Swagelok Hyderabad

The Swagelok modular platform component system is a system for use within process analyzer, sample-handling, and fluid distribution systems. The Swagelok MPC system includes a complete selection of MPC series components and a complementary configuration tool called the MPC System Configurator.

Swagelok offers a selection of multijacketed tubing, jacketed tubing, insulated tubing, and pre-insulated tubing bundles, both electric- and steam-traced.

Swagelok offers a range of DOT- and TC-compliant double-ended and single-ended sample cylinders, as well as miniature sample cylinders, cylinder accessories, and outage tubes.

Swagelok offers a variety of filters, including all-welded inline (FW series), inline (F series), and tee-type (TF series), for gas and liquid service.

• Resists galling
• Resists water washout
• Is a deep blue color that is not affected by water

• Contains PTFE
• Available in 2 oz (59 cm³) tube, 1 lb (450 g) can, and 55 lb (25 kg) bucket

• Resists galling
• Is chemically nonreactive with a wide range of materials
• Is noncorrosive to metals

• Resists moisture
• Available in 1 oz (29.5 cm³) tube and 1 lb (450 g) can

Swagelok offers an assortment of weld tools and accessories that assist in ensuring high-quality, uniform orbital welds, including internal purge pressure kits, stainless steel flux, tungsten electrodes, gauges, collets and fixtures, and more.

Swagelok offers a variety of special fabrications and flow transfer panels for the biopharmaceutical and sanitary industries, along with skid-mounted systems for liquid flow applications in the sanitary industries.

• Thin film and piezoresistive sensor technology for repeatability, reliability, and stability.
• Available in flush diaphragm version for use with viscous fluids and slurries.
• Accuracy ≤0.5 % of span limit point calibration (0.25 % of span best fit straight line).
• Broad selection of pressure ranges, engineering units in psi, bar, MPa, kg/cm², and kPa. Pressure references of compound, gauge, or absolute
• Process connections

Swagelok pressure transducers provide accurate electronic pressure monitoring for industrial and ultrahigh-purity applications. They are offered in a wide range of pressure ranges, process connections, electrical connectors, and output signals to support a wide range of customer requirements.

• Metal-thin film sensing technology, which consists of a metal-thin film resistor bridge on an Elgiloy® diaphragm, enables PTU series pressure transducers to maintain reliable readings over a wide range of temperatures.
• Modular construction and configurable, renewable electronics that enable interchangeability of internal components provide flexibility, reduce inventory, and make any required maintenance quick and simple.
• All wetted components are 316L VIM-VAR stainless steel and Elgiloy to promote corrosion resistance and clean operation
• Standard transducer enclosure meets Ingress Protection IP65/NEMA4 or IP54/NEMA3.
• No span adjustment is required after zero point correction so installation of field-replaceable electronics is quick and simple.
• Low internal volume minimizes dry-down and purge time, helping reduce qualification time.

• Plastics
• Chemicals
• Aluminum
• Corrosives
• Stainless steel
• Hydraulic fluids

• Ceramic
• Refrigerants
• Synthetic rubber
• Aromatic fuels
• Carbon steel and special alloys

• Seals immediately.
• Lubricates threads, preventing costly thread damage from galling and seizing during assembly.
• Allows low breakaway torque for easy-to-break connections.
• Is compatible with a wide range of chemicals.
• Clings to threads and will not shred or tear on assembly.
• Available in 1.69 fl oz (59 cm³) tube.

• Cures to a bond that resists vibration or shock.
• Lubricates threads, preventing costly thread damage due to galling and seizing during assembly.
• Allows low breakaway torque for easy-to-break connections, even after fully cured.
• Is compatible with a wide range of chemicals.
• Applies quickly and easily.
• Clings to threads and will not shred or tear on assembly.
• Available in 6, 50, and 250 cm³ tu

• Remove and replace filter media and strainer overscreens with minimal product loss.
• Short and long models available.
• Several interchangeable parts for minimized maintenance inventory requirements.
• Filter media and strainer overscreens ordered separately.
• Floor-mount stands and wall-mount brackets available.

