Vibratory Roller

Walk Behind Roller Vibrotech T - 80
Due to its compact design, the VIBROTECH T-80 is the ideal roller for small repairs in both Base and asphalt course.s Windening of roads, Horticulture, Landscaps Gardening, Internal roads in complex.

Its low overall height and closely set drums provides a clear view of the entire working area, ensures high manoeuverability.

Inspite of its relatively low weight, the use of double drums, results high compaction performance and has necessary gradient climbing ability.

No Gear Box, Drive is Hydraulic hence Very Less Down Time, No failure Total Maintenance Free Machine.

Speed for both Forward and Rverse remains same and being hydraulic, it has more power than Mechanical Type Rollers.

Features: Two "V" belts synchronizes the action of both drum vibrators. The eccentric weights are positioned 180* Out of phase to each other.

Drive: Traction drive via hydraulic motor., Positive with spring action.

Operating: Individual control lever for the traction and vibration, located at easy reach.

Weight / Measurements

Static Weight	800 kgs.
Drum Width	690 mm
Drum Dia	400 mm
Drum Shell Tks	10 mm

Vibration

System	Hydraulic
Frequency	Hz 50
Centrifugal Force	kN 19.6
Total Applied Force	kgs. 2800

Drive

Air-cooled Diesel Engine	Greaves
Type	GA-75
Mode	G - 1450
Performance (Din. 6270 at 3000 rpm)	Kw/HP 5.9 / 8.0
Travel Speed	Km/Hr. 0 - 2.5

Capacity

Hydraulic Oil Tank Litres	25.00
Fuel Tank Cap.	5.50
Water	25.00
Both tank for oil
One tank for water and another for hydraulic oil

Gradebility

With Vibration	30o
Without Vibration	35o

Transmission

Drive	Hydraulic
Vibration	Hydraulic

Optional Accessores

• Water Sprinkler Type gravity
• Remote Mounting 12V Dynastart with pulley
• 12 V Electric Start.

Small Ride - On Type Vibratory Roller with Hydraulic Drive and Vibration model Vibrotech T - 110 powered with Greaves type GA - 75, Mode G-1510,
Performance Kw/HP 7.5/10

• Small Ride - On Type Vibratory Roller
• Maximum Curb Clearance upto 300 mm
• The First Indigenous in its range.

Its low overall height and closely set drums provides a clear view of the entir working area, ensures high maneuverability with hydraulic steering 30^o either side.

In spite of its low weight, the use of double drums, results into high compaction performance and has necessary gradient climbing ability.

Hydraulic Traction and Vibration Minimises Maintenance.

Traction: Hydraulic Motor on both drums.

Controls: Individual control for traction, vibration and Steering located at easy reach.

Weight / Measurements

Static Weight	1100 Kgs.
Drum Width	70 mm
Drum Dia.	480 mm
Drum Shell Tks	10 mm
Overall Width	820 mm
Overall Length	1180 mm
Overall Length Width Seat	1860 mm

Vibration

System	Hydraulic
Frequency	50 - 55 Hz
Centrifugal Force	Kn 2.8
Total Applied Force	Kgs. 400

Steering

Steering System	Articulated
Steering Method	Hydraulic
Steering Angle	30o

Capacity

Hydraulic Oil Tank	Liters 40
Fuel Tank Capacity	Liters 5.5
Water Tank Capacity	Liters 40

Transmission

Drive	Hydraulic
Vibration	Hydraulic
Steering	Hydraulic

Gradebility

With Vibration	25o
Without Vibration	30o

Sprinkler

• Water Sprinkler Tyep Gravity.

Drive

Air cooled Diesel Engine	Greaves
Type	GA - 75
Model	G - 1510
Performance (Din 6270 at 3000 rpm)	Kw/HP 7.5/10
Travel Speed	Km / hr. 0-1.5
Starting	12 V.D.C. Elect.

This is highly maneuverable machine designed for edge compaction for widning Road Construction, Patch Work, Trench Compaction, Playgrounds and Factory Buildings, Parking Lots and etc.

The reliable technology of our roller has convinced many users and will certainly convince you too.