Our company is engaged in designing and manufacturing of Motor Control Centers or MCC that have the capacity to fedd larger loads. These can also be availed with multiple power stabs that help in supporting high capacity industrial motors. Our specialization lies in manufacturing these MCC's as per the specifications provided by the customers at industry leading prices. These MCC units comprise:

• Full voltage non-reversing and full voltage reversing starters
• AC variable frequency drives
• PLC I/O chassis
• Solid-state motor controllers
• Lighting panels
• Transformers
• Analog or digital metering
• Feeder circuit breakers
• Feeder fusible disconnects

Technical Specifications

• Operational Current: 32A to 1600A
• Ambient Temperature: 40.50 degree Celsius in single and double front
• Withstand Capacity: 16KA to 100 KA
• Degree of Protection: As per IS Standards
• Types of Starters Include: Automatic Star Delta, Direct On-line, Soft Starters, Varied Frequency Drives, Stator Rotor Starters and Auto Transformer Starters.

We are engaged in manufacturing of power control centers from the best raw materials. These can be availed by our customers having the following general features:

• Panels will be suitable for 415 ± 6% volt, 3 phase (4 W + E) 50 HZ AC supply
• They will be installed indoors and will work efficiently up to an ambient temperature of 50°C
• All doors will be suitably labeled and marked for convenience of operation & maintenance.

Construction

• Modular design
• Free standing
• Floor mounting type using 2.0/1.6 mm CRCA sheet.

The complete structure shall be rigid, self supporting & free from twists and bends. The panels will be totally dust and vermin proof. They will have fixed or draw out type executions as many be desired.

Finish
The entire panel will undergo pretreatment covering decreasing, water rinsing & de-rusting/ phosphating. It will be synthetic enamel painted or powder coated as per requirements.

Bus Bars & Internal Wiring
Uniform cross section copper Bus Bars (current density 1.39 amps/sq mm.) supported by SMC /DMC bases will be employed through out the length of the panel. Internal wiring be carried out with 11000/650 volt grade PVC insulated stranded conductor wire. All joints will be solidly crimped using copper thimbles Earthing Bus Bars will be running all along the board.

Switch Gears/ Components
Along with the formal offer, the GA drawing and the bill of material will be submitted specifying the makes & capacities of all the material to be used in the panel.

Standards
Our Panels confirms to the standards such as, IS 4237; IS 8623; IS 375

Switch Gears/ Components
Along with the formal offer, the GA drawing and the bill of material will be submitted specifying the makes & capacities of all the material to be used in the panel.

This scanner monitors, displays, annunciates and trips up to 8/12 temperature. It is enhanced with a micro controller that offers key board programming. Some of its features are as follows:

• Linearized indication
• Digital calibration
• Compact size
• RISC type micro controller
• Optional input pt-100 RTD/K type thermocouple
• Indicate & controls temperature of eight different temperature zone
• Two alarm with hysteresis for individual channel
• Low Alarm Set Point
• Hysteresis according to application requirement
• RS232/ RS485 communication port

We are a well known company engaged in designing and manufacturing of AMF (Auto Mains Failure) Panels that are applicable for managing DG sets. Our panels come with in-built safety features for protecting the Engine & Alternator. The range of our AMF panels are manufactured upto 1250 KVA and are fabricated from 16 SWG thickness, high grade CRCA sheet steel. The use of quality material has made our panels dust &vermin proof. Powder coated for longer life and meticulously wired.

Features

General

• A power circuit consisting of contactor, MCB and fuses.
• Automatic start/stop of the genset in case of AC mains failure and its restoration respectively.
• Manual start/stop facility also provided.

Logic

• Mains Failure: 3-attempt engine cranking after mains failure otherwise the engine fails to start. Engine starts-up within 10 sec of mains failure otherwise 2 more start pulses after every 10-15 seconds.
• Unhealthy Mains: Any of the phase failure or voltage drops below set value.
• Mains Restoration: Engine keeps running for 30 seconds before stopping, as recommended by the Engine manufacturer.

Metering

• One Ammeter with CTs & selector switch, one frequency meter, one voltmeter with selector switch and one hour meter.

Set of indications

• Load on DG
• Load on mains
• Fault indications
• LLOP
• High water temp/high cylinder head temp
• Overload

Set of Push Buttons

• Engine start/stop
• Alarm acknowledge button for hooter
• Reset button for fault indication

Safety

• High water temperature
• LLOP
• Overload trip

Battery Charger: A separate battery charger for continuous charging of batteries in trickle/boost mode to ensure prompt starting of the engine.

Our company is engaged in designing and manufacturing of automation panels that are having an excellent appearance. We have the facility to manufacture these in different shapes like one sided, double sided and desk type. These panels are made using careful wiring and are used for the below mentioned machines:

• Automatic Control Panels for Granite Cutting Machines
• Control Panels for Rubber Extruders
• Control Panels for PVC Extruders
• Automatic Control Panels for Tyre / Tube Curing Presses
• Control Panels for Gantry and EOT Cranes
• DC Drive Panels for Sugar Mills
• AC Drive Panels for Power Plant Boiler Application

The range of our power distribution panels are mainly used to distribute direct current or DC power from one supply to other devices. These type of distribution panels monitor and protect DC systems and serves as an effective power distribution system. Our power distribution panels are applicable in:

• Shorted output device
• Heater current indication
• Loop break alarms
• Heater break alarms
• Airport
• Stadiums
• Convention centuries

Application: It is installed at the induction load areas where the power factor comes down. Generally installed at Factories, Big Offices, etc.

