Technocraft Industries India Limited

Our Auto Seal System can perform all of the below functions automatically, thus reducing manpower requirements significantly. More importantly, when hazardous materials are being packaged, utilizing our Auto Seal System eliminates the dangers to personnel who would normally be in close proximity to the packaging operation.

Our Auto-Seal Closure System can be customized to perform automatically any or all of the following functions:

• Remove plugs from drums prior to filling.
• Purge drums with cool, dry air or an inert gas.
• Apply a nitrogen blanket to the drum after filling.
• Automatically install the plugs into the drum.
• Precisely tighten the plugs to the required torque.
• Automatically apply and crimp the cap seals.

All clamps are electrozinc plated. Different types of lugs and bolts and nuts is also available. Technocraft produces and supplies any special design clamp suitable for projection, spot welding or reveting.(We make about 100 types of Clamps).

Today Technocraft is the second largest producer of Drum Closures in the world with a production of over 25 Million sets of Drum Closures annually.

Our drum closures are now exported in millions to Drum Producer in Europe, USA, Middle East & South East Asia.

We have a wide range of options for Flange Insertion Dies:

• Individual manual dies consisting of 4 dies for 2" and 3/4" 1st operation and 2nd operation.
• Tandem Die consisting of 2 sets to do 1st operation and 2nd operation simultaneously for 2" and 3/4" Flanges.
• Single Operation Tandem Die capable of doing 2" and 3/4“ 1st operation and 2nd operation in one stroke.

We can also customize the dies for automatic feeding, inspection devices or any other specific requirements of customer.

The Leak Lock system is a two piece system which is used when the octagon flange gasket has been incinerated during the burning operation of the reconditioning process.

This plug replaces the traditional three piece system that uses a gasket, retaining ring, and hexagon plug.

The Leak Lock system alleviates the problem of alignment, therefore saving you time and assuring your customer a quality seal. This system is the simplest and most effective on the market to prevent flange leakage due to drum incineration.

Tite-Seal octagon flanges and round plugs meet all U.S. DOT and U.N. standards and are completely interchangeable with other similar brands of drum closures.

Standard Tite-Seal closures are electroplated with bright zinc and yellow passivated against corrosion.

Unplated, Tinplated, Nickelplated and Phosphatized closures can also be supplied upon customer request.

Tite-Seal closures are also available unplated or factory coated with standard U.S. manufactured chemical resistant and food grade linings to meet your exact specifications.

Tite-Seal flanges can be installed with industry standard insertion dies or with die sets which can be provided by Technocraft Industries.

Gaskets for Tite-Seal are available in Buna, EPDM, Polyirradiated, Teflon, Viton and Neoprene. Gaskets for Leak Lock plugs are available in Buna Gaskets for Tite-Seal closures are manufactured by Technocraft Industries (India) Limited, an ISO 9002 certified company.

Security capseals assure maximum protection for drummed products.

Steel security capseals are made of quality tin plated stel which is precisely formed, lined with a chemical resistant lacquer and fitted with a heat cured vinyl gasket.

A white enamel exterior is standard and multi-color custom litho printing is available.

Plastic security capseals are made from high quality polyethylene plastic and can be silkscreened with custom designs specified by our customers.

Manual and pneumatic capseal crimping tools are available for fast and effective installation.

Technocraft Industries announces the innovative Tite-Seal Brand S-Insertion of Octagon Base flanges. This new method of inserting flanges into drums provides the most secure closure available on the market today.

Technocraft Industries, with almost 30 years'experience producing drum closures, is a world leader in the drum closure industry. Through its advanced R&D efforts, the company has developed the new S-insertion method of installing flanges into steel drums.

The S-insertion method starts with the standard process of punching and forming the pocket for the flange and then installing it into the drum. The patented advancement that the S-insertion provides is the crimping of the pocket around the flange. This crimping operation pushes the metal at the bottom of the pocket under the flange, thus locking the flange into the pocket.

With normal insertions, in drop tests where the head of the drum falls flat on the ground, the flange is pushed out of the pocket. Leakage of the closures results. With our new S-Insertion method, perpendicular flat drop tests do not result in flanges jarred from the pocket.

The advantages of this innovative flange insertion method are:

• No change or increased cost of the flanges.
• No additional or thicker gasket on the flange is required that results in increased costs to manufacture.
• No change in closure procedures are required by the drum filler.
• The flange remains firmly seated in its pocket, unlike the standard flange insertions when drums are dropped perpendicular to the floor. The only change required is a tooling modification at the drum manufacturer's plant.
• To insure the safest, securest package available today, please consider specifying our S-insertion flange for your steel drum requirements.