We are specializing in the manufacture of top quality Hanger Type Machine that is most suitable where the relevant component is to be hanged and it can be rotated. We are making available different types of hanger machines that includes Close Loop Type, Continuous Monorail, T-Type, Y-Type and also Continuous Hanger Type. These machines are available in different capacities.

DESCRIPTION	ASH-1	ASH-2	ASH-3	ASH-4	ASH-5	ASH-6	ASH-7	ASH-8
No. of Blast Wheel	2	2	2	2	2	2	2	2
Size of Blast Wheel	12½"	12½"	12½"	12½"	12½"	12½"	12½"	12½"
Flow Rate Hr/Wheel	3000	3000	5000	3000	5000	3000	5000	5000
H.P. of Blast Wheel	5	5	7.5	5	7.5	5	7.5	7.5
Load Carrying Capacity of Hanger	300 Kgs.	300 Kgs.	300 Kgs.	300 Kgs.	300 Kgs.	300 Kgs.	300 Kgs.	300 Kgs.
R.P.M. of Hanger	6-12	6-12	6-12	6-12	6-12	6-12	6-12	6-12

Pneumatic Recovery Works best with light weight media,such as agricultural, plastic, glass bead or aluminium oxide. In Surfex section Pneumatic Recovery Sysyem,  dust and media fall through funnel shaped holes into channels beneath the floor. High velocity air carries this media and dust to the reclaimer. Because there are no moving parts, pneumatic floors are simple to operate and maintain. Pneumatic recovery requires the use of a reclaimer-a type of cyclone separator to separate blast media from the dust , debris and fines.

Rotary Barrel type shot blasting machine designed for shot blast cleaning of small or medium size iron, steel, alloy and non-ferrous castings, forgings.

Description	Model RBC-1	Model RBF-1
Flow Rate of Wheel (Kg./Hr.)	1135	1135
Barrel Size (mm)	575 x 625 Length	575 x 625 Length
Barrel Capacity (Kg.)	100	100
Barrel Effective Volume (cft)	1.5	1.5
Barrel RPM	5-7	5-7
Loading Height (mm)	370	370
Type of Dust Collector	Cyclone	Fabric Bag
Dust Collector Capacity (cfm)	400	400
Hp of Dust Collector	1	1
Total Power Requirement (HP)	5	5
Initial Charge of Abrasive (Kg.)	35	35
Abrasive Blast Cleaning Cycle	15-20 Min. for Cast Iron	15-20 Min. for Cast Iron
Dimension of Machine with Dust Collector
Length (mm)	2600	2100
Width (mm)	1100	1700
Height (mm)	1800	2100
Dimension of Dust Collector
Length (mm)	1100	900
Width (mm)	600	700
Height (mm)	1800	2100
Floor Space required for Machine with Dust Collector
Length (mm)	3000	3400
Width (mm)	1900	2500

Our top quality range includes shot blasting machine that is used for manual blasting of workpieces of arbitrary size and shape and for varied other blasting purposes. It consists of following machines and sets :
Air Shot Blasting Machines These machines blast shot by mixing it in a compressed air flow. The blasting process is performed manually. The essential protective gear for the worker is supplied with the machine itself. We are also offering automation as per customer requirement. Injector cabin with filter The injector shot blasting cabin is used for manual blasting of small & medium sized workpieces, which are inserted into the cabin through the side opening. The worker puts his hands in the working area through the oval openings on the front side of the cabin. The openings are equipped with gloves made of wear resistant rubberized material.
Complete shot blasting boxes The shot blasting box is a machine used for manual blasting of workpieces of arbitary size and shape. The blasting performance is determined by the number of pressure blasting sets connected to the machine & by the performance of the air compressor supplying the machine.
Hand-held shot blasting sets This device consists of a pressure blasting vessel & of the protective gear for the worker. The pressure vessel is attested & is equipped with a dosing device. During the blasting process, the vessel is hermetically sealed from the inside which enables the necessary air pressure to be built up. This is used to feed the shot through the feeding valve into the compressed air flow.
Pressure cabin with filter The pressure shot blasting cabin is used for blasting small and medium sized parts. Its usage is similar to injector cabin. However, the different technology enables higher blasting performance.

The range of surface swing table type machine is made in such a way that it suits to small to big foundries. These machines can be supplied in one / two doors with table. The doors combination of swing table and drum is also available. The operation of machine is simple and automatic.