Models & Amps/ Kva Rates: Upto 800 Kvar

Features

• World advanced Microcontroller Technology is used
• Auto/Manual selector is available
• Kvar by Kvar selectable system
• Stage on LED indications are available
• Stage to stage capacitor boosting & reconnection intervals; 20 secs delay
• Panel mountable, serviceable
• Fully enclosed wall mountable
• Working temperature up to 55 degree celcius
• Cable entry: Bottom (top optional)
• Incoming control and total protection of panel with 3pole/ MCCB
• Soft relay operation of capacitor –boosting help for smooth power factor
• Management & avoid sound and disturbances
• Power & control wiring: by copper multi strand ISI wire
• Capacitor bank rating:440v/according to your load required KVAR
• For standard safety on Capacitor efficiency losses, Hunting etc., IEC (International Electric Code) Standards
• Higher, Healthy PF maintaining (between 0.94-0.99) brings
• Good quality & Healthy run of your induction load(Motors , Air conditioners, compressors, chokes, etc).
• It adds life to your, A/C, Tube lights, Compressors, Motor & other loads
• Off course, great escapes from the penalty from the electricity Board
• Chance of getting good incentive from the electricity Board

We offer a wide range of cable trays, including perforated and ladder type of cable trays in various width ranging from 50 mm to 1250 mm and height ranging from 15 mm to 50 mm. The height for perforated type is available upto 150 mm. Cable Tray and allied accessories are made out using various material having thickness from 1.6 mm to 6 mm. We use mild steel, stainless steel, aluminium, etc., for manufacturing our range. Our range of cable trays is manufactured in compliance to various international standards and specifications viz. NEC/NEMA. The standard finishes for mild steel trays are:

• Hot dip galvanized
• Powder coated
• Polyurethane coated
• Epoxy coated
• Self colour (black)
• Painted

Design of Cable Trays

• Cable trays design is based on limitation of deflection of cable trays L/360. It is ordinarily recommended that spacing of structures be limited to 1500 mm to provide a techno-economic design.
• The width of the cable trays are determined by the diameter of cables, that are run over the trays i.e. the clearance between heavy duty cables is equal to the diameter of cables, or cable cluster that pass over the tray. Cables used for lighting, instrumentation and other similar loads are usually bundled in a cluster, duly clamped and are run along one side of the tray.
• Height of the flange of the cable trays are designed based on the load carried by the cable trays and also the availability of space wherein the able trays are to be fixed. The rungs of the ladder type cable trays are normally spaced between 250 mm/300 mm pitch.
• The channels of ladder type cable trays are sometimes placed facing outwards. This facility increases the effective width of cable trays and also the stringer of the ladder type trays are used for fixing the lighting/instrumentation cables.

We are engaged in manufacturing of cable ladders that include elongate spine members that can be bended into different configurations and spaced apart hangers that are attached to the elongated spine members. These cable ladders have the following salient features:

• 45 deg & 90 Deg. Horizontal Inward / Outward Bends
• 45 Deg & 90 Deg Vertical Inward / Outward Risers
• Tees
• Concentric & Eccentric LHS/RHS, Reducers / Expanders From 100 mm unto 900 mm Widths
• Crosses Pultruded
• FRP Coupler Plates With SS 304 Or SS 316 Hardware
• Horizontal & Vertical Moulded FRP Hinges For Flexible Angle Bends Covers
• Clamps For Fixing Of Cable Trays Onto Supports
• FRP Supports For Cable Trays

We are engaged in manufacturing of Feeder Pillars that have a specified standard of protection IP:55. These pillars are perfect for outdoor use and are widely applicable in different non-industry and industrial applications. Our specialization lies in designing the pillars as per the specific requirements of the customers. We are achieving accurate results in our production by mixing variety of resources in our manufacturing process. These feeder pillars are extensively used in:

• Hotels
• Residential Complexes
• Townships

Presenting a range of Bus Ducts and Rising Mains that are available upto 4000 A, which can be operated with less than 35 degree Celsius Temperature Rise over an Ambient of 40 degree Celsius. Their short circuit withstands capacity falls at 50kA. The non-segregated Bus Ducts with inter leaving design are aptly designed for indoor and outdoor installation with IP: 55 degree of protection. All our bus duct systems are type tested. ENTRACO is major exporter of bus duct system & its complete solution with Erection & Commissioning services.

We are pioneer in Design, Engineering & Manufacturer of various types of Bus Ducts and Bus Trunking Systems like:

• Phase segregated & non segregated metal enclosed bus duct
• Super compact
• Sandwich type bus duct
• Super compact, resin cast IP 68 bus duct
• Canallies system for lighting & low power distribution ranging from 40 Amp. to 120 Amp.

Recent introduction of canalized bus duct:

• A complete bus duct & bus trunking system range is offered by ENTRACO with complete end to end design, engineering & erection services.
• Metal enclosed (CRCA / Aluminium sheet) air insulated LV bus duct 1000 V ranging from 1000 Amp. to 6000 Amp.
• HV bus duct – 11 kV / 22 kV / 33 kV – metal enclosed, segregated phase and non-segregated phase bus duct system ranging from 600 Amp. to 4000 Amp.
• Super compact, IP 68, resin cast bus duct from BKS stromschienen Ag , Switzerland as their exclusive authorised representative for india & Sub- continent region for sandwich bus duct ranging from 100 Amp. to 4000 Amp.

Our company is engaged in designing and fabrication of telecommunication towers and shelters that are used for supporting single hour antenna and all microwave links. We specialize in customizing these as per customer's requirement.