Power Control Centres

Our company is engaged in designing and manufacturing of Motor Control Centers or MCC that have the capacity to fedd larger loads. These can also be availed with multiple power stabs that help in supporting high capacity industrial motors. Our specialization lies in manufacturing these MCC's as per the specifications provided by the customers at industry leading prices. These MCC units comprise:

• Full voltage non-reversing and full voltage reversing starters
• AC variable frequency drives
• PLC I/O chassis
• Solid-state motor controllers
• Lighting panels
• Transformers
• Analog or digital metering
• Feeder circuit breakers
• Feeder fusible disconnects

Technical Specifications

• Operational Current: 32A to 1600A
• Ambient Temperature: 40.50 degree Celsius in single and double front
• Withstand Capacity: 16KA to 100 KA
• Degree of Protection: As per IS Standards
• Types of Starters Include: Automatic Star Delta, Direct On-line, Soft Starters, Varied Frequency Drives, Stator Rotor Starters and Auto Transformer Starters.

We are engaged in manufacturing of power control centers from the best raw materials. These can be availed by our customers having the following general features:

• Panels will be suitable for 415 ± 6% volt, 3 phase (4 W E) 50 HZ AC supply
• They will be installed indoors and will work efficiently up to an ambient temperature of 50°C
• All doors will be suitably labeled and marked for convenience of operation & maintenance.

Construction

• Modular design
• Free standing
• Floor mounting type using 2.0/1.6 mm CRCA sheet.

The complete structure shall be rigid, self supporting & free from twists and bends. The panels will be totally dust and vermin proof. They will have fixed or draw out type executions as many be desired. Finish The entire panel will undergo pretreatment covering decreasing, water rinsing & de-rusting/ phosphating. It will be synthetic enamel painted or powder coated as per requirements. Bus Bars & Internal Wiring Uniform cross section copper Bus Bars (current density 1.39 amps/sq mm.) supported by SMC /DMC bases will be employed through out the length of the panel. Internal wiring be carried out with 11000/650 volt grade PVC insulated stranded conductor wire. All joints will be solidly crimped using copper thimbles Earthing Bus Bars will be running all along the board. Switch Gears/ Components Along with the formal offer, the GA drawing and the bill of material will be submitted specifying the makes & capacities of all the material to be used in the panel. Standards Our Panels confirms to the standards such as, IS 4237; IS 8623; IS 375 Switch Gears/ Components Along with the formal offer, the GA drawing and the bill of material will be submitted specifying the makes & capacities of all the material to be used in the panel.

We are offering Industrial Motor Control Center for every industry. The power from the Transformer through bus ducts is fed into PCC that include the main protection devices for the whole industry like Air circuit breakers, Fuse switch units etc. Electrical Power Control Center includes the Main bus bar

Main Power Control Center is the Main Panel of every industry. The power from the Transformer through bus ducts is fed into PCC that include the main protection devices for the whole industry like Air circuit breakers, Fuse switch units etc. Electrical Power Control Center includes the Main bus bar.

We are instrumental in offering Ring Main Units which are used in industrial and commercial sites, transformer substations, distribution switchboards and ring distribution networks.