Model	ASBMF-750	ASBMF-1200	ASBMF-1800	ASBMF-2440
No. of Swing Table	One	One	One	One
Diameter of Swing Table	750mm(30")	1200mm(48")	1800mm(72")	2440mm(96")
Maximum Load on Table	350kg	750kg	2500kg	4500kg
No. of Centrifugal Wheel	One	One	One	One
Size of Wheel(mm)Â (Dia x Width)	300mm X 63mm	500mm X 63mm	500mm X 63mm	500mm X 63mm
H.P. of Blast Wheel	7.5	15	25	20
Shots Flow Rate (Kg. / Hour)	6500	9000	15000	12000
Type of Dust Collector	Fabric Bag	Fabric Bag	Fabric Bag	Frabric Bag Type
Dust Collector Capacity (CFM)	1200	2000	3000	4500
Shaking Of Bags	Manual	Mechanical	Mechanical	Mechanical
Total H.P. Required	12	23	36	56
Loading Height (mm)	1125	950	950	1200
Max. Job Height (mm)	300	600	1000	1060

Tumblast Type Shot Blasting Machine is available in two size's. Recommended for blast cleaning and shot peening of small to medium size.   

PARTICULARS	SASMTF	SASMTF
	20"X27"	27"X36"
Tumbler (Basket) Size	20" x27"	27" x 36"
Size of Wheel (Diameter x Width)	300mm x 63mm	381mm x 63mm
No. of Wheels	One	One
Work Load Capacity
Volume (Cubic Feet)	2	5
Weight (Kgs)	140	350
H.P. of Blast Wheel	7.5	15
Shots Flow Rate (Kg/Hr)	6500	12000
Type of Dust Collector	Fabric Bag	Fabric Bag
Dust Collector Capacity	1200 cfm	2000 cfm
Shaking of Bags	Manual	Mechanical
Total Power Consumption	12.5 HP	24 HP
Dimension of Machine
Length	1360 mm	1600 mm
Width	1500 mm	1900 mm
Height	4050 mm	4600 mm
Dimension of Dust Collector
Length	1200 mm	1450 mm
Width	970 mm	1310 mm
Height	2460 mm	3700 mm
Floor Space required for Machine with Dust Collector
Length	2950 mm	3400 mm
Width	3100 mm	3000 mm

It emails positive displacement type of pup, hose pipe (length - 7.5 meters x 1 length), spraying nozzle assembly, electric motor with gear box and DOL starter. Operating Principle:

• The wet mix is poured into .the hopper of the machine, from where it is transferred into the positive displacement type of pump.
  
• The pump conveys material into the material hose pipe.
• At the end of hose pipe spraying nozzle is located which spray the material on the surface with the help of compressed air.
• The machine is provided with type by pass system to regulate output, pressure gauge to measure material pressure etc.

Output	500 ltrs per hour
Compressed air requirement	25 cfm at 7 kg/cm2
Eletricals	3HP,415+6V AC, 50+3% Hz, 3 phase motor

It basically contains following parts :

• Material hopper having volumetric capacity 2500 ltrs. It is mounted on load for measuring weight.
• Screw drive with 2HP variable AC drive augur controlled by PLC.

Working Principle:

•  The fine coke powder is fed into the main hopper.
•  The metered quantity of powder is transferred into the secondary hopper of the coke injection machine through screw conveyor driven by AC variable drive.
  
• The transfer of quantity is controllable.
• The PLC displays the total quantity in the hopper and the rate of transfer as well as the quantity transferred.
  
• The rate of transfer is equal to the rate of injection of coke powder into the furnace.
  
•  The coke transferred into the machine works on dry mix principle.
  
•  The coke powder is duly filled into the feed hopper from where it is transferred into the revolving rotor, from where it is blown by the compressed air stream through the hose to the hot gunning lonce / coke injection lance.
•  The lance is directed to the furnace for pouring of coke powder / spraying of refractory material. The table below mentions its specifications.

DESCRIPTION	Model S-1C-FW "
Dry compressed air required at 6 kg/sq. Cm (Cuhic meters per minute)	300 to 400 dm
Output of coke injection machine approx.	70 kg./minute
H.P. Requirement of injection machine	10
STANDARD ACCESSORIES: Cote injection hose pipe I.D. Mm (10 mm. X1 length)	50
Coke injection lance (5 mtrs. X1 length)	1No
Weighing system	With electronic weighing arrangement
Volume of coke storage hopper	2.5 M³
No. Of load cells	3
Variable A.C.Drive	2 HP

Pneumatic Guniting Machine meets the high demand in building and construction industry by providing specialised concrete spraying technique.

