|
 |
Electrical Cables
|
We are specialized in designing and manufacturing of a broad array of cable wires like Shielded Cable, Instrumentation Cable, Signal Cable, Screen Cable,Fire Alarm Security Cables, RTD Cable, Armoured Cables, Co-axial cables, Flexible Cables, Power Cables, etc. These cables can be availed in standard specifications used in various industries as well as we also provide customization to our range of products. Our comprehensive range of products are as follows:
|
 |  |  |  |  | Co-Axial Cables Co-Axial cables: Techno flex have rich excperience of manufacturing superior quality digital VSAT satellite telecom cables and Radio frequency Co-axial cable, RG Series 6/59/11/8/174/62.. Special Features: - High Band width
- Low attenuation value
- Minimum structural return loss
- Low loss in signal quality
- Ideal for power pass application
- Clear in reception
Application
Specially used in electronic and digital instrument wiring / CCTV and Audio Visual VSAT/DATA cabling and recorder Multiocation network or surfacing etc. | Description | Solid Copper diameter | Foam Insulation OD in mm | Shield Braiding Coverage | Thickness of Over Sheath in mm | Nominal Impedance Ohms | Nominal Capacitance pf/mtr | Nominal Velocity of Propogation | | RG 6 | 1.02 | 4.6 | ATC 90-95% | 0.80 | 75 | 53 | 83% | | RG 11 | 1.63 | 7.1 | ATC 90-95% | 1.20 | 75 | 53 | 84% | | RG 59 | 0.81 | 3.7 | ATC 90-95% | 0.80 | 75 | 53 | 83% | | RG 58 | 0.78 | 3.0 | ATC 90-95% | 1.80 | 53.5 | 95 | 78% | | RG 213 | 2.0 | 7.3 | ATC 90-95% | 1.3 | 50 | 95 | 66% | | RG 8 A/U | 2.74 | 6.4 | ATC 90-95% | 1.2 | 50 | 100 | 66% |
|  |  |
 |  |  |  |  |
 | Flexible Cables Techno Flex manufacture high quality cables according to IS: 694:1990 for house hold and industrial lightening purpose. We never compromise to use sub-standard raw material instead of high standard & hence Techno Flex consistently remain with the high degree of quality. These cables are suitable for fixed wiring, flexible operation & for use on AC single phase systems for rated voltage up to and including 1100 Volts. These cables can be used on DC systems for rated voltage up to & including 1500 Volts to earth. Construction Details:- - CONDUCTOR : Solid / Stranded / Multistrandcd high conductivity annealed copper wires to meet the requirements according to
- IS : 8130 : 1984. Copper gets corrode in the atmosphere where sulphur fumes are present, in such conditions Tinned Copper should be used.
Insulation :- - Type A : Elastomer PVC suitable to withstand maximum rated continuous operating temperature upto
- 70°C of conductor & the rated voltage upto and including 1100 Volts.
- Type B: Insulation suitable to withstand maximum rated continuous operating temperature upto
- 70°C of conductor & the rated voltage above 1100 Volts.
- Type C :Heat resisting compound for maximum rated conductor temperature 85°C to the rated
- voltage upto & including 1100, Volts. We always print HR85
CORE IDENTIFICATIONS : Insulation colour arc in accordance with IS: 694:1990 specification, as under: | No Of Cores | Cables For Fixed Wiring | Flexible Cables | | 01 | Red. Black, Yellow. Blue. White or Gray | Red, Black. Yellow. Blue. While or Gray | | 02 | Red & Black | Red & Black | | 03 | Red. Yellow, Blue | Red, Black, Green | | 04 | Red. Yellow. Blue. Black | Red, Yellow, Blue, Green | | 05 | Red. Yellow, Blue. Black, Gray | Red, Yellow, Blue, Black. Green | | 06 & Above | Two adjacent cores Blue & Yellow counting & direction cores and remaining Grey in each layer or printing numbers over each cores or by different colours. | LAYING UP : In case of Multicore cables, cores are laid up with suitable equidistance lay at right hand side direction. SHEATH : The over coating of PVC over the single core insulated wire or multicore laid up wires is called the sheath. The compound should be as per IS : 5831 : 1984 but dimension should be according to IS : 694:1990. We consider the customer requirement according to their special use. |  |
 |  |  |  |  | Thermocouple Compensating Cables cOMPENSETTING tHERMOCOUPLE CABLE: Techno flex Compensetting thermocouple cable which one is a economical alternative as compare to the thermocouple extension cable where single multipair conductor utilizing dissimilar metallic conductors than that of the thermocouple but having similar e.m.f. temperature characteristics over a limited range. ApplicationUsed for interconnecting the thermocouple to the measuring instruments. | Cable Code | KX | KX(A) | TX | JX | KX | SX/RX | | Cable Type | Ext. | Comp. | Ext. | Ext. | Ext. | Comp. | |
Conductor | +Ve Leg | Chromel | Copper | Copper | Iron |
|
| | -Ve Leg | Alumel | Constant | Constantant | Constantant | Constantant | Cooper Alloy | | Suitable for Thermocouple Type | KX | KX(A) | TX | JX | KX | SX/RX | | Temp. Range of measuring junction | 0 to 1100°C | 0 to 1100°C | -185 to +3000°C | +20 to +700°C | 0 to 800°C | 0 to 1550°C 0 to 1600°C | | Applicable Standards for output of Thermocouple Conductor | IS: 8784 & BS:4937 Part-4 | IS:8784 | IS: 8784 & BS:4937 Part-5 | IS: 8784 & BS:4937 Part-3 | IS: 8784 & BS:4937 Part-6 | IS: 8784 & BS:4937 Part-6 |
|  |  |
|