Automatic Panels

We are a well known company engaged in designing and manufacturing of AMF (Auto Mains Failure) Panels that are applicable for managing DG sets. Our panels come with in-built safety features for protecting the Engine & Alternator. The range of our AMF panels are manufactured upto 1250 KVA and are fabricated from 16 SWG thickness, high grade CRCA sheet steel. The use of quality material has made our panels dust &vermin proof. Powder coated for longer life and meticulously wired. Features General

• A power circuit consisting of contactor, MCB and fuses.
• Automatic start/stop of the genset in case of AC mains failure and its restoration respectively.
• Manual start/stop facility also provided.

Logic

• Mains Failure: 3-attempt engine cranking after mains failure otherwise the engine fails to start. Engine starts-up within 10 sec of mains failure otherwise 2 more start pulses after every 10-15 seconds.
• Unhealthy Mains: Any of the phase failure or voltage drops below set value.
• Mains Restoration: Engine keeps running for 30 seconds before stopping, as recommended by the Engine manufacturer.

Metering

• One Ammeter with CTs & selector switch, one frequency meter, one voltmeter with selector switch and one hour meter.

Set of indications

• Load on DG
• Load on mains
• Fault indications
• LLOP
• High water temp/high cylinder head temp
• Overload

Set of Push Buttons

• Engine start/stop
• Alarm acknowledge button for hooter
• Reset button for fault indication

Safety

• High water temperature
• LLOP
• Overload trip

Battery Charger: A separate battery charger for continuous charging of batteries in trickle/boost mode to ensure prompt starting of the engine.

Application: It is installed at the induction load areas where the power factor comes down. Generally installed at Factories, Big Offices, etc. Models & Amps/ Kva Rates: Upto 800 Kvar Features

• World advanced Microcontroller Technology is used
• Auto/Manual selector is available
• Kvar by Kvar selectable system
• Stage on LED indications are available
• Stage to stage capacitor boosting & reconnection intervals; 20 secs delay
• Panel mountable, serviceable
• Fully enclosed wall mountable
• Working temperature up to 55 degree celcius
• Cable entry: Bottom (top optional)
• Incoming control and total protection of panel with 3pole/ MCCB
• Soft relay operation of capacitor –boosting help for smooth power factor
• Management & avoid sound and disturbances
• Power & control wiring: by copper multi strand ISI wire
• Capacitor bank rating:440v/according to your load required KVAR
• For standard safety on Capacitor efficiency losses, Hunting etc., IEC (International Electric Code) Standards
• Higher, Healthy PF maintaining (between 0.94-0.99) brings
• Good quality & Healthy run of your induction load(Motors , Air conditioners, compressors, chokes, etc).
• It adds life to your, A/C, Tube lights, Compressors, Motor & other loads
• Off course, great escapes from the penalty from the electricity Board
• Chance of getting good incentive from the electricity Board

Our company is engaged in designing and manufacturing of automation panels that are having an excellent appearance. We have the facility to manufacture these in different shapes like one sided, double sided and desk type. These panels are made using careful wiring and are used for the below mentioned machines:

• Automatic Control Panels for Granite Cutting Machines
• Control Panels for Rubber Extruders
• Control Panels for PVC Extruders
• Automatic Control Panels for Tyre / Tube Curing Presses
• Control Panels for Gantry and EOT Cranes
• DC Drive Panels for Sugar Mills
• AC Drive Panels for Power Plant Boiler Application

The range of our power distribution panels are mainly used to distribute direct current or DC power from one supply to other devices. These type of distribution panels monitor and protect DC systems and serves as an effective power distribution system. Our power distribution panels are applicable in:

• Shorted output device
• Heater current indication
• Loop break alarms
• Heater break alarms
• Airport
• Stadiums
• Convention centuries

This scanner monitors, displays, annunciates and trips up to 8/12 temperature. It is enhanced with a micro controller that offers key board programming. Some of its features are as follows:

• Linearized indication
• Digital calibration
• Compact size
• RISC type micro controller
• Optional input pt-100 RTD/K type thermocouple
• Indicate & controls temperature of eight different temperature zone
• Two alarm with hysteresis for individual channel
• Low Alarm Set Point
• Hysteresis according to application requirement
• RS232/ RS485 communication port