Electric Products

Presenting a range of Bus Ducts and Rising Mains that are available upto 4000 A, which can be operated with less than 35 degree Celsius Temperature Rise over an Ambient of 40 degree Celsius. Their short circuit withstands capacity falls at 50kA. The non-segregated Bus Ducts with inter leaving design are aptly designed for indoor and outdoor installation with IP: 55 degree of protection. All our bus duct systems are type tested. ENTRACO is major exporter of bus duct system & its complete solution with Erection & Commissioning services. We are pioneer in Design, Engineering & Manufacturer of various types of Bus Ducts and Bus Trunking Systems like:

• Phase segregated & non segregated metal enclosed bus duct
• Super compact
• Sandwich type bus duct
• Super compact, resin cast IP 68 bus duct
• Canallies system for lighting & low power distribution ranging from 40 Amp. to 120 Amp.

Recent introduction of canalized bus duct:

• A complete bus duct & bus trunking system range is offered by ENTRACO with complete end to end design, engineering & erection services.
• Metal enclosed (CRCA / Aluminium sheet) air insulated LV bus duct 1000 V ranging from 1000 Amp. to 6000 Amp.
• HV bus duct – 11 kV / 22 kV / 33 kV – metal enclosed, segregated phase and non-segregated phase bus duct system ranging from 600 Amp. to 4000 Amp.
• Super compact, IP 68, resin cast bus duct from BKS stromschienen Ag , Switzerland as their exclusive authorised representative for india & Sub- continent region for sandwich bus duct ranging from 100 Amp. to 4000 Amp.

We offer a wide range of cable trays, including perforated and ladder type of cable trays in various width ranging from 50 mm to 1250 mm and height ranging from 15 mm to 50 mm. The height for perforated type is available upto 150 mm. Cable Tray and allied accessories are made out using various material having thickness from 1.6 mm to 6 mm. We use mild steel, stainless steel, aluminium, etc., for manufacturing our range. Our range of cable trays is manufactured in compliance to various international standards and specifications viz. NEC/NEMA. The standard finishes for mild steel trays are:

• Hot dip galvanized
• Powder coated
• Polyurethane coated
• Epoxy coated
• Self colour (black)
• Painted

Design of Cable Trays

• Cable trays design is based on limitation of deflection of cable trays L/360. It is ordinarily recommended that spacing of structures be limited to 1500 mm to provide a techno-economic design.
• The width of the cable trays are determined by the diameter of cables, that are run over the trays i.e. the clearance between heavy duty cables is equal to the diameter of cables, or cable cluster that pass over the tray. Cables used for lighting, instrumentation and other similar loads are usually bundled in a cluster, duly clamped and are run along one side of the tray.
• Height of the flange of the cable trays are designed based on the load carried by the cable trays and also the availability of space wherein the able trays are to be fixed. The rungs of the ladder type cable trays are normally spaced between 250 mm/300 mm pitch.
• The channels of ladder type cable trays are sometimes placed facing outwards. This facility increases the effective width of cable trays and also the stringer of the ladder type trays are used for fixing the lighting/instrumentation cables.

We are engaged in manufacturing of Feeder Pillars that have a specified standard of protection IP:55. These pillars are perfect for outdoor use and are widely applicable in different non-industry and industrial applications. Our specialization lies in designing the pillars as per the specific requirements of the customers. We are achieving accurate results in our production by mixing variety of resources in our manufacturing process. These feeder pillars are extensively used in:

• Hotels
• Residential Complexes
• Townships

We are engaged in manufacturing of cable ladders that include elongate spine members that can be bended into different configurations and spaced apart hangers that are attached to the elongated spine members. These cable ladders have the following salient features:

• 45 deg & 90 Deg. Horizontal Inward / Outward Bends
• 45 Deg & 90 Deg Vertical Inward / Outward Risers
• Tees
• Concentric & Eccentric LHS/RHS, Reducers / Expanders From 100 mm unto 900 mm Widths
• Crosses Pultruded
• FRP Coupler Plates With SS 304 Or SS 316 Hardware
• Horizontal & Vertical Moulded FRP Hinges For Flexible Angle Bends Covers
• Clamps For Fixing Of Cable Trays Onto Supports
• FRP Supports For Cable Trays

We are one of the prominent name in offering Compact Substations which are used for providing power by acquiring minimum space. These compact substations are manufactured in various configurations to suit available space and are suitable for use on industrial and commercial sites.

We are manufacturing, supplying and exporting a wide range of Electrical Transformers which are manufactured using high grade raw material and available in various power range.

We are instrumental in offering Incubators which ensure compliance of the entire range with the international quality standards. Offered at industry leading prices, these are available in standards shapes and sizes.