|
Our Products
|
 | Fire Alarm Systems |
|
|
|
Fire alarm systems are expected to help protect people, property, and assets. But you can’t tell if they’re fully operational just by looking at them. As with any other system, electronics and other components can degrade over time and compromise the system’s operation. Dust, dirt, and other contaminants can cause problems with smoke detectors. Such things as vandalism, remodeling, and improper maintenance procedures can also damage fire protection equipment. The good news is that with proper testing, inspection, and maintenance you can keep your fire alarm system at optimum operating performance. In addition to ensuring protection, keeping your system in good condition reduces expenses by preventing unbudgeted emergency repairs and costly false alarms
|
|
| | Securico Fire Alarm Systems 10 Zones10 ZONE FIRE ALARM PANEL Model No.: SEC -F10 10 ZONE FIRE ALARM PANEL Model No.: SEC -F10
SEC-F10 Securico Fire Alarm Systems 10 Zones India, SEC-F10 Securico Fire Alarm Systems 10 Zones Gujarat, SEC-F10 Securico Fire Alarm Systems 10 Zones Surat, SEC-F10 Securico Fire Alarm Systems 10 Zones Baroda, SEC-F10 Securico Fire Alarm Systems 10 Zones Ahmedabad, SEC-F10 Securico Fire Alarm Systems 10 Zones Rajkot, SEC-F10 Securico Fire Alarm Systems 10 Zones Delhi, SEC-F10 Securico Fire Alarm Systems 10 Zones Mumbai, SEC-F10 Securico Fire Alarm Systems 10 Zones Calcutta, SEC-F10 Securico Fire Alarm Systems 10 Zones Chennai, SEC-F10 Securico Fire Alarm Systems 10 Zones Pune, SEC-F10 Securico Fire Alarm Systems 10 Zones Nashik, SEC-F10 Securico Fire Alarm Systems 10 Zones Vapi, SEC-F10 Securico Fire Alarm Systems 10 Zones, SEC-F10 Securico Fire Alarm Systems 10 Zones Haryana, SEC-F10 Securico Fire Alarm Systems 10 Zones Nepal, SEC-F10 Securico Fire Alarm Systems 10 Zones India Brand : Securico Description :- Supports 2 wire international standard smoke detectors. Facility to attach speech dialer Cabinet closed with a lock and key to restrict the access Common tamper led for open or short in any zone Panel can be programmed by a user code with user programmable 3-7 digit code Panel can be armed or disarmed through code or a dedicated key Any zone can be omitted Manual call points can be operated even when some detectors have been removed 12 event fire memory log with non-volatile memory Sounders start automatically when fire is detected and can be programmed from 2 to 20 minutes Single dedicated key to arm the panel and disarm the panel Single dedicated key to manually start sounders and switch off the sounders Single dedicated key for zone led test and for drill exercise Two sounder outputs, each can switch 1 amp Higher power sounders can be attached through an inbuilt relay Battery space provided within the panel with plug in connectors Other Information - Pay Mode Terms: L/C (Letter of Credit), D/A (Documents Against Acceptance), D/P (Documents Against Payment), Western Union, Other
- F. O. B. Price Order: 800 USD
- Minimum Order Quantity: 10
- Port of Dispatch: Surat
- Production Capacity: 100 Nos PM
- Delivery Time: 1-2 Week
| | | |
Fire Alarm SystemsTech Finder 4 Zone Fire Alarm Systems An automatic fire alarm system is intended to detect the superfluous presence of fire by monitoring environmental changes connected with burning generally; a fire alarm system is either confidential as automatic, manually activated, or both. Automatic fire alarm systems can be used to inform people to vacate in the event of a fire or other emergency, to bid emergency forces aid, and to practice the configuration and associated systems to control the increase of fire and smoke. The 4 Zone Fire Alarm Control Panel is micro Controller based Fire Alarm System. It is designed via proceed technology & it is simple to activate and set up All the Zones are 24 hour moment zones indicating Fire, Open & Short, separate and common (Siren) Fault category separately on entity LED. There are take apart Sounder outputs for personality zones as well as common output with 4.7K EOL.The 4 Zone Fire Alarm Control Panel is micro Controller based Fire Alarm System. - Two wire installation merely one circuit per zone to connect detectors and sounders.
