Indiamart
logo
Syal And Co 7
YR
7th Year of Membership
Ludhiana, Punjab

Products

We are leading Supplier & Manufacturer for the Products which also includes Carbon Rings for Submersible Water Pump & Eot Crane Spares And Dsl Bus Bar since 2008

Carbon Rings For Submersible Water Pump

Carbon Rings for Submersible Water Pump

SYAL & CO manufacture Carbon rings with superior self lubricating properties and low wear. These are used in submersible pumps for lifting water from deep water bored wells. Pump parts in carbon material with higher hardness will enhance abrasion resistance.

Carbon rubbing components are widely used in high temperature applications where the presence of liquid lubricants is unaccepatance. Chemical inertness, temperature resistance, lightweight, dimensional stability, impermeability to gases and liquids. and self-lubricating properties make mechanical grades suitable for some of the most demanding applications. These rings are mould to size or machined to close tolerances


Carbon Rings for Submersible Water Pump

Applications
Submersible Water Pump


Material Used
Carbon resin impregnated (sinthered process)
Carbon metal impregnated (sinthered process)
Indigenous cabon (press to mould)

Eot Crane Spares And Dsl Bus Bar

Eot Crane Spares And Dsl Bus Bar

SYAL & CO engaged in the manufacture, export as well as keeping stock of the following range of E.O.T CRANE SPARES equipments:
EOT Crane Spares & DSL Bus Bar

Cable Trolleys Current Collectors
Master Controllers Starting Resistors
Cable Trolleys Counter Weight Limit
Dynamic Breaking Resistance Switches Electro Hydraulic Thrusters Brakes
Lever Limit Switches Flexible Geared Couplings
Electro Hydraulic Thrusters Automatic Rotor Starter Panel
Flexible Brakes Drum coupling SSl Punched Grid Resistance Boxes
SS Wire Grid Resistance Boxes Radio Remote Control
Fechral Punched Grid Resistance Boxes Cable Reeling Drums
Shrouded Bus Bard Conductors

Graphite Asbestos Parts Vanes

Graphite Asbestos Parts Vanes

Graphite asbestos parts are lubricating material especially used in Textile Industries, The Asbestos Graphite Slide Rails ;offered by us are used to avoid contamination from lubricating agents.

We utilize Famatex, Monfort and T,T. Stenter machines to manufacture our range. Our range is best known for self Ilubricating, durability, long life, strong, good flexibility and high resistance against heat. The Graphite Asbestos Parts 'offered by us helps in the smooth functions of the machines without much load over the electrical motors. These also help in increasing the life of stenter clips. We also offer lock pins to our clients, which are manufactured using quality spring steel 'sheets.

Graphite Asbestos Parts Vanes





Applications


Famatex stenter, Monfort stenter, T. T. Stenter, RucknerTextile Industry.

Graphite Synthetic Sliding Parts

Graphite Synthetic Sliding Parts

We offer different type of graphite synthetic sliding part & graphite synthetic sliding bushes use in different stenter ma-chine clips. Some of the range includes -

Sliding Part for Babcock M/C
Sliding Part for Sanitex M/C
Sliding Part for Textima M/C
Synthetic Bushes for Babcock & Manforts M/C

Carbon Brush

Carbon Brush

SYAL & CO is manufacturing wide range of carbon brushes for motors. We have adopted different measures for monitoring quality in all our manufacturing processes and activities. We manufacture these carbon brushes as per the needs of the customer. Our range of spare parts comprises of electric carbon brush and brush holders. These electric carbon brush manufactured by us are fabricated from the batches of carbon blocks having uniform properties within narrow tolerance limit.

Carbon Brush

produces world class Carbon Brushes. Selecting the correct grade carbon brush is important for Commutator & Slipring performance, maximum brush life, and high motor performance. Syal & Co manufactures and designs many patterns, grades and types of carbon brushes ensuring the correct carbon brush is available to meet your requirements for you motors or generators, and advice on Carbon Brush grade selection is given by our technical experts. The benefits to our customers include Carbon Brushes that can increase uptime and reduce maintenance costs by improving machine reliability and availability. The correct brush grade is the key to meeting the unique operating requirements of such diverse applications as Mining, Battery Electric Vehicles, Aerospace, Power Generation, Traction and Industrial Motors
The primary function of a carbon brushes is to deliver or collect current from a rotating part of an electric Machine. The brushes should maintain a close contact with rotating part. (i.e. Commutator or slipring) / in order to ensure sparkles operation without wearing itself too quickly. There are various types of Carbon \ Brushes in different types of Grades.

