We offer reliable and energy efficient Round Bottle cooling towers used in process technology industry. In these types of cooling towers, the water is fed from the top in order to distribute effectively through full cone nozzles at low pressure drop. In our range of cooling towers, air inlet is covered with PVC mesh and plastic louvers (if required).

The raw material used to manufacture our range of cooling towers are PVC, FRP, Polypropylene and Galvanized steel.

The available range is 5 TR to 500 TR in Single Cell. The advantages of our cooling towers are:

• The Cooling Tower is easily accessible and thereby providing easy maintenance.
• These cooling towers consume less power and thus save operational cost.
• The Cooling Tower is light in weight facilitating easy installation without any special reinforcement.
• Water distribution through sprinkler system ensures best performance.

Our range of natural draft FRP cooling towers consumes no power and requires less maintenance so (100% Power Saver) These towers do not require any fan and PVC fills ensuring no spillage and low evaporation loss. Some advantageous features of our range includes:

• Suitable to high temperature upto 100 degree centigrade.
• There are no moving parts, motors, fans and gears, which provide reliability and durability.
• Variation in system pressure do not affect tower operation.
• Basin is totally leak proof due to FPR construction
• Our range is light in weight & facilitates easy installation
• Corrosion resistant
• Cost-effective
• Available range is from 20 TR to 500 TR.

Our range of Induced Drafts are available in Square Shape. These induced drafts are quieter and smaller. These facilitates low air speed at the air inlet resulting good distribution of air. The available range of our square shaped induced drafts is 5 TR to 500 TR in single cell.

Some advantageous features of our range of products are:

• These cooling towers are easily upgraded and expandable due to modular construction
• Fan-deck is part of FRP casing to make it strengthened & unbreakable
• Gravity water distribution is an additional feature that perform at low pump head that come out from rotating sprinkle system
• The Cooling Tower is light in weight facilitating easy installation

Motor
We provide a comprehensive range of motors that are constructed as per the international standards. Our range of motors are available in Special (TEFC) Low RPM Motors foot mounted type with extended long shaft in IP : 55. Having solid construction and varying capacities, these motors have weather proof construction that are supplied to suit hot and humid atmosphere.

Fan

Energy Efficient FRP Fans aerodynamically designed Aerofoil axial flow fans manufactured from high quality FRP material save up to 15% to 25% power as compared to other fans, and achieve the best performance keeping power consumption & noise levels to the minimum possible. Aerodynimic axial flow FRP fans manufactured by SUVIDHA are specially designed for high efficiency, cooling towers.

Casing

The cooling tower casing is made of FRP (Fibre Glass Reinforced Polyester).The FRP is a mat, material is light in weight, durable & non-corrosive. An additional embossing is done for extra strength in case of big cooling towers. The cooling tower casing can resist /withstand wind velocities, vibrations & are resistant to local impact.

Header & Branch Pipe

These are used for the purpose of water distribution in cooling towers.

Supporting Structure

All supporting steel structures are hot dip galvanized for extra strength & life.

Fills

Suvidha offers a wide range of edge folded fill product in honey comb design to meet your specific applications. These fills are optimally designed to achieve high surface area & offers minimum resistance to air flow providing more cooling by low power consumption. They have uniform thickness throughout. Durable folded edges provide strength at critical locations on the fills.

Eliminator

Made of FRP/ PVC, the eliminator is used to reduce water losses due to entrainment of moisture drops in the air stream.

Nozzles

The performance of cooling tower is greatly depend on the water distribution over the fills, Nozzles distribute water evenly through a wide spray angle without any derive pockets.

Sprinkler

Sprinkler is made of Aluminium alloy to avoid corrosion & fitted with a sealed ball bearings to take care of thrust & radial loads it rotates at 5 to 12 RPM by the reaction force of circulating water. this water is discharge a set of branch pipes over the entire area of fills.
Brass/SS Sprinkler can also be supplied on request of extra cost.

Our range of Forced Draft cross flow cooler is used for gas cooling at elevated temperature. These rectangular coolers are effective for cooling gases before passing them through any bag filter or dust collector where gases with high temperature are not recommended. Our range is available in a range of 25 TR to 500 TR in a single cell & above in multi-cell upto 2000 TR. The main advantages of our forced draft rectangular shape are:

• Easy maintenance
• The motor is installed at the bottom facilitating easy inspection, installation and overhauling
• Low noise
• Motor life is increased as motor is installed at bottom & hence no contact in motor & water
• FAN: Power Saver, Long Life & Adjustable Pitch
• Equipped with world class quality Fan Assembly

We offer a comprehensive range of evaporative coolers. These cooling devices are quite effective in those locations having moderate humidity. In humid conditions, these evaporative coolers provide thermal comfort benefit while increasing ventilation and air movement. Our range of evaporative coolers is cost-effective and are applicable widely in commercial and domestic purposes.

Range: 3000 CFM to 40,000 CFM with single blower.

Types:

• Single Skin/ Double Skin
• Horizontal/ Vertical
• Ceiling suspended/ Floor mounted
• Single Blower/ Twin Blower

We provide superior quality air handling units having following advantages with foreward curved / backward curved, with DIDW blower make: Nickotra, comfrei, kruger for maximum performance

• Anti-corrosive
• No condensation at corners
• Allows easy maintenance of the inner surface
• Low operation noise
• Access door for easy serviceability of fan and motor
• Range: 1200 CFM to 40,000 CFM

We manufacture and provide a wide collection of fan coil units available in different capacities. These fan coil units have various coil lengths and heights. In addition to it, we also provide customization facility to our entire range of products as per the client's specifications. These range from 400 CFM to 1200 CFM.

We manufacture superior quality cooling coils for various industrial and institutional applications. Our range of cooling coils is used for: chilled water, freon, brine, glycol, ammonia and other liquids. Our coils match various casing dimensions. These cooling coils are manufactured using good quality raw materials such as brass, copper, nickel, carbon steel etc.

Smoke & Fire Dampers

We provide a wide range of fire and smoke dampers having strong construction. These dampeners are equipped with effective mechanical or electronic controls, which ensure automatically air cut-off in the system. This results in safety, in case of fire or smoke.

Air Terminals

We furnish a wide collection of air terminals designed to provide variable air volume delivery of conditioned air. Our range is manufactured using good quality aluminium. These air terminals are available for systems that have pressure dependent, as well as, independent applications. Our Product range includes:

• Linear Horizontal Grills
• Rectangular Fixed Louvers Grills
• False Ceiling Diffusers
• Adjustable Bar Grillers
• Linear Diffusers
• Slot Diffusers

DIDW Blowers & Ceiling Suspended Air Handling Unit

Range: 2 TR to 40 TR with semi sealed Kirloskar compressor & water circulation pump.

Application:

• Chemical Process Plastic,
• Rubber Industry Lamination,
• Oil cooling
• Dairy, bread & food industry
• Anodising/ Quenching oil cooling and all type of process cooling