The Tiger Needle Valves are manufactured from forged material available in various shapes and compact design for process and instrument line in high pressure and temperature.

• Design: Straight, Angle, Cross, Union Bonnet & line mounting.
• Size Range: 1/8" to 1"
• End Connection: NPT/BSP/SW/BW/ODT
• Material: SS316/SS304/CS/Brass/Monel also available wit  Nace MR-01.75 Standard
• Pressure Rating: 500 psig to 10,000 psig.

FEATURES:

• Forged or Bar stock body construction.
• Straight or Angle pattern with panel Mountinga optional.
• Integral bonnet with one-piece body is available with straight and angle patterns.
• Back seating provide anti-blow out of stem.
• Variety of stem, rotating type, non-rotating type tip. and stellite filled tip.

The Tiger Manifold Valves are special purpose Valves. Which offer a safe and economical method of installation to control and measure pressure of liquids and gaseous media. They are ruggedly manufactured and precision machined to the most exacting dimensional tolerance to ensure perfect installation and application.

Manifolds are functionally installed to control measure, isolate, equalize, calibrate, drain, vent or differentiate the pressure of liquids and grases. Manifold series offer optional 2, 3 & 5 Valves configurations. Which come in remote mounting (pipe to pipe), direct mounting (pipe to flange) on to the instrument center (54 mm).

• Design: Two way, Three way & five way Manifold straight & T Type
• End Connection: NPT / Flange
• Material: SS316/ SS304/CS/Monel
• Pressure Rating: 6000 psig

FEATURES:

• One piece forged body without welds for high and full safety.
• Safety bonnet lock prevents accidental disassembly.
• Accessories for manifolds like Flange, Bold, '0' ring etc. also available.
  

The Tiger Ball Valves have very compact design. Only a quarter turn operation is required to close the valve from fully open condition and vice-versa. The inside ball moves on the Teflon Seals, at the adaptor face and stem faces contact with the Teflon rings. there is no torque in the operation of Valve for long time.

• Design: one piece and three piece
• Type: Two way, Three way, Four way & Line mounting
• Size Range: 1/4" to 2" NB in Screwed end, 1/2" to 4" NB in flanged end
• End Connection: NPT / BSP/ SW/BW and Flanged as per BS -10, ASA and DIN Standards.
• Material: SS316/ SS 304 / CS / Brass with SS working parts
• Pressure Rating: 300 psig to 5000 psig.

FEATURES:

• Panel mountings are available as an option.
• Internally loaded stem with shoulder to prevent stem blowout.
• Low operating torque.
• Floating ball desing ensures leak proof shut-off at hight pressure.
• Maximum orifice to minimize the pressure drop.
• Rugged body construction and floating ball is machined from base stock.
• Handle with arrow indicates flow indicates flow direction allows quick operation and low torque with 1/4 turn.
• Encapsulating ball seats are uniformly forced to form tight seals against ball and body cavity and virtually allow no dead volume. Interal ball-stem is machined form one single piece and best suited to encapsulating ball seals.

We offer wide spectrum of industrial valves that are used in a variety of applications including industrial, military, commercial, residential, and transportation. Our valves are appreciated in the market for low operating torque and high tensile strength. We manufacture valves in different sizes to meet the requirements of clients.

The Tiger Pipe Fittings for instrumentation are available in many shapes and sizes and are manufactured in accordance with international standards like ANSI B 16. 11. B 16. 9. B 16.5 etc.

Pipe are manufactured from forged and other shape of material confirming to ASTM STANDARDS. Condensate pot and Air Headers are available upon customer's request.

• Design: 2000#,3000#,6000#,9000#
• Size Range: 1/8" to 1"NB
• End Connection: NPT/ BSP / SW/ BW
• Material: SS 316/ SS304/ CS/ Monel/ Brass / with Also NACE
• Pressure Rating: 300 psig to 6000 psig.

The Tiger twin & single ferrule fittings consist of various precision engineering parts designed to provide secure positive leak free seal after assembly and reassembly. Ferrules swage on out surface of tube assuring leak proof joint.Only one and quarter turn are required from hand assembled to make safe connection.

• Design: Double Ferrule Type
• Size Range: 1/8" Tube OD to 1"tube OD
• End Connection: ODT / NPT/ BSP / SW/ BW
• Material: SS 316 / SS 304 /CS/ Monel / Brass / NACE
• Pressure Rating: 100kg /cm2 to 400 kg /cm2.

FEATURES:

• Fitings are designed to withstand high-pressure service and severe operation Conditions.
• They make safe joint, Which hold tight beyond the bursting strength of the Tubing itself.
• They meet the severe requirements of the industry performance tests on pressure, vibration, impulse, repeated assembly etc.
• Fittings are very easy to assemble because they require no threading, flaring, welding, soldering, only open wrench is nedded.