is diluted with suitable solvent in a ratio of 1:10 for vertical surface and 1:5 for horizontal surface

 
Storage and Handling:
 

• Should be stored at temperatures between 0°C and 30°C in tightly closed original container

• Should be avoided from direct sunlight
• Shelf life of at least 6 months when stored in original unopened containers kept at 25°C
• Safety goggles, and hand gloves must be used for personal protection while handling the product

We are manufacturing and exporting a wide gamut of Shining Emulsion, which is used as a shining agent for plastic, rubber, metal, wood, leather and others. It is used for releasing a wide variety of articles and components, which are required for post finishing. These have been appreciated for their durability and high water dilution quality.
 
Applications:
 

• For release of a wide variety of articles and components, which require post  Finishing, Fabricating plastic parts and components; examples include rigid polyurethane, Foam, epoxy molded transformers, and fiberglass reinforced polyethylene
• Molding of rubber goods; examples include rubber mats/carpet backing, latex Dipping and mandrel wrapping
• Lubricant for rubber gaskets
• Truck bed release for rubber slurry
• Release of concrete decorative pieces

 
Features:
 

• Efficient shining agent (low Amounts required)
• Good emulsion stability
• Water dilutable

 
Benefits:
 

• Helps to clean, shine and protect the applied area
• Protects from the harmful ultra violet (UV) rays
• Keep dust and water away (water proof)

 
Properties:
 

Property	Unit	Value
Appearance		Milky white emulsion
Viscosity	cPs	4000
pH		7
Total solid content	%	30
Sp. Gravity		0.97- 0.99
Diluents		Water

 
How to Use:
 

• Clean and dry the surface
• Apply the gel uniformly with smooth cotton cloth
• Allow it to dry
• Shine it with the cotton cloth

Sofplus 100 Textile Finishing Fluids are non-reactive amino modified silicone fluids, which give excellent surface efficiency along with softness, durability & Silky finish. These are non reactive, stable and compatible with other finishing agents. These are widely used in various saris, suiting, cottons and other fabrics. The shelf life of the products is nine months and these are available in 50 kg H.D.P.E. carboys and 200-kg drums.
 
Applications:
 

• Can be used textiles & leather to generate surface smoothness with a soft handle
• These are used for cottons, saris, suiting and others

 
Features:
 

• Gives an excellent surface smoothness and softness with a unique handle
• Resistant to washing and abrasion
• Non-Reactive
• Readily form emulsions that are dilution stable
• Amino functional silicone
• Compatible with other finishing agents
• 100% active
• Emulsion stable in up to 600-ppm hard water and 0.1% electrolyte.
• Antistatic
• Essentially Non-Yellowing

 
Product Characteristics:
 

Product Name	SOFPLUS 100
Specific Gravity	0.97
Refractive Index	1.408
mine Value (mg KOH/gm product)	25
Viscosity 25°C in cps  (Brookfield Viscometer)	200
Appearance	Colorless
Clarity	Color less to slightly yellow hazy Liquid
Volatile Content (110°C 1 hr)	<10 %

 
Storage and Handling:
 

• Hand gloves & safety goggles be taken while handling the product.
• The material should be stored in original SUPREME containers in a cool place and protected from direct exposure to sunlight.
• Users are requested to evaluate the recommendations before actual application to get desired performance

We are manufacturing a large quantity of Mould Release Emulsion, which aqueous emulsion of Poly-Dimethyl siloxane. Release Agent consists of a stable 30 % poly dimethyl siloxane fluid in water emulsion. It is also compatible with many others organic finishing agents like paints, coatings, adhesives and others. It is also suitable for the release of articles where post-finishing is required.
 
Applications:
 

• For release of a wide variety of articles and components, which require post
• Finishing
• Fabricating plastic parts and components; examples include rigid polyurethane
• Foam, epoxy molded transformers, and fiberglass reinforced polyethylene
• Molding of rubber goods; examples include rubber mats/carpet backing, latex
• Dipping and mandrel wrapping
• Lubricant for rubber gaskets
• Truck bed release for rubber slurry
• Release of concrete decorative pieces
• Release of PU-Injected-Soles & slippers

 
Features:
 

• Efficient release agent (low  amounts required)
• Good emulsion stability
• Water dilutable

 
Properties:
 

Property	Unit	Value
Appearance		Milky white emulsion
pH		7
Total solid content	%	30
Sp. Gravity		0.97- 0.99
Diluents		Water

 
Benefits:
 

• Excellent for release of  parts that will be coated,  painted, bonded or plated
• Oil phase withstands molding temperatures (no smoking, breakdown, carbonization, buildup on molds and dies)

 
How to Use:
 

• Should be diluted first and applied with brush, wipe or spray
• Starting dilution should be 1:10 (Mould Release Agent to water).
• Test sample should be taken before use
• Breaking in the surface freshly cleaned molds is best done by applying a light coat of undiluted release agent is recommended
• After excess residual base fluid is wiped from the surface, the mold is ready for use

 
Handling Precautions:
 

• Read product and safety data sheets and container labels for safe use
• Physical and health hazard information should be followed strictly

 
Usable Life and Storage:
 

• Should be stored between 5°C (41F) and 35°C (95F) in the original unopened containers
• Emulsion has a usable life of 6 Months from the date of manufacture

• Unaffected by freeze/thaw cycles
• Should be remixed before use
• In case of freezing, it should be stored at room temperature to melt

We are manufacturing and exporting an assortment of Powder Antifoam, which is available in 50 and 200 kg packing and used in wash foam-control for laundry powder detergents. These are stored between 5°C (41F) and 35°C (95F) in the original unopened containers and have a usable life of 12 Months from the date of manufacturing.
 
