SurfaPore ThermoDry^® is a Nanotechnology and Microtechnology additive for making any acrylic water based paint thermal insulating and water repelling.

SurfaPore ThermoDry^® "blocks" the thermal transfer and makes paints water repelling, protecting against mosture. It reduces water condensation, resisting mould growth on walls. Thermal energy "travels" through walls and other surfaces. Therefore, large amounts of energy are required for cooling in the summer and heating in the winter. SurfaPore ThermoDry does not only reflect themal radiation, but resists heat transfer!


General Characteristics& Applications:

• Nanotechnology and Microtechnology Additive for making any water based acrylic paint water repelling and thermal insulating
• Helps in conserving energy
• Applicable on internal or external walls
• Protects against mould growth
• Extends paint life
• Increases paint volume by 60%

Certification & Testing
Independent European certification agancies certify that the use of SurfaPore ThermoDry in common water-based acrylic paints reduces their thermal conductivity by 4 times (0,1292 W/(mK), EN 12667).

Surfapore c is a water-based formulation: just apply it on existing surfaces or mix with your base materials instead of water. Create an invisible water repellent that shields against moisture, surface cracking, freeze threat & mould!


Surfapore c nanoparticles have been specially engineered to deeply penetrate and shield the microscopic pores of surfaces. While water and moisture are actively repelled, materials retain their ability to “breathe”. Surfapore c makes your surfaces moisture-free and therefore hinders mould or mildew growth and eliminates freeze threat.


Application Area & Characteristics:

• nanotechnology for cement, stucco, grout, natural or artificial stones.
• prevents humidity surface corrosion and crackings, extending the lifetime of your favourite surfaces.
• prevents growth of algae, mould and microorganisms.
• prevents white spots and salt deposits (efflorescence).
• can be applied easily on surfaces, but also can be mixed with cement-based powders, instead of water.
• assures surface “breathing” without change on colours, appearance, texture or essence.

Application Notes:


Surface application: the application surface should be dry and clean. Apply surfapore c by using a brush, a roller or spraying. No dilution is required. On very absorptive surfaces reapply within 3 hours. Mixing: replace 1/3 of water used in your mix with surfapore c. Mix well. In any case (surface application or mixing) test results on a small area before full scale application. Maximum water repellence is achieved 24 hours post application.


Consumption Rate: 8-10 square meters per litre of surfapore® c.
packaging: pe containers 1l, 4l, 30l, ibc 1000l.

Surfashield c is a liquid formulation, developed and produced by nanophos sa, that provides effective self cleaning and self sterilizing properties on a wide range of porous building surfaces.


Surfashield coated surfaces efficiently decompose organic stains, bacteria, mould, gaseous pollutants, even odours. Surfashield c modified surfaces are safer, without the use of hazardous disinfectants or antibiotics, and are preserved as new.


How does it work?

Surfashield c acts by absorbing surrounding light and transforming it in chemical power. As a semiconducting catalyst, surfashield c nanoparticles are activated by light to produce shortliving oxidizing compounds: oxygen and hydroxyl radicals. Bacteria, viruses, mold, gaseous pollutants, odors, stains; they all decompose and break down to harmless inorganic compounds. Thus the application surfaces remain actively clean. Surfashield is not just an active surface shield: as light interacts with nanoparticles, surfaces become super-hydrophilic and as a result pollutants are washed away. Surfashield also acts as an air purifier as it decomposes harmful organic substances such as volatile organic compounds (voc), car exhaust gases and nitrogen oxides (nox). As a result nanotechnology assures permanently a cleaner and safer environment just by absorbing light.
 

Application area & characteristics:

• treated surfaces become self cleaning and self sterilizing
• active self-cleaning nanotechnology for the protection of porous surfaces
• prevents mould growth on walls or cement
• inhibits black spotting from microorganisms
• decontaminates gaseous environmental pollutants
• can be applied easily on surfaces.