DESCRIPTION	D-3	D-6
Compressed Air Required at 1 Kg/cm11 (cubic metre per minute]	9	10.4
Maximum size of aggregate (mm)	10	12
Discharge (cubic metre/hour) approx.	1.5	2
Chamber capacity each (cubic metre) approx.	0.085	0.17
Operation: cont.-continuous	font.	Cont.
STANDARD ACCESSORIES GUNITING/SHOKRETF Hose pipe, I.D. Mm (15 mtrs. X one length)	31	38
Pneumatic hose pipe with end connetion I.D. Mm (15 mtrs. X one length]	12	12
Pneumatic hose pipe with end connections (5 mtrs. X one length)	12	12
TIP LINER ¦ 6 Nos ID mm	20	25
TIP LINER ¦ 6 Nos ID Mm	25	31
NOZZLE TIP: 1 No. I.D. Mm	25	31
NOZZLE TIP :l No. I.D. Mm	31	3E
Nozzle body with water regulating valve (aty. No.)	1	1
Pop-up valve ring: qty. (no.)	2	2
Perforated watei ring (no.)	3	3
Grease gun: qty. (No.)	1	1

Surfex' Rotor type shotcrete machine works on a dry mix principle. The material is filled in the feeding hopper from where it falls into the chamber of revolving rotor. The mix is then transported in continuous process to the air chamber. From there it is blown by the compressed air stream through the hose to the spraying nozzle and to the application area respectively. Driven by electric motor, water is added to dry concrete in the nozzle at end of the conveying hose pipe.

DESCRIPTION	D-6(S)
Compressed Air Required at 7 Kg/cm² (cubic metre per minute)	21.50
Maximum size of aggregate (mm)	25
Discharge (cubic metre/hour) approx.	4to5
Chamber capacity each (cubic metre) approx.	00.17
Operation: cont.=continuous	Cont.
STANDARD ACCESSORIES GUNITING/SHOTCRETE Hose pipe, I.D. Mm (15 mtrs. X one length]	63
Pneumotic hose pipe with end connection I.D. Mm (15 mtrs. X one length]	12
Pneumatic hose pipe with end connections (5 mtrs. X one length ]	12
TIP LINER: 6 Nos. I.D.mm	38
TIP LINER: 6 Nos. I.D. Mm	50
IJOfflETIP:lNo. I.D. Mm	45
NOZZLE TIP-1 No ID Mm	56
Nozzle body with water regulating volve (qty. No.)	01
Pop-up valve ring: qty. (no.)	02
Perforated water ring (no.)	03
Greose gun: qty. (no.)	01

The pneumatic grout pump we are offering has piston dia 9"/ stroke 12", with grouting grouting hose 15 mtrs. With X1" ID and grouting pressure gauge these machines are highly durable & last for long.
Its specifications:

• Compressed air required : 4cu. Mtr./minute at 7 kg/cm?
  
• Grouting output: 1600ltrs/hour.
• Grouting pressure (max.): 90 kg/cms'.

 Guniting MachineOperating Principle:
Surfex' pneumatic guniting machine we are manufacturing are meeting the high demand in construction industry by providing concrete spraying technique. We have two models to deliver two different output. The model D -3 portable, medium duty guniting machine & model D.:6 which is a heavy duty machine for production work. The machine is used for guniting of swimming pool, repair and rehabilitation of structural and Tunnel lining etc.

• 'Surfex' guniting machines continuously feed dry or damp material into the compressed air stream.
• The introduced material is carried with strong acceleration through guniting hose to guniting nozzle.
• At nozzle water is added to the mix.
• The hydrated material is pneumatically forced at very high velocity on to the surface. Its specifications are mentioned in the table below : Having piston dia 9' / stroke 12' , with grouting grouting hose 15 mtrs. X 1' ID and grouting pressure gauge.

Compressed air required	4cu.Mtr./minute at 7 kg/cm2
Grouting output	1600lts/hour
Grouting pressure(max.)	90 kg/cms2

Grout Pump consists of positive displacement type of powerful pump of suitable capacity.
Following are its technical specifications.

Technical specification of 'Surfex' bleclri		Grout Pump Machine
MODEL	G-6-500E	G-6-1000E	G-S-1500E	G-6-2000E	G-6-3000E
Maximum Output - Itrs/houf at 6 kg/cm² pressure	500	1000	1500	2000	3000
HP Required for pump	3.0	3.0	3.0	3.0	5.0
HP Required for Twin Grout Mix preperation tank	2.0	2.0	2.0	2.0	2.0
Total H.P. required	5.0	5.0	5.0	5.0	7.0
MODEL	G-l 2-500E	G-12-1000E	G-12-1500E	G-l 2-2000E	G-l2-3000E
Maximum Output- Ltrs/hour or 12 kg/cm²pressure	500	1000	1500	2000	3000
HP Required for pump	3.0	3.0	5.0	7.5	7.5
HP Required for Twin Grout Mix preparation tank	2.0	2.0	5.0	2.0	2.0
Total H.P Required	5.0	5.0	7.0	9.5	9.5

MODEL	G-24-500E	G-24-1000E
Maximum Output ¦ Ltrs/hour at 24 kq/cm³ pressure	500	1000
HP Required for pump	3.0	7.5
HP Required for Twin Grout Mix preparation tank	2.0	2.0
Total HP required	5.0	9.5