Process Control Equipments

Our company offer production target display, which is fully programmable (micro- controller based).

Following are the specifications of our production target display:

• Input : pulses for actual production display from any source
• Target display : Settable through keypad / Timer Based
• Difference display / Efficiency display
• Display sizes : 4digit/5digt/6digit (seven segment LED display with various sizes : ½ ,1,2 or 4inch)
• Supply voltage : 230 VAC /110V AC /24 VDC
• PC Communication optional
• Life long Memory Backup

We offer liquid level controller, which provide heavy duty performance and are designed accurately. These liquid level controllers are generally used for various industrial and commercial purposes to check the level of liquid. Our range of liquid level controllers are used in multistoried residential complexes, housing societies & commercial complexes, hotels etc as well as bore wells pump houses. Some of the features are:

• Pump Protection
• Specially designed sensors
• Fully Automatic Operation
• Automatic switching of lights
• Saves electricity.
• Saves water.
• Time Control
• 4-20mA retransmission for SCADA / DCS
• no. of levels selectable

We offer signal isolator, which have the following features:

• Input
  • 0/4 -20mA / 0/2-10VDC
  • 0-30V AC VOLTAGE
  • 0-1/2/5/10A AC
  • Resistance
  • RTD
  • Thermocouple
  • shunt (mV)
• Output
  • 4-20mA DC / 0-20mA DC
  • 0-10V DC /2-10V DC
• Number of inputs : single /dual /quad
• Number of outputs : single /dual /quad
• Isolation provided on three ports (1000 vdc)
• Mounting : din rail / 19”rack mounting
• Supply voltage : 230 VAC /110V AC /24 VDC

We offer flow integrator totalizer, which are fully programmable (micro-controller based) with PC communication. Some of the features of our flow integrator totalizer are:

• Input :
  • 0/4 -20mA Or 0/2-10Vdc
  • Pulse Input 0-10KHz
• Display Sizes :Seven Segment Led Display
• 4/5 Digit For Flow Rate
• 6 /8 Digit Display For Totalized Flow
• RS485 communication
• Isoated Retransmission Output : 0/4-20mA
• Linear / Square Root Option Provided
• Transmitter Supply : 24V DC @60mA Provided With Short Circuit Protection
• Alarms : 2 Potential Free Relay Contacts
• Batching Facility : Provided
• Size : 96X96Mm
• Depth : 110Mm
• Supply Voltage : 230 VAC /110V Ac /24 VDC

We offer temperature scanners for multiple uses in various industrial applications.Our digital temperature scanners are superior in performance and are provided with a variety of features to ensure ease of handling use. These temperature scanner are used to display temperature of more than one point in a process and scan the temperature of each point and displays it. Based on microprocessor controller technology, some of the features of our temperature scanners are:

• Based on microprocessor based technology.
• Option can be given to select either a common display with separate channel / zone .
• Indication control action can be provided as programmed.
• Printer Interface can be provided as required.
• Temperature setting can be done.
• The entire unit is housed in a suitable DIN standard cabinet.
• 2 Digit display on the left hand side shows channel number selected either during scanning or programming.
• Scan time is settable between 0.1 sec/channel & 99 sec/channel.
• Default setting is 1 sec.

We offer logic controller, which provide numerous solutions to various industries. Our range of logic controller are of the following features:

• Digital Input : 1 to 16 Nos.
• Relay output : 1 to 16 Nos.
• Predefined logic as per customers requirement
• Sizes : din rail mounting / Panel mounting
• Supply voltage : 230 VAC /110V AC /24 VDC
• LCD display 16 x2 characters
• RS232 communication port

Description :

Syscal series of Calibrators provide features & functionality which is not found in other Calibration equipment. Designed for use in today’s demanding process industries, the CAL-001 is ideal for use in the field or the laboratory. The CAL-001 is more than a calibrator, it is also a high precision field diagnostic tool for troubleshooting your most difficult process applications.

Technical Specifications :

Modes of Operation : Source & Sink

Signals for operations:

RTD ( Pt 100, Pt 200, CU 53 ) TC ( J, K, R, S, T, B, E types ) mV ( -200 to +200 mV for sink mode & -100 to +100 mV for source mode ) mA (0 to 24 mA ) V ( 0 to 10 V )

Common mode rejection : >120 dB at AC operation Normal mode rejection : >60 dB at 50 or 60 Hz Temperature Stability : ± 0.01% peroC Storage temperature range : -10 to 60oC Input-Output isolation : 500 V AC/DC Measurement sampling time : 250 ms Display : LCD, 16 x 2 display with backlit Accuracy : ± 0.05% overall for all parameters Linearity : 0.05% Response Time : <100 msec Functionality : Auto / Manual mode, Stepwise increment / decrement, min-max step for calibration Power Supply : External AC Supply ( universal 90 to 270 V AC ) OR Internal rechargeable Ni-cd Battery ( 12 V, 1.2 Ah ) with charger ( Operational time with Battery 6 hrs. & recharging time 12 hrs. upto 90% ) Load : 600 Ohm for 0 to 24 mA, 4.7 Kohm & above for 0 to 10 V DC Transmitter Supply : 24 V DC, 30 mA Case : Injection molded ABS with internal metal RFI coating Dimension : 290 (L) x 200 (W) x 110 (H) in mm ( DIN std. ) Weight : Net 4 kg & with charger 4.5 kg Mounting : Table top Mounting Accessories : Resin carrying case, Banana Cables, Mains Chord Operating Conditions : Temperature 0 to 55oC / Humidity 5 to 95% non condensing