Application Notes:


Surface Application: The application surface should be dry and clean. Apply surfashield c by using a brush, roller or by spraying. No dilution is required. Avoid excess of application: if droplets or excess remains on the application surface, remove by using a wet cloth. On very absorptive surfaces re-apply within 24h. For maximum protection of very porous surfaces apply surfapore c 24h prior to surfashield c application to reduce water penetration.


Consumption Rate: 8-10 square meters per litre strongly dependant on the properties of the surface applied.


Packaging: pe containers 1l, 4l, 30l, ibc 1000l.

Desalin c is a special cleaner, based on a concentrated, natural acid. It is an effective formulation for residues removal from cement surfaces, mortar, grout, stucco, natural or artificial stones. Ideal formulation for the removal of salty stains, created due to efflorescence. Mould and mildew can also be successfully removed. Suitable for food production or water treatment installations, as no post cleaning, cleaner residues remain on surface (thorough water rinsing required). Readily biodegradable formulation, without organic surfactants.



Application Area & Characteristics:

• effective formulation for cleaning cement stucco, stones, roof tiles, roof tops & clay based surfaces
• removes mould, algae and “greening”
• removes salt deposits and white spots
• quick and effective action
• applicable in food safety areas and rooms (requires extensive water rinsing)

Application Notes:


Rinse the stained surface with desalin c without diluting or up to 1:5 dilution ratio for slightly stained surfaces. Wait for desalin c to act on the surface for 2-3 minutes. Remove residues by scrubbing with a hard sponge (do not use metallic sponges). After removal, wash with plenty of water. Attention! The use of protective clothing (gloves and resistant clothing) is required due to the acidic character of the formulation. Do not apply on metallic surfaces. Test the formulation on a minor non-visible surface to determine its chemical resistance and prevent potential damages. Do not mix with chlorines, bleach and sodium hypochlorite formulations.


Consumption Rate: 6-8 square meters per kg of desalin® c.
packaging: pe containers 1kg, 4kg, 30kg, barrel 200kg & ibc 1000kg.

Surfamix c is a water-based, latex-free admixture for cementitious mortars, grouts, renders and plasters that enhances adhesion and bonding on application surfaces. Further, it improves elasticity and reduces cracking, shrinkage and the formation of water absorbing capillaries.


Surfamix c is an ideal admixture for exterior or interior masonry coatings, patch, repair and re-profiling mortars, mortar grout and as an enhancing agent for adhesive materials used when laying ceramic tiles and stones. It reduces surface dusting on floor screeds/overlays an can be used as a primer to improve the adhesion of surfaces. Surfamix c improves workability and extends the working time of the mix. Furthermore, it reduces water absorption by up to 70%.


In any cementitious mix, the addition of water is essential for setting, curing and the development of mechanical strength. Water promotes a process called hydration. During hydration, individual cement particles react with each other and create a strong and durable solid phase. Most frequently, the hydration process is inefficient, resulting in extensive cracking, failure or poor adhesion of the cured cement. The active ingredients of surfamix c control the hydration process and prevent the shrinkage and subsequent failure of the final product. Simultaneously, an extended network of material fills the void volume of the cement and promotes surface adhesion and bonding. This also reduces surface dusting. The final surfamix c modified material remains visually unchanged, even though its elasticity and mechanical properties are enhanced. Individual nanoparticles exhibiting water repelling properties coat the pores of the mix and its reduce water absorption. This process results in renders, plasters or cement surfaces that are very resilient to weathering. For example, it prevents unwanted moisture,that may rise through the structure (i. E. Rising damp) or penetrate from the outside (i. E. Condensation). Finally, the cured cementitious mix is more durable against surface corrosion, negative water pressure, frost threat and extreme weather conditions. As a result, surfamix c modified cement surfaces last longer.
 

