Blasting machine is a 3 blast wheel continuous hanger type shot blasting machine which can handle components of size ø1850 mm dia & 1600 mm Long with Components Weight up to 500Kg each. Hanger type shot blasting machine has closed loops. It is a continuous duty machine with automatic door opening & closing by pneumatic cylinder through plc programming. The components spin clockwise & counter clockwise during blasting. The components are to be loaded and unloaded at loading and unloading stations respectively.

Send Query

We manufacturer surface airless shot blasting M/C tumblast type model TB-20"X 27". Tumblast airless shot blasting machines are highly suitable for small component with weight varying from few grams to 6 kg/per piece and component have a geometry to effectively tumble in group, so that all faces of the component are exposed to the blasting stream. Machine find application in foundries, forging heat treatment industries beside dicasting units. These machine are most cost affective as far as output to power consumplion ratio is concerned. Tumblast airless shot blasting machines are available in bigger models like 27”x36”(5cft) 14 cft & 32 cft capacities.

Send Query

We offer surface shot blasting machine rotary barrel type model RBF-1, also known as rotary shot blasting machine. This is probably the smallest batch cleaning machine in family of Airless Blasting machines with Capacity 1.5 cft (100 Kg) material. This is a smaller version of tumblast machine and has power consumplion of only 5 H.P. The rotary shot blasting machine is provided with a control panel and electronic timer as standard supply. The machine is suitable for small job shops, dicasting units, foundries & forging units.

Send Query

This is cabinet type pneumatic super blaster machine that works on suction principle of lifting abrasure media to the blasting gun. High pressure compressed air when injected through venturie creates suction on the side of air injection. This suction pressure so created is used to lift abrasives which mixes with the high velocity compressed air creating soft blasting. These super blaster machine are used for glass bead blasting, alumina blasting of soft metals like aluminum dicasting, carving on glasses, roughening of stones. Various standard and special size machine are available for selection.

Send Query

To effectively blast clean big components surface international provide blast room systems, or abrasive recovery system. These blast room are equipped with proper light, dust collector, main door with louvres & portable blasting machine. The abrasive recovery system of the blast room can be mini hopper type where in the abrasives falling in to the hopper are carried to the cyclone with suction air current. These abrasives get cleaned during the process & recirculated. The other type of abrasive recovery system is mechanical recovery system with screw conveyors & bucket elevators. These system also conveys the material to the blasting machine through screw conveyor & bucket elevator system and the abrasives get cleaned in the course of movement to the portable blasting machine.

Send Query

We offer surface gunning machine and refractory gunning machine model D6/D6-R. Refractory gunning machine is widely used for repairing of electric arc furnace AOD, VOD, in hot and cold conditions. The main advantage of this refractory gunning machine is achieved when furnaces are repaired in hot condition. The time required for cooling and then again heating of the furnace along with the thermal losses are prevented, thereby lot of savings in terms of Power loss are achieved, also the availability of furnace is substantially increased.

These surface gunning machines are manufactured in two sizes – D-3R and D-6R with output range of 1.0 to 2.0 m3/hr. Bigger models are available in rotary gunning designs where 5 to 6 m3/hr output. Surface gunning machines are also used for Injection of Coke in molten metal bath for making alloy steel. These machines are also used for foamy slag application in steel melting units. The machine entails features like remote control system, vibrating silo, semi-wet nozzle, refractory gunning nozzles, and coke injection nozzles. The refractory material is conveyed Dry from the machine to the nozzle point and Hydration as required is done at nozzle point just before spraying.

Send Query