An ISI marked manufacture from an ISO 9001:2000 Certified Company bringing you assured quality & interchangeability of parts. Has been tested as per ISI procedures for 50% over load, delivering assured safety levels. Equipped with a grade 80 load chain for long chain life. Assuring you reliability with its rugged german design and customer satisfaction spanning more than 30 years.

Double ball bearing supported load wheel for smooth operation. Precision machined case hardened alloy steel gears benefiting longer life span & noiseless operation. Fully pocketed malleable / S. G. iron cast load chain wheel for safe and smooth running. Anti rust and better aesthetics  With anti corrosive powder coated zinc plated parts.

Specifications/Dimensions (mm)
Capacity	MT	0.5	1	2	3	5	7.5	10
Number of Falls		1	1	2	1	2	3	4
Hand Chain required to be passed Over For Lifting Load through one metre	Metre(approx.)	52	52	104	104	152	228	288
Running Pull On hand chain	kgs.	13	26	28	43	49	50	61
Weight At 3 Metre Lift (approx.)	kgs.	21	21	30	35	60	88	126
Extra Weight Per Additional Metre Lift (approx.)	kgs.	2.9	2.9	4.3	4.3	5.2	7	14.4

Capacity	No. of Falls	For each hand chain. Hand chain required to be passed over for lifting load through one metre...metres (approx)	Running Pull On Each Hand Chain	Hook Opening	Weight For 1 M Addl. Lift (approx)
15 T	6	228	50 kg.	95 mm	22 kg.
20 T	6	228	62 kg.	95 mm	28.5 kg.

An ISI Marked Manufacture from an ISO 9001:2000  Certified Company Bringing you assured quality & Interchangeability of Parts. Has been tested as per ISI procedures for 50% over load, delivering assured Safety levels. Equipped with a Grade 80 Load Chain for Long chain life. Assuring you reliability with its Rugged German design and Customer Satisfaction spanning more than 30 years. Double Ball Bearing Supported Load Wheel for Smooth Operation.

Precision Machined Case hardened alloy Steel Gears benefiting longer life span & noiseless operation. Fully Pocketed Malleable / S. G. Iron Cast Load Chain Wheel for safe and smooth running & Long life. Indef also brings you an M Light Weight Model and Spark Proof Chain Pulley blocks.

We offer INDEF monorail trolley for moving the lifted load horizontally on I beam. These trolleys are used with chain pulley blocks or electric hoists. They are available in pull push, geared and electrical travelling type and capacity 0.5t, 1t, 2t, 3t, 5t, 10t etc.

Salient Features: Anti drop and de-railing guide, Precision machined runners mounted on sealed ball bearings, available in three basic range with further adjustment of flange width, Anti Corrosive Powder coated finish. 

Please send us your inquiry with Type of travelling, Load capacity, I Beam size, travelling speed required (in case of electric trolley)

Chain electric hoist is an ISI Marked product manufactured from an ISO 9001:2000 Certified Company, Bringing you assured quality & Interchangeability of Parts. Equipped with a Grade 80 Load Chain for Long chain life & a higher safety factor.

Assuring you reliability with its Rugged German design and Customer Satisfaction spanning more than 30 years. Precision Machined Case hardened alloy Steel Gears benefiting longer life span & noiseless operation. Has a Light weighted simple mounting design for ease of Installation. Equipped with a built in electrical control panel - Ready to use. Precision Machined & hardened Load Chain Wheel benefiting longer life span of LCW & smooth chain operation.

Capacity	kgs.	500 KG	1000 KG	2000 KG		500 KG	1000 KG	2000 KG
Chain Falls	no	2	2	4	A	750	750	860
Hoisting Speed	m/min	4.8	4.8	2.4	B	150	150	150
Hoist Motor	H.P.	1.5	1.5	1.5	C	120	120	120
Height Of max Lift (std 3m)	M	9.6	9.6	4.8	D	31	31	37
Length of control cable	M.	At your choice			E	525	525	525
Approx . Wt. With Chains For 3m Lift	kg.	63	63	65	F	285	285	285
Approx . Wt. Per Meter Additional Lift	kg.	2.6	2.6	5.2

With book suspension (picture 1)					Dimensions in mm.
Capacity	kgs.	500 KG	1000 KG	2000 KG		500 KG	1000 KG	2000 KG
Chain Falls	no	2	2	4	A	701	701	794
Hoisting Speed	m/min	4.8	4.8	2.4	B	150	150	150
Hoist Motor	H.P.	1.5	1.5	1.5	C	122	122	122
Height Of max Lift (std 3m)	M	9.6	9.6	4.8	D	31	31	37
Length of control cable	M.	at your choice			E	680	680	680
Weight With Chains For 3m Lift Lift Approx.	kg.	81	81	91	F	285	285	285
Weight Per Meter Additional Lift Approx.	kg.	2.6	2.6	5.2

Our Wire rope electric hoist is Manufactured in ISO 9001:2000 Certified Company. It Assured quality and interchangeability of parts, truely modular construction, easily accessible separate brake, motor, drum, gear box & panel unit.