Features

* 40, 50, 63, 100, 115, and 160 mm (1 1/2, 2, 2 1/2, 4, 4 1/2, and 6 in.) dial sizes
* Accuracy in accordance with ASME, EN, and JIS
* Available with a variety of end connections, including Swagelok tube adapters
* Center-back, lower-back, lower mount, and panel-mount configurations
* Stainless steel and reinforced thermoplastic construction
* Available unfilled or liquid filled

• Easy disassembly for cleaning.
• Quick installation in new or existing clamp lines with same center-to-face dimensions as standard Kwik-Clamp tees and crosses.

• Connect to standard Kwik-Clamp fittings for quick disassembly—butt weld ferrule included.

• All-welded construction provides reliable fluid containment.
• Inline filters are for use where space is limited.
• Filter is easily cleaned by backflushing.
• Sintered element is available in 0.5 µm nominal pore size
• Pleated mesh elements are available in 2, 7, and 15 µm nominal pore sizes.

Inline filters are for use where space is limited.

• Designed for on-line process analyzers.
• Easy element replacement.
• Horizontal mounting reduces panel space requirements.
• Drain connection port located on body eliminates need to disconnect line when changing elements.
• Stainless steel construction enhances system cleanliness.
• Captured bowl nut can be assembled hand-tight or wrench-tight.
• Bowl-to-body O-ring seal is available in fluorocarbon FKM, PTFE, and Kalrez® for a broad range of chemical compatibility.
• Perforated sleeve
• provides rigid support for filter element
• allows unobstructed fluid flow.
• Element-to-bowl seal .
• centers element
• prevents bypass flow
• minimizes element deformation

The Swagelok SCF series UHP gas filter is designed to meet the stringent requirements of SEMI E49.8-96. With the proprietary Membralox® ceramic element and 316L VAR stainless steel housing, the SCF series UHP filter is a solution for many demanding gas filtering applications.

High-pressure fittings are designed for pressures up to 60 000 psig (4134 bar), with both tube and pipe connections available.

The Swagelok medium-pressure tube fitting offers a leak-tight gas seal and vibration resistance in applications up to 15 000 psig (1034 bar).

Swagelok stainless steel, brass, carbon steel pipe fittings are available in 1/16 to 1 in.sizes for a variety of applications. Swagelok also offers gaugeable alloy 400/R-405 mechanically attached pipe fittings that are ASTM F1387-qualified for shipboard use.

Swagelok offers weld fittings, in a variety of materials, sizes, and shapes to suit any industrial or high-purity application.

• Ultrahigh-purity, specially cleaned, and industrial
• SAF 2507™ super duplex
• Vacuum service
• Stainless steel tubular fittings

The Swagelok HF series high-flow, manual gas pressure regulator features a load spring which interacts with a unique pressure-sensing assembly to precisely control outlet pressure. Outlet pressure is adjusted by turning the handle.

Swagelok offers a variety of dampened-movement bimetal thermometers and thermowells for general industrial use and for the sanitary industries.

• Designed in accordance with ISO 3669.
• Available in rotatable and nonrotatable models, with either through holes or tapped holes.
• Joint consists of an OFHC (oxygen-free, high- conductivity) copper gasket compressed between two “sexless” flanges secured with stainless steel fasteners.

Swagelok sanitary centrifugal pumps are available in six models suitable for low-viscosity food, beverage, dairy, and biopharmaceutical fluids such as juices, milk, oils, syrups, clean-in-place solutions, water, and cooling media. The 3-A–compliant, clean-in-place design can be serviced without removing the pump from the system.

• Vacuum annealed, cold formed tubular fittings minimize likelihood of stress corrosion cracking.
• Tolerances, angularity, squareness, ovality, and polish finishes monitored with statistical quality control.
• 316L materials heat traceable on request.
• Marked with heat number(s) and internal surface finish.
• Documented with material test reports.

Swagelok­­ BPE series fittings are offered in up to 6 in. sizes in a variety of configurations and can be ordered with inspection by an independent, third-party service to verify compliance with ASME-BPE requirements. Swagelok TS series biopharm fittings feature controlled gasket compression to prevent gasket extrusion and fluid holdup.