Electro Graphite (EG)
Metal Graphite (MG)
Carbon Graphite (CG)
Natural Graphite (NG)
Hard Carbon (HC)
Resin Bonded (RB)
Silver Graphite (SG)

Applications
DC / AC Motors, Slip Rings Motors, Power Generators, Welding Generators, Crane Installation....
Some Typical applications include OEMs, Railways, Automotives, Steel Mills, Paper Mills, Power Stations, Cement Plants, Sugar Plants, Domestic Home Appliances, and Power Tools etc.
Material Used
Indian Grade
Imported Grade

Mechanical Seals

Mechanical Seals

Mechanical Shaft Seals are being manufacturedby us for multiple applications where zero leakage is essential. Seals are available in designs capable of sealing corrsive, volatileor abrasive fluids under a wide range of speeds, pressures &tempratures, especially at critical applications & meeting following specifications -
Mechanical Seals

Longer Life & minimum, maintenance
Perfect Sealing
Precision Lapped Surfaces
Made to International Standards
Replacement against any make of Shaft Seals
v/s Carbon, high Alumina Ceramic, PTEE plain or filled etc.



Applications

Mechanical Shaft Seals are being manufacturedby us for multiple applications where zero leakage is essential. Seals are available in designs capable of sealing corrsive, volatileor abrasive fluids under a wide range of speeds, pressures &tempratures, especially at critical applications & meeting following specifications -

Constant Action Springs For Brush Holder

Constant Action Springs for Brush Holder

WE offer replacement spring assemblies for virtually every type of constant force brush holder, including turbine ring magazines. Our spring assemblies are designed to meet or exceed the performance of the original part. We also replace springs on existing back plates. Over 40 popular style are carried in stock
Exclusive Built-In Wear Indicator

An optional wear device is available with selected springs to easily detect when carbon brush should be replaced.
Brush Spacing
Spring Repair
Did you know that we can replace the springs on your existing clips? Just send in the old clips and we can put on new rollers/springs. Make sure you include an old brush or part number. The brush size, style, and RPM determine the spring force.

Ferro Alloys

Ferro Alloys

INDIA CARBON supplies OF various foundry raw materials like Ferro Alloys, Metals, Calcined Bauxite, Silica Ramming mass & Refractory castables which are required for induction furnaces in various foundries.. The company is known for being a reliable source & technical services for supply of various foundry raw materials. We are totally committed to meeting customer expectationsin material performance,customer service, technical support & product consistency. Our commitment to technical
Ferro Alloys

development, innovative cost effective solutions & strong customer service reflects our aim to be the leading supplier of foundry raw materials in the industry.With offices and warehouses at Ludhiana & Mandi Gobindgarh in the heart of the Iron & Steel belt of India, ensures timely sourcing, distribution and delivery of goods. Rearing to grow has expanded its reach across the length and breadth of India
Silica Ramming Mass
Steel Shots
Ferro Silicon Magnesium
FERRO SILCION
FERRO MAGNESE
Silico Manganese
FERRO CROME

Ferro Alloys
Metals
Carburiser
Refractory Castables Inoculant (Barium Base)
Calcined Bauxite
Inoculant (Strontium Base)
Inoculant (Zirconium + Barium Base) GRAPHITE GRANULES
Calcined Petroleum Coke
BENTONITE
BENZA COAL
COCONUT CHARCOAL
CARBON STICK
Inoculant (Zirconium Base)

Rotary Joint

Rotary Joint

SYAL & CO Is manufacturing Rotary Joint which is self lubricating. Rotary joint is a self-supporting rotary Joint used to admit steam or fluids in to textile machines, Drying Ranges, calenders, Sizing Machines-paper Machines and other Machines with rotating heating of cooling cylinders, rolls of drums. It is suited for th highter pressure and operating speeds. Carbon guide and seal rings are provided of high quality material. Suitable siphon elbow can be furnished with the joints.




