Computersied interferntial therapy unit in the interferential therapy, we make use of two medium frequency alternatively currents. These medium frequency currents are not indentical & may differ in frequency up to 150 hz. Two oscillator of medium frequency are generated & are cross wisely applied to the body by means of four electrode pads . [ ( ch1) & (ch2) ] each channel with one pair of pads i. E. Two no. Of pads. One oscillator has a fixed frequency of 4000 hz the other can be ranged in the freq. Between 3850 hz.
both oscillator interfere i. E. Intersect inside the body resulting in a modulated signal as a carrier & low frequency part ( the difference in frequency) for the actual therapy.
in simple words, we can define the interferential therapy as when two medium frequency currents i. E. Ch1 & ch2 intersects with each other , leading interference currents to be generated at the place.
for example, let us take two medium frequency current, current in ch1 = 4000 hz. & in ch2 = 3850 hz. These two currents are applied to any part of the body ( or a tissue ) at the points where the current cross each other. The new beat frequency current set up is amplified which is been modulated i. E. Amf amplified modulated medium frequency ) & the frequencies of the new current is called interferential current which is 150 hz) by varying the constant frequency of the first it is possible to producer a range of beat frequencies deep in the patients tissue. Thus it is possible to create any desired frequency rate in the carrier currents.
sailent features - user friendly can be easily operated .
- totally father touch
- digital 7 segment display for actual current indication for both the individual channels.
- direct beat frequency control and digital display easily available.
- totally computersied unit
- scan mode (continous & other )
- light weight easily portable and serviceable.
- safe start feature
- 50 pre fixed programes
blank
| operating voltage | 230 volts ac supply 50 hz, 5 ac current. |
| output type | 100% isolated |
| medium frequency | 4 khz , 2. 5 khz, tns mode |
| output | two separate outputs ch-1 & ch-2 |
| output current | 0 to 50 ma |
| output frequency | freq. On selection of scan. Ch-2 - 4000 hz [constant] |
| display | interference frequency indicator by 3 digit digital seven seg. Display. |
| timer | 0 – 99 minutes can be varied |
| scan patterns | rectangular, trapezoidal, triangular |
| therapy modes | 4 pole interferential therapy, 4 pole vector interferential therapy, |
| | 2 pole interferential therapy. |