Power Control Systems

Our clients can avail from us a wide range of Battery Chargers, which is used in electrical engineering works and battery manufacturing processes. Designed using SMPS & PWM technology, these chargers deliver consistent performance. Our range of chargers is available in different specifications that fit the diverse requirements of the clients. Some of the highlighting features of our range of Battery Chargers are:

 

• Constant current limit.
• Available in 12 V to 144 V
• Boost & trickle voltage
• Wide input voltage range 160V - 275 volts

 

Applications:

• Xerox
• A/C
• Medical Equipment
• Domestic Appliances
• Water Pumps

 

We are instrumental in offering a wide range of Servo Control Voltage Stabilizer, which is used in provide constant voltage even under conditions of unbalanced voltage. These stabilizers are widely used in large retail stores, regional offices and small data centers. We also offer these stabilizers in different specifications. Our clients can avail these stabilizers from us at industry leading prices.

The salient features of our range of Servo Control Voltage Stabilizers are:

 

• Micro Controller Controlled
• Mains On Delay
• Adjustable Output Voltage and Sensitive

Some other details of our range of Servo Control Voltage Stabilizers are:

Our clients can avail from us a wide range of Online UPS, which is used to provide emergency power back up in case of power failure. These UPS are easy to install and have low maintenance cost. Our range of UPS finds application in offices, schools, commercial and corporate establishments. These UPS come with sealed acid maintenance free battery. We also offer these UPS at cost effective rates.

 

Some of the highlighting features of our range of Online UPS are

 

• Micro controller controller
• Triple conversion
• Galvanic isolated output
• Rugged design

 

Specifications:

• 1 KVA to 10 KVA Single Phase
• 15 KVA to 50 KVA Three Phase

We are instrumental in offering Sine Wave UPS With AVR that are capable of bearing heavy electric loads. These UPS are widely used in corporate and commercial establishments for emergency power supply. Our range of inverters is easy to charge and delivers consistent performance. These UPS are available in varied specifications, which fit the diverse requirements of the clients.

 

Some of the specific features of our range of Sine Wave UPS With AVR are:

 

• Built in spike suppressor

• Micro controller controlled

• Line interactive technology

• Built in 3 Stage AVR

• AVR range - 165 V to 275 V - 650 VA to 4 KVA

Technical Specification

We are instrumental in offering a wide range of Sine Wave UPS, which is ideal for photo copy machines, medical equipment, water pumps, air conditioners and domestic appliances. These UPS are easy to operate and provide emergency power supply in case of power failure. Moreover, our UPS are widely used in offices, shops and other commercial establishments.

Specifications:

• Pure Sine Wave with DSP (Less than 3% THD)
• Regulated Output ( + 2% )
• Capacity: 2000 VA to 20 KVA Single Phase

Our clients can avail from us a wide range of Home UPS, which comes with micro controlled controller for maximum protection and reliable operation. These UPS are designed specially for Indian voltage conditions such as low voltage and voltage fluctuations. We offer these UPS from 450 VA to 1300 VA. Furthermore, filter outputs are provided for low noise in fans and tubes.

Some of the highlighting features of our range of Home UPS are:

• CVCC PWM changer for smooth charging of batteries
• High efficiency by use of MOSFETs
• Pure sine wave output
• Wide input voltage range (150v -280v)
• Mosfet design filtered output
• Controlled by microprocessor high efficiency
• Main on delay intelligent protection system
• SMPS charger feather touch switch

Application :

• Shops
• Hospitals
• Laboratories
• Offices
• Banks
• Classes
• Show rooms
• Hotels
• Industries

Features:

• Line Interactive Technology
• Built In Automatic Voltage Regulator
• Feather Touch Switches
• Cold Start Capability
• Two Potential Cvcc Charger
• Smps Charger
• Single Board Design
  

SALIENT FEATURES:

• Advanced high frequency SMPS based charger with 85% typical efficiency
• Automatic selection of no. of batteries
• Suitable for charging Battery Capacities 18AHTO200AH
• Continuously Adjustable Potentiometer for current selection as per Battery Capacity Wide range of AC input (160V - 275 VAC)
• Protection Provided for Output Reverse Polarity & Output Short Circuit
• Digital Panel metering
• Low ripple current sourced to batteries
• Compact and Light Weight

INPUT SPECIFICATIONS:

• Nominal Voltage: 230V AC, 50Hz
• Voltage Range: 160-275V AC
• Frequency: 47-53 Hz

OUTPUT SPECIFICATIONS:
Nominal Voltage of Battery: Auto Selectable from 6VDC to 72VDC Output Voltage: Uncontrolled, 3V per cell, Manually Terminated at end of charge (Sp. Gravity Test).

Output Current:

Adjustablefrom 0.6Amp to

1. 10 Amp (12V and 24 V Battery)
2. 9 Amp (36V and 48 V Batteries)
3. 8 Amp (60V and 72 V Batteries)

Ripple + Noise:
<100mV at Resistive Load. Short Circuit Protection: Electronic Trip Provided with Auto Recovery Reverse Battery Protection: via MCB trip Cooling: Controlled Fan (Forced Cooled


VISUAL INDICATIONS

LED's Provided For:

• Battery Voltage Range - Red
• Charger On - Amber
• Fault- Red (open Circuit/Short Circuit)
• Digital Meter For Current, Voltage.

SALIENT FEATURES:-
 • Self Powered
 • Operates without disconnection of batteries with inverter/   UPS
• Compact and Light Weight - Portable
 • Resistive Constant Current, time based discharge.
 • The result of battery test is available in few seconds

The HRD family equipment is designed for high rate discharge testing of automotive and commercial 12 volt batteries. Using Swastik exclusive HRD Tester, the operator can perform a short test on each battery to find defects such as poor / open welds, sulphated batteries. Setting available with discharge currents of 15, 30, 45 and 60 amps. Unit is air cooled with a fixed resistor and load switching.


IT IS ASSUMED THATTHE BATTERY UNDERTEST IS FULLY CHARGED


INPUT SPECIFICATIONS:-
Nominal Voltage: 12VDC
AH Range (manual select):
1. 20 - 200 AH in four steps

OUTPUT SPECIFICATIONS:-

Nominal Voltage: 12VDC
Discharge Current in steps of 15A:
1.15A(20-50AH)
2. 30A(51-100AH>
3. 45A (101-150 AH)
4. 60A (151-200 AH)

VISUAL INDICATIONS:-

LED's Provided For:
BATTERY AH RANGE in 4 - steps as above manually selectable - RED, SET AH: RED Flashing during selection
START DISCHARGE / TEST - RED, Flashing during ready (on selection of AH value)

RESULT:-
1  HEALTHY- Green led (Battery votts above 11.6VDC at the end of test)
2. GOOD - Amber led (Battery volts above 10.8VDC at the end of test)
3. WEAK - Red led (Battery volts below 10.8VDC at the end of test)

FAULT:-
1. OVER VOLTAGE: Red led, when more than one batteries are connected in series
2. UNDER VOLTAGE: Red led, When the battery voltage is less than 10 VDC before test.

THE METER DOES NOT CARRY OUT THE TEST IF FAULT LED GLOWS

METERING:- Digital Meter For measurement of Battery Voltage.
Weight:-1.2Kg

Dimensions:-
250 (H) X 140(W) X 50(D)mm

Enclosure:-

IP-20, CRC Sheet, Powder coated.

Input & output Connection:-

0.5 meter Cable Pair with large crocodile clamps.
Operating Temperature 0"C to 50°C
Storage Temperature -10 C to +70 C
Cooling Convection, Natural.
Humidity < 95% RH

• Enhancement to the above specificationsand Customizing can be considered on request.
• Specifications may or can be altered without notice as per company's continuous improvement Program