- Installation savings as high as 40% - keep on cable, installation time and sounders.
- Call point identification - panel can distinguish between call point or detector .alarms
- Built-in end of line device - The entire devices including detectors, call points and stand-alone sounders have a selectable built-in finish of line monitoring function. No resistors or additional circuits required.
- No support diode requirement.
- Multipoint detector gives 7 modes of detection.
- System fully complies with BS and EN.
- 32 devices per zone.
- Easy to install - no need to worry about marking "in's" and "outs".
- 72 hour standby.
- Assisting sounder circuit.
- Output module for plant switching, door release, etc.
- Code managed.
Tech Finder 4 Zone Fire Alarm Systems
Providing a wide-ranging of sensing machines for use on DC monitored, automatic fire detection systems, and this series of smoke and sensing devices has been designed to offer easy installation and maintenance with complete detector inter changeability. Particular importance has been given to the overall series devise, so as to minimize the occurrence of false alarms from electrical or other sources of interfering. The heat detectors are designed and each detector can be attached to a mounting pedestal (available separately) which is appropriate for two wire circuits using surface or concealed wiring methods. The detector is fitted to the base by an easy plug-in and twirls locking action. The design of the stand unit makes sure easiness of installation with easily available terminals. Four slotted fixing holes are provided to permit fixing at centres of 50mm and 60mm apt for conduit boxes. The holes also facilitate the detector to be positioned in order that the LED indicator (illuminated when the detector is triggered) is evident from a doorway, etc. | | 
| | |
| | 4 Zone Fire Alarm SystemsTECHFinder 4 Zone Fire Alarm Systems An automatic fire alarm system is intended to detect the superfluous presence of fire by monitoring environmental changes connected with burning generally; a fire alarm system is either confidential as automatic, manually activated, or both. Automatic fire alarm systems can be used to inform people to vacate in the event of a fire or other emergency, to bid emergency forces aid, and to practice the configuration and associated systems to control the increase of fire and smoke. The 4 Zone Fire Alarm Control Panel is micro Controller based Fire Alarm System. It is designed via proceed technology & it is simple to activate and set up All the Zones are 24 hour moment zones indicating Fire, Open & Short, separate and common (Siren) Fault category separately on entity LED. There are take apart Sounder outputs for personality zones as well as common output with 4.7K EOL.The 4 Zone Fire Alarm Control Panel is micro Controller based Fire Alarm System. - Two wire installation merely one circuit per zone to connect detectors and sounders.
- Installation savings as high as 40% - keep on cable, installation time and sounders.
- Call point identification - panel can distinguish between call point or detector .alarms
- Built-in end of line device - The entire devices including detectors, call points and stand-alone sounders have a selectable built-in finish of line monitoring function. No resistors or additional circuits required.
- No support diode requirement.
- Multipoint detector gives 7 modes of detection.
- System fully complies with BS and EN.
- 32 devices per zone.
- Easy to install - no need to worry about marking "in's" and "outs".
- 72 hour standby.
- Assisting sounder circuit.
- Output module for plant switching, door release, etc.
- Code managed.
TECH Finder 4 Zone Fire Alarm Systems India Dealer, Distributors, Suppliers, Importers, Exporters, Manufacturers, Stockist, Wholesaller in India
Providing a wide-ranging of sensing machines for use on DC monitored, automatic fire detection systems, and this series of smoke and sensing devices has been designed to offer easy installation and maintenance with complete detector inter changeability. Particular importance has been given to the overall series devise, so as to minimize the occurrence of false alarms from electrical or other sources of interfering. The heat detectors are designed and each detector can be attached to a mounting pedestal (available separately) which is appropriate for two wire circuits using surface or concealed wiring methods. The detector is fitted to the base by an easy plug-in and twirls locking action. The design of the stand unit makes sure easiness of installation with easily available terminals. Four slotted fixing holes are provided to permit fixing at centres of 50mm and 60mm apt for conduit boxes. The holes also facilitate the detector to be positioned in order that the LED indicator (illuminated when the detector is triggered) is evident from a doorway, etc. | | | |
|