This product is never suggested for medical or pharmaceutical users. Further, our company backed up with team of Product Safety and Regulatory Compliance (PS&RC) specialists, is always available for any kind of health and environmental related information.
 
 
Features:
 

• Active at low addition levels
• No performance loss on storage under warm and humid conditions in the detergent powder
• Free flowing, easy to incorporate by dry mixing
• 100% detergent active components
• Suitable for a wide range of surfactants, over a wide range of pH and washing temperatures
• Performance not dependent on water hardness

 
Properties:
 

Property	Unit	Value
Appearance		White Powder
pH (10% sol.)		7
Bulk density	g/l	740

 
How to Use:

• Dry mixing is recommended with laundry detergents
• Typical addition levels should be between 0.5 and 3.5%.
• The exact level of addition needs to be assessed individually
• It is used to control the foam throughout the wash cycle (40°C and 95°C wash, 3.5kg load)
  

Handling Precautions:  

• Read product and safety data sheets and container labels for safe use
• Physical and health hazard information should be followed strictly

 
Stability Characteristics in Detergent Powder:
 

• Powdered Antifoam is stable when stored in the detergent formulation even under warm and humid conditions
• No performance loss is observed between freshly mixed composition and a sample

Our range of Antifoam Emulsion is widely used for various applications such as liquid fertilizer industry, paint, pulp and paper, industrial cleaning, wastewater treatment, agrochemicals, inks, dyes, textiles and others. It has been appreciated for its good dilution stability and good foam knocks down performance.
 
Supreme Silicones Antifoam Emulsion is available in 50 and 200 kg drums and to facilitate our clients we also provide samples, which are available in 100 ml bottles. Further, our company backed up with team of Product Safety and Regulatory Compliance (PS&RC) specialists, is always available for any kind of health and environmental related information.
 
Features:
 

• Stable over wide pH range
• Very good foam knocks down performance            
• Excellent foam control persistence
• Easy to disperse in aqueous systems
• Dilution stable for several weeks at 2% active content in tap and dematerialized water
• Complies with key chemical control laws and regulations

 
Properties:
 

Property	Unit	Emulsion
Appearance		Milky-white
Viscosity	cPs	80
pH		7
Total Solid content	%	30
Emulsifier type		Non-ionic
Diluents		Water

 
How to Use:

• Should be diluted with water prior to use to accelerate dispersion in the foaming medium
• Composition: 1 part Supreme Silicones Antifoam Emulsion with 5 parts water
• Add water to the emulsion and not vice versa
• Avoid excessive shear
• Pre-process testing is recommended
• Starting concentration should be 500 ppm Supreme Silicones Antifoam Emulsion

 
Handling Precautions:  

• Read product and safety data sheets and container labels for safe use
• Physical and health hazard information should be followed strictly
• This product is neither tested nor represented as suitable for medical or pharmaceutical uses

 
Usable Life and Storage:
 

• Should be stored between 5°C and 45°C in the original unopened containers
• Should be used before 8 – 10 months from manufacturing date
• Unaffected by freeze/thaw cycles
• Should be remixed before use
• In case of freezing, it should be stored at room temperature to melt

We are processing a qualitative Water Repellent solutions, which is Water-dilutable Silicone based solution and available in yellow color. It is available in 50 and 200 kg drums and to facilitate our clients we can also provide samples in 100 & 200 ml bottles.
 
The products is widely used as an Additive for clays, ceramics, starches, latex paints, Mixed with sodium silicate for use as a binder in pigmented  paints, Making plastered surface water repellent and many other applications.
 
Applications:

• Surface treatment for concrete
• Making manufactured and natural stones water repellent
• Making aerated concrete water repellent
• Low - fired clay products immediately after they have been made : e.g., roof tiles, facing bricks, floor tiles, and flower pots.
• Injection into buildings just above ground level to form a damp course
• Additive for clays, ceramics, starches, latex paints
• Primer for emulsion paints and plasters
• Mixed with sodium silicate for use as a binder in pigmented  paints
• Making plastered surface water repellent

Description:

• Water repellent for masonry surfaces (SS WR 100) is Silicone Based water dilutable solution having slightly yellowish appearance used for imparting a colorless water repellent surface finish to mineral construction material without significantly reducing water vapor permeability
• It is also used to provide a barrier against rising damp and the treatment remains effective for 10 to 20 years.
• SSWR 100 provides its water repellent properties by reaction with atmospheric carbon dioxide, the active substance formed is polymethylsilicic acid
• As a surface treatment in applications that utilize its ability to impart a water repellent surface and reduce water absorption
• For use on bricks, sandstone, limestone, Cement and ceramics

Features:

• Imparts water repellency to a wide variety of substances
• Coverage on normal Concrete: 600 sq. ft

 
Properties:
 

Property	Unit	Value
Viscosity By B5	cps	Max 100
Specific Gravity		1.25
Flash Point, open cup	°C	>93
pH		13
Solvent		Water
Toxicity		Non Toxic
Application temp. Range	°C	10-50
Pot life          &am