Applications

Textile Industries, Rubber Industries, Plastic Industries, Packing Industries, Steel Plant

Refractory Coatings

Refractory Coatings

  • Zircon-Based Coatings
  • Zircon/Graphitte Based Coatings
  • Alumino Silicate Coatings
  • Steel Coatings
  • Graphite Based Coatings

Rocker Arm Assembler

Rocker Arm Assembler

We are specialist in manufacturing of rocker Arm Assemblies for all type D.C. motors and Moulded Insulators for any load
and applications.
Rocker Arm Assembler

Applications

Molded in D.M.C. Material
Molded in epoxy material
Fabricated in fiber glass
High insulation

Graphite Slide Rails

Graphite Slide Rails

Every where temperatures are occur and oil free slide ways are required. Graphite Carbons finds employment as a lubri-cating material especially in Textile Industries are Asbestos graphite carbon slide rails used in ordered to avoid contamina¬tion from the normally used lubricating agents.

We have developed graphite carbon slide rails for FAMATEX, MONFORTS, BRUCKNER, KRANTZ STENTER MACHINES for which we have received the technical know-how from abroad. It has properties like Self-lubricating Durability, Long life. Strong enough with a good flexibility and highly heat resis¬tance. In result of these, Stenter Machines will run smoothly without much load over the Electrical, Motors and also it will increase the life of Stenter Clips.

Graphite Slide Rails




Applications


Textile Industry

Slip Rings

Slip Rings

SYAL & CO is manufacturing Slip Rings of new generation with the assurance of excellent quality and performance. The slipring manufactured by us are molded and screwed version for domestic application to a Giant Traction Motors of AC/DC locos, diesel locos and industrial motor. A slip ring is an electrical connector designed to carry current or signals from a stationary wire into a rotating device.
Slip Rings

Typically, it is comprised of a stationary graphite or metal contact (brush) which rubs on the outside diameter of a rotating metal ring. As the metal ring turns, the electrical current or signal is conducted through the stationary brush to the metal ring making the connection. Additional ring/brush assemblies are stacked along with rotating axis if more than one electrical circuit is needed. When the search comes to Slip ring Unit, we are the leaders of market for manufacturing high quality Slip ring Unit
Advantages

Low torque minimize system torque budget
Tight packaging to fit in the most demanding space
Smooth running
Low electrical noise
Quick shipment per your urgent requirement
High bandwidth transfer capability

Steam Joint Rings

Steam Joint Rings

Steam Joint rings offered by us are used in rotary pressure
joints. these seal rings effect flow of hot liquid of steam from a stationary supply pipe to a rotating machine part. Machines like rubber mixing, roller mills, calendaring machines and cylinders are used in paper and textile industries as well as in plastics, chemicals and other industries for similar application.

Steam Joint Rings

Material Used
Carbon resin impregnated (sinthered process)
Carbon metal impregnated (sinthered process)
Deva metal cabon (press mould)
Indigenous carbon (press mould)

Terminal Bar

Terminal Bar

We are manufacturing different spare parts for STARTERS, O.C.B's, SWITHGEARS etc.
Features:
Terminal Bar High class insulation.

  • Availablity big range.
  • Available for motors, generators, panels.
  • Moulded in D.M.C. / EPOXY.
  • Can withstand at high voltage.

Dsl Bus Bar

Dsl Bus Bar

SYAL & CO HAVE RANGE OF Dsl Bus bar sytems which is used for Power Trans-mission. Current Capacity ranges from 60amps to 1000amps rated at 100% duty cycle & nominal voltage upto 660V. They fulfill the requirements of latest international standards. All are safe to touch & designed finger proof. Conductor rail provide a safe & economical supply of electrical power for track guided mobile machinery

Carbon Brush Holders

Carbon Brush Holders

SYAL & Co is manufacturing both the brush and brush holder. We can design both components to work collectively to provide you with the best performance, savings and brush life possible with excellent turnaround time. All Brush holders are made of the finest brass quality, solid or extruded, with constant force spring assemblies. Specialized options include: height adjustability, brush-wear indicator devices, quick disconnecting terminals and low friction coatings.
Carbon Brush Holder & Constant Springs

