Centrifugal blowers move air by means of the centrifugal force generated by rotating a cylindrical impeller. Used for applications where increased air pressure, increased static pressure, high airflow is required. Centrifugal blowers have a small outlet, which concentrates air in a single direction, and are therefore suitable for local cooling.
centrifugal blowers provide concentrated airflow in a single direction suitable for local cooling / heating.
these are capacitor-start capacitor-run, squirrel cage single phase and three phase motors. The rpm available are 1440 / 2880 / 720 and with gearbox rpm can be very low. Depending upon requirement for the connection, motors have lead wires or terminal box.
suitable for continuous operation these motor rotate in clockwise or anti clockwise direction.
frame sizes from 65 mm to 90 mm
output power from 1/60 hp (12 w) to 1/4 hp (180 w)
these are capacitor-start capacitor-run, squirrel cage single phase and three phase motors. The rpm available are 1440 / 2880 / 720 and with gearbox rpm can be very low. Depending upon requirement for the connection, motors have lead wires or terminal box. The outward appearance is the same as that of induction motors.
suitable for short duty operation where the motor should have minimum overrun.
frame sizes from 65 mm to 90 mm
output power from 1/60 hp (12 w) to 1/4 hp (180 w)
it is centrifugal sealless pump, the impeller is driven with a magnetic coupling. Construction material is gf- pp, ceramic shaft, ptfe bushes which makes it corrosion resistant pump. The pump offers a low current draw, low heat rise and has a quiet operation.
suitable for corrosive, hazardous & toxic chemicals, foods & beverages, medical applications.
These are Electro Magnetic Fail Safe ( Power off Activated) Brake fitted Capacitor-start Capacitor-run, squirrel cage single phase and three phase motors. The RPM available are 1440 / 2880 / 720 and with gearbox RPM can be very low. Depending upon requirement for the connection, motors have Lead wires or terminal box. The outward appearance is the same as that of induction motors except the extra length.
Suitable for continuous operation with frequent start stop, minimum overrun and load holding.
Frame sizes from 65 mm to 90 mm
Output power from 1/60 HP (12 W) to 1/4 HP (180 W)
These brakes use a single plate friction surface to engage the input and output members of the brake. They are the most common type of electromechanical brakes. Torque is independent of slip speed. It is also directly proportional to coil current, making response time extremely quick. When current/voltage is removed from the brake, the disk is free to turn, and no relative force is transmitted between either member; therefore the only torque seen between the input and the output is bearing drag.
Electromagnetic Clutches transfer the torque via electromagnetic flux, hence torque is smooth throughout its operating rpm range. Torque is independent of slip speed. It is also directly proportional to coil current, the response time extremely quick. Wear & tear involved in the normal operation of the unit is minimal giving extremely long life.
Sona Foods India Deals in supplying and manufacturing centrifugal blowers, centrifugal blowers for mpeller industrial centrifugal blowers, precise centrifugal blowers and fabricated centrifugal blowers.
Lamachinotech Supplier and manufacturer of blower systems, customized blower systems, industrial blower systems, electric blowers and blower and also deals in other products such as tension controller and forced convection oven.
Processing...