Application Area & Characteristics:

• Enhances (doubles) adhesion of cementitious mortars, grouts, renders and plasters on applications surfaces
• Improves elasticity and reduces cracking, shrinkage and the formation of water absorbing capillaries
• Nanotechnology enhances water resistance
• Extends working time.
• Latex (sbr) free and uv/weather resistant (does not become yellowish).

Application Notes:


Mixing: Add surfamix c directly in the cementitious mix, at a ratio of 5-10% by weight of the cement used. Alternatively, add 2,5 - 5 kg of surfamix c for every 50 kg of cement. Adding surfamix c can reduce or eliminate the use of other binding agents (e. G. Lime) in the mix. Surface application: when placing a cementitious mix on top of an existing surface, enhance adhesion by applying surfamix c, using a roller or a brush. The application surface should be dry and clean. Surfamix c can be diluted by up to 1:5 with water (1 part surfamix c and 4 parts of water).


For improved water repellency use surfapore c on dry cement based surfaces.


Packaging: pe containers 1l, 4l, 10l, 30l, ibc 1000l.

UrfaPore R protects your clay surfaces from water penetration. Ceramics and roof tiles are effectively protected from deterioration and from the unsightly “greening” of mould growth.


SurfaPore R preserves the aesthetics of your clay surfaces while protecting them against water and ageing. Due to their unique nature, SurfaPore R was designed to exactly “fit” the structural and surface properties of clay based materials.


After applying SurfaPore R, your clay surfaces repel water and can remain dry even after rain! Protect your roof tops and favourite clay based surfaces from “greening” and getting mouldy!


Application Area & Characteristics:

Nanotechnology for any clay-based surface, like roof tiles, pottery and cotto tiles.

Prevents surface corrosion and the “nasty greening” of your favourite surfaces.

Prevents growth of algae, mould and microorganisms.

Prevents white spots and salt deposits (efflorescence).

Simple surface application, retaining “breathing” without change of natural appearance.

Protects from frost threat.

Application Notes:

Surface Application: The application surface should be dry and clean. Apply SurfaPore R by using a brush, a roller or spraying. No dilution is required. On very absorptive surfaces re-apply within 3 hours. Dipping: Dip the clay based surface in SurfaPore R for 30 seconds. In any case (surface application or mixing) test results on a small area before full scale application. Maximum water repellence is achieved 24 hours post application.

Consumption Rate: 9-11 square meters per litre of SurfaPore^® R.
Packaging: PE Containers 1L, 4L, 30L, IBC 1000L.

 

Staining of porcelain tiles, marble and granite can be disastrous for these valuable surfaces. Create an impermeable and invisible shield by blocking even the finest pores of these surfaces.

Microscopic analysis of marbles, granite and porcelain tiles surfaces reveals multiple interconnected pores that readily collect stains. Subsequently, these surfaces lose their shine and become discoloured.

Cleaning them requires significant effort and some stains are impossible to remove. SurfaPore T can be easily applied on your existing or new surfaces and preserve their appearance.
Application Area & Characteristics:

Nanotechnology for marbles, granites, staining ceramic or porcelain tiles and other “staining” non-absorbing surfaces.

Effectively seals pores that readily absorb stains, without creating film.

Deep surface penetration and effectiveness.

Abrasion resistant activity, as modification takes place inside pores and not on the surface.

Does not change the natural appearance or turn yellowish.

Application Notes:
The application surface should be dry and clean. Apply SurfaPore T by using a brush, a roller or spraying. No dilution is required.  After 15 minutes and before SurfaPore T dries completely, remove any excess and polish, by using a wet cloth. On sensitive surfaces, reapply within 3 hours. Test results on a small area before full scale application. Maximum effectiveness is achieved 24 hours after application.

Consumption Rate: 14-20 square meters per litre of SurfaPore^® T.
Packaging: PE Containers 1L, 4L, 30L, IBC 1000L.

SurfaPore W was developed based on the unique properties of wooden surfaces. A combination of active ingredients repels water without changing the natural appearance of wood. It can be applied as a primer before the application of varnish or any other coating.