The carbon brush holder is very important to the life and op-erating efficiency of the brush and also to the parent machine. The quality of the brush performance is always dependent on the design and ability of the Brush Holder which supports It against the commutator or slip ring.
Our research department, with its experience of more than 30 years in the field, has developed best quality materials for manufacturing brush holders suitable for their particular applications. We use the highest grade materials in the production of carbon brush holders, such as brass sheet extrusions, sand castings, brass investment castings etc. which are proven to show the best possible heat dissipation and much resistance Co mechanical strain. The Brush Holders can be supplied with surface treatment against corrosion, to enhance their performance and life span.

We can manufacture & supply any type of Carbon Brush Holder as per your drawing / sample / specification within a short time. We offer our quality Brush Holders in various materials such as Brass, Gun Metal, Phosphor Bronze, Sheet Metal etc. as suggested by the customers. We carry a stock for Standard Brush Holder of different pocket sizes. We can also manufacture very small quantity of Brush Holders as per your requirement

Spring Pressure (Psi)

Spring Pressure (Psi)

Measured Force (LBS) Brush Thickness X Brush Width

Ocb, Vcb, Acb Spare Parts

Ocb, Vcb, Acb Spare Parts

We have full range of 0.C.B., A.C.B., V.C.B. Spare Parts for all makes as follow

Resin Cast CT & PT Spout and Trolley Bushings Male and Female Contacts ARC Chutes

Carbon Vanes

Carbon Vanes

SYAL & CO is manufacturing CARBON Vanes, housing parts and rotors made of Carbon and Graphite materials are suitable components for dry running rotary compressors and vacuum pumps. These materials are used for high volume production of complete vane pumps. Due to their high mechanical strength, Vanes can withstand very high peripheral speeds.
Carbon Vanes


Applications
Printing machines, packing machines, Pumps delivering fresh air, Silo vehicles, Automobile door central locking pumps, Automobile central pneumatic system, Medical equipments, Gas analysis pumps, Brake Servo, Pneumatic tensioning devices.

Rotary Union

Rotary Union

SYAL & CO is manufacturing Rotary Union for the use in water & other applications.
This product is primarily used in the rubber, plastic, printing & Steel industries
FEATURES: The housing made with G.M / Brass, the rest of metalic components are made with S.S. Optional (2" & above sizes): The housing made with G.M. + SS composite.
The elastomers are made with VITON, NITRILE, PTFE, HYPALON, SILICON as per required.
These unions are suitable for many applications to different microlapped sealing assemblies are available.
MODEL A:- Standard sealing with carbon graphite to tungsten carbide seal for filtered liquid, thermic fluid and steam.
MODEL B:-Tungsten Carbode or SIC/ SIC seals for applications with hard water or abasive fluids.




Applications

For Water, Steam & Thermic Fluid for High Speed Machine.

Commutator

Commutator

SYAL & CO is a leading Indian manufacturer and exporter of Moulded Commutator, Traction Commutator, Industrial Solid Riser, Industrial Flexible Riser, Manufacturing and Mining, Traction Motors for Transit Application, Pulp and Paper. We are manufacturing moulded commutators from 50mm diameter up to 250mm diameter for general industrial use. We make high quality commutators for the Traction industry like railway and metro systems. They are all new or rebuilt on the original steels. We have Dynamic seasoning and over
Commutator
speed facility up to 3000 rpm to guarantee a stable commutator. With our extensive experience in reverse engineering, we can build virtually any type that you may require.
New and rebuilt commutators are made to sample or redesigned to fit the original dimensions from 50mm diameter to 2500mm diameter. All different shape flexible risers are manufactured from IL' shaped type to standard fork type from 100mm diameter to 2500 diameter.


Applications
Mining, Traction Motors and Transit Application, Pulp And Paper & many other applications.

RELATED COMPANIES

Indiamart

Terms of Use - Privacy Policy - Link to Us

Copyright © 1996-2014 IndiaMART InterMESH Ltd. All rights reserved.