Features:

• Seamless Pipe Accurately Machined rope drum:  Long Life.
• Unique and sturdy rope guide Arrangement: Prevents rope slackening and easy change of rope.
• Precision Machine Cut case Hardened Alloy steal gears: Noiseless Operation Long life
• Fail safe Disc Brake: Trouble free operation and ease of adjustment
• Built in Control Panel with Std. Electricals: Ready to use

Notes:

• When Cross Travel Motor on this side.
• Creep speed of 1:4 can be supplied at extra cost with 60 mm increase in dimensions A & K.
• Bogie trolley can be supplied at extra cost for operation on curved path min. radius of curvature of 1 metre with head room dimensions 'C' increased by 100 mm.
• Trolley Brake can be supplied at extra cost and dimension 'G' will be increased by 125 mm.
• Optional  Trolley Speeds (MPM) = 1.6, 3.2, 5.1, 6.8, 10 upto 3 Tons and 1.9, 2.8, 4.1, 8.2, 11.6, 25.8 for 4 Tons
• Short head room model can be developed & supplied at extra cost.
• Overload Limiting Device OR gravity type emergency limit switch can be given at extra cost. Headroom will increase by 300mm.

Planetary gear box has got modular construction and its every single stage consists of one internal gear meshing with three or four planet gears mounted on planet carrier. These are also engaged with sun gear which is meshing with planet gears and is transmitted out by planet carrier maintain the same direction of rotation. The planet carrier is connected to the output shaft of the gear unit. The design feature employed with the sun gear floating amongst the planet gears together with accurate machining of parts,grants uniform load distribution among the planet gears.

The material used is low carbon nickel chrome and molybdenum alloy steel for gears and high carbon steel for shafts. Casings are made up of graded cast iron or cast steel as necessary to withstand the loads on the output shaft. Planet gears run on needle bearings while deep grove ball bearing or roller bearings are used on drive shafts.

The gear boxes are available either foot mounted or flange mounted construction and drive can be given by pulley/sprocket or coupling with help of solid shaft. Female shafts and flange type are also available to mount the direct electric motor of flanged mounted construction as per IEC standards.

The gear boxes can be offered either bevel or worm & worm wheel at the input to have right angled transmissions wherever orientation & application demands for.

The JP 2500 hydraulic pallet trolley lifts and transports 2500 kg pallet loads effortlessly. The trolley is invaluable owing to its utility inside factories, warehouses, docks, railway workshops and wherever pallets are to be transported in the most efficient and reliable way.

• Maximum capacity – 2500 Kg.
• Tandem roller wheel for smooth movement on uneven surfaces.
• Special model available for low entry pallets.
• Special model with weighing scale available.
• Optional fork width of 680 mm available.
• Low maintenance costs because of fewer breakdowns.  
• Built in overload valve and totally sealed hydraulic pump. Seals of hydraulic pump are German make.
• Heavy duty one piece "c" section forks for greatest strength and durability.
• Nylon entry rollers prevent physical exertion of the operator and protect load wheels and pallet.

Josts' material handling stacker are simple economic solution for storage and retrieval of pallets at vertical storage spaces a the least cost.

• Fully manual operation.
• Latest Technology of Hydraulic Pump.
• Special light mast.
• Saves time and manpower.
• Light and easier to handle, ensures stability of operation.

Josts manual hand stacker are simple economic solution for storage and retrieval of pallets at vertical storage spaces at the least cost.

• Fully manual operation.
• Latest Technology of Hydraulic Pump.
• Special light mast.
• Saves time and manpower.
• Light and easier to handle, ensures stability of operation.

We deal in material handling cranes having following features:

• Modular Construction: Standardised – assemblies
• Proven Design: Crab fitted with time tested Indef Hoist, CT/LT drives.
• Crane Kits available: Saving on transportation of structural parts.
• Standard Range: 0.5 T, 1T, 2T, 3T, 4T, 5T, 6T, 7T, 7.5T, 10T, 12.5T, 15T, 20T, 25T, 30T, 40T
• Suspended from the roof structure: Under slung cranes take up little space
• Utilize building floor for production: Maximum lifting heights can be achieved, even in low buildings.

Note: Hook position is assumed at centre of rope drum. Beam will be provided suitable joint beyond 11m span.