SurfaPore W provides excellent dimensional stability even in the most humid environment. It actively repels water, blocking the decay of your favourite wooden surfaces. Very versatile and easy to apply, it does not contain insecticides or preservatives but the active dehydration of the core of the wood makes it resistant to deterioration.
Application Area & Characteristics:

Nanotechnology for absorptive wooden surfaces, with a simple application pattern.

Repelling water while retaining natural look.

Prevents cracking & warping.

Varnishes can be applied on top.

Application Notes:
The application surface should be dry and clean. Apply SurfaPore W by using a brush, a roller or spraying. No dilution is required. Dipping: Dip the wooden surface in SurfaPore W for 30 seconds. Remove any application excess. In any case (surface application or dipping) test results on a small area before full scale application. Maximum water repellence is achieved 24 hours after application. Recommended application temperature is above 5oC.

Consumption Rate: 6-8 square meters per litre of SurfaPore^® W.
Packaging: PE Containers 1L, 4L, 30L, IBC 1000L.

DeSalin K is a special cleaning formulation for fast and effective action. It is ideal for the removal of stains created by the use of “sticky” paint resins, cement residues and adhesive building material. Stucco, mortar, grout and plastic components can be removed efficiently. Alternatively, mortar and grout surfaces can be cleaned and restored. For minor stain loads, DeSalin K can be diluted with tap water.
Application Area & Characteristics:

Ideal for removing grout residue after laying floor tiles.

Removes rust from stones and cement surfaces.

Quick and effective action.

Can be diluted with water, for lightly soiled surfaces.

Should not be applied on sensitive surfaces, such as marbles.

Application Notes:
Rinse the stained surface with DeSalin Κ without diluting or up to 1:5 dilution ration for slightly stained surfaces. Wait for DeSalin K to act on the surface for about a minute. Remove residues by scrubbing with a hard sponge (do not use metallic sponges). After removal, wash with plenty of water. Attention The use of protective clothing (gloves and resistant clothing) is required due to the acidic character of the formulation. Do not apply on metallic surfaces. Test the formulation on a minor non-visible surface to determine its chemical resistance and prevent potential damages. Do not mix with chlorines, bleach and sodium hypochlorite

Consumption Rate: 6-8 square meters per kg of DeSalin^® K.
Packaging: PE Containers 1Kg, 4Kg, 30Kg, Barrel 200Kg & IBC 1000Kg.
Materials Safety Data Sheet: Click here. (DeSalin K MSDS En)

DeSalin T is an extremely active cleaner, specially formulated to be applied on polished, sensitive surfaces like marble or granite. Based on alkaline formulation, your favourite surfaces will not lose their shine, colour, texture or essence, no matter the duration of application. Ideal for persistent, deeply absorbed stains like coffee, wine, oil, tomato or other organic based materials. Acid Free Formulation.
Application Area & Characteristics:

Effective formulation, without acidic additives, designed for marbles, granites and sensitive polished stones.

Does not change the “shiny”, polished appearance.

Removes the “yellowish” essence of old surfaces, by removing persistent, deeply absorbed stains (like wine or coffee).

Easily applicable.

Application Notes:
Apply DeSalin T on the stained surface, by rinsing it. Protect by stepping on it and let it act, for as long as it takes for the stain to disappear. If the liquid evaporates or for extremely persistent stains, reapply by adding DeSalin T. Alternatively, cover the application surface with a cotton piece. Attention! Always wear protective clothing and gloves. Avoid contact with skin and eyes. Do not apply on metal surfaces. Do not mix with strong acids, bases, or chlorine based liquids (sodium hypochlorite). Remove any heating devices or objects. Consumption Rate: 6-8 square meters per kg of DeSalin^® T.

Packaging: PE Containers 1Kg.
Materials Safety Data Sheet: Click here. (DeSalin T MSDS En.pdf)