Swagelok ball valves are available in variety of standard materials and end connections. In addition, Swagelok offers ball valves manufactured or configured to the special needs of your applications, including valves with ECE R110-type approval and valves with ISO 5211-compliant actuation.

Swagelok offers an assortment of weld heads for use with the M200 power supply that enable reliable, consistent orbital welding of tube and pipe from 1/16 in. to 4 in. and 2 to 114.3 mm outside diameter.

Swagelok variable area flowmeters measure the flow rate of liquids and gases by means of a tapered tube and float. The float is pushed up by increasing fluid flow and pulled down by gravity as fluid flow decreases.

qc series instrumentation quick-connects are used in sampling systems and test and calibration equipment requiring frequent connection, minimal air inclusion, and minimal spillage.

Swagelok offers a wide range of hose and flexible tubing products for a variety of fluid handling system needs.

Hoses are available factory assembled or as individual components—bulk hose and end connections—ready for field assembly. Core materials include stainless steel, PTFE, PFA, nylon, polyethelene, and Buna N rubber. A complete range of industrial and sanitary end connections is available.

Flexible tubing is available in stainless steel, PFA, and vinyl. Select types are available as factory assemblies.

• Models can be selected to sense either increasing flow or decreasing flow.
• Snap-action float provides positive actuation.
• All-welded construction ensures fluid containment.
• High-strength, permanent magnet and 316L SS materials enhance durability.
• Replaceable switch assembly outside flow path eases maintenance.

Swagelok sanitary positive displacement pumps are available in 14 models suitable for thin to viscous liquids, including solids in suspension. The 3-A–compliant, clean-in-place design can be serviced without removing the pump from the system.

Swagelok offers a range of shapes and sizes, including straight fittings, elbows, and tees for use with 1/8 to 1 in. tubing.

QM series miniature quick-connects offer fast and easy connections.

Swagelok bleed valves can be used on instrumentation devices such as multivalve manifolds or gauge valves to vent signal line pressure to atmosphere before removal of an instrument or to assist in calibration of control devices. Swagelok purge valves are manual bleed, vent, or drain valves. The knurled cap is permanently assembled to the valve body for safety.

• Unique design allows easy installation where space is limited.
• No axial clearance is required.
• Sealing is accomplished with a captive O-ring in the body component.
• Assemblies can be used from high pressure to critical vacuum, within a wide range of temperatures.
• O-ring contained completely for maximum efficiency.
• Test ports at two locations for easy leak testing.
• Female nut threads silver plated for easy assembly.
• Smooth finish on gland face ensures positive seal.

A patented case hardening process and patented recessed and contoured geometry provide unique engineering to the Swagelok back ferrule. The hinging-colleting back ferrule design expands on the already robust performance of the traditional ferrule design and provides:

* excellent gas-tight sealing and tube-gripping action
* easily achieved proper installation
* consistent remakes
* excellent vibration fatigue resistance and tube support
* full compatibility with original Swagelok stainless steel tube fittings of identical sizes.

Swagelok offers sample cylinders, cylinder valves, and rupture disc units that are compliant with the Transportable Pressure Equipment Directive (TPED).

• Filter element can be replaced without removing body from system.
• Replaceable sintered elements are available in 0.5, 2, 7, 15, 60, and 90 µm nominal pore sizes
• Replaceable strainer elements are available in 40, 140, 230, and 440 µm nominal pore sizes.

• Nontoxic, noncorrosive, nonflammable
• Available in 2 oz (59 mL), 8 oz (236 mL), and 1 gal (3.8 L) bottles

Pressure-reducing regulators control outlet pressure by balancing an adjustable spring force against the forces caused by inlet and outlet pressures. The spring force is adjusted by turning the stem/handle, which sets the desired outlet pressure.

Swagelok tube adapters can help eliminate difficult alignment problems and can be used with any Swagelok tube fitting. For example, when installing a gauge with a pipe fitting end connection, it is often difficult to align the dial to the desired position without damaging the gauge. However, gauges with integral Swagelok tube adapters eliminate alignment problems.

Swagelok heat exchanger tube plugs seal the ends of leaking tubes, providing longer use of the heat exchanger. The uniform taper and the smooth surface finish assure positive sealing with a minimum installation force.