Centrifugal Pump

Item Code: HS-HSS-50Hz

Features:-
 

• HS/HSS - double suction horizontal split case centrifugal pumps ( 50HZ )

Applications:-

•Designed for heavy-duty, high efficiency applications
•High efficiency and low power consumption
•Low NPSH requirement
•Low noise level
•Easy maintenance
•Exceptional CIP
•Unique spiral-shaped casing and double curved impeller
•One sized shaft seal
•Field interchangeable a single seal to double seal in minutes
•Optional base mount version
•Maximum pressure : 116 psi(8 bar)
•Maximum capacity : 440 GPM(100 /hr)
•Ideal for hygienic process in dairies, food, soft drink,
•Pharmaceutical, brewery and water treatment

Item Code: WXBSingle-Stage

Single Stage End Suction Centrifugal Pumps, with bearing bracket. WXB series are designed in accordance with ISO 2858. The bearing housing contains two frictionless ball bearing. The bearing can be lubricated by oil or grease as Options.

Applications

•     Air Conditioning
•     District Heating
•     Water Supply
•     Process System
•     Fire Fighting
•     Environment Engineering

Working Conditions

•     Thin, clean and non-flammable liquid without solid grain and fiber
•     Liquid temperature: -10 C — +180C
•     Operating Pressure: Max 16 bar
•     Environmental Temperature : + 40 C
•     Altitude: up to 1000M

Features:-

• Back Pull-Out Design :- Pull-Out construction which allow bearing housing, stuff box, impeller and associated component to be removed without dismantling the pipe work. Added a coupling to disassemble the pump body without dismantle the motor.
• Center line Discharge Design :- Center line Discharge Design simplify the pipe work.
• Strong Support :- Pump House with foot can provide strong support to prevent misalignment and distortion from the pipe loads.
• Dynamic Balance :- Dynamic balance calibrated impeller which pump will be in low noise, low vibration and more high efficiency in operation.
• Replaceable Shaft Sleeve : -Replaceable shaft sleeve is prevented the normal wear from the stuffing box.

Item Code: WXB

Single Stage end suction centrifugal pumps, with bearing bracket. WXB Series are designed in accordance with ISO 2858. The Bearing housing contains two frictionless ball bearing. the bearing can be lubricated by oil or grease aas options.

Application

• Air Conditioning
• Water Supply
• Process System
• Fire Fighting
• Environment Engineering

Word Conditions

• Thin, clean and non-flammable liquid without solid grain and fiber
• Liquid temperature: -lot + I 801C
• Operating Pressure: Max 16 bar
• Environmental Temperature : + 40t
• Altitude: up to 1000M

Features

• Back Pull-Out Design:-Pull-Out construction which °Low bearing housing, stuff box, impeller and associated component to be removed without dismantling the pipe work Added a coupling to disassemble the pump body without dismantle the motor.
• Center line Discharge Design:- Center line Discharge Design simplify the pipe work.
• Strong Support:- Pump House with foot can provide strong support to prevent misalignment and distortion from the pipe loci.
• Dynamic Balance:- Dynamic balance calibrated impeller with pump will be in low noise, low vibration and more high efficiency in operation.
• Replaceable Shaft Sleeve :-Replaceable shaft sleeve Is prevented the normal wear from the stuffing box.

 

Many Option in Difference Operation:-

• Difference Shaft Seal such as Soft Pocking. Double Mech. Seal, Cartridge Mech. Seal. Quench Arrangement-Q. etc
• High Temperature Cooling System
• Open Impeller In Sewage application
• Lubrication: level Oiler, Level, level Inc:gad/or etc
• Heavy Duty Shaft and bearing, Doubling Bearing etc

The Verdermag series of pumps comprises the metallic Global and the non-metallic heavy duty TB, U, V&W series and the normal duty V-MD, GPMD and GLMD versions. The Verdermag range is therefore a complete, well-balanced series of magnetically coupled centrifugal pumps. As with all series of Verdermag centrifugal pumps, emphasis is on maximum interchangeability and quality improvements, hence all products are covered by a two-year guarantee, as well as the standard Verder warranty package.

Features and advantages Simple by design - Fewer parts are used in the whole pump than most conventional seal cartridges ensuring easy maintenance and assembly Mag drive coupled: completely leak free Mag drive centrifugal pumps are being used in a wide range of industrial areas: Chemical industry Acrylic acid, 50% aluminum chloride, hydrofluoric acid 50%, hydrogen sulfide, 85%, sulfuric acid, 98%, ammonia, phosphate and many others Electronics industry Plating, etching, ferric chloride, hydrochloric acid 37%, sodium hydroxide 50% Mining Brine with uranium solids, H2O, soda ash, HCl Galvanic industry Plating, etching, filtration Pharmaceutical industry Sodium hydroxide 50%, caustic soda, hot oil, solvents Steel industry Hydro chloric acid, pickling liquor, sulfuric acid The series of mag drive centrifugal pumps from Verder consists of a wide range of both metallic and non metallic pumps. Verder has more than 40 years of experience in mag drive centrifugal pumps and is an expert in choosing the most adequate pump for your pumping application.

Item Code: WXC

The WXC pumps series comply fully to the European standard DIN24255. This standard covers both performance and dimensions. The WXC pumps series are used for pumping clean water of liquids with Characteristics similar to water. They are suitable for plants, mines, City water supplies, air-conditioning coolers, firefighting system and irrigation.

 

For a pump of same the model, the performance can be changed by Trimming the outer diameter of the impel­ler. Only four shafts are required to cover the total range, and this gives many common interchangeable parts for pumps filled to the same shaft Just like the shaft, the bear­ing house has only for sizes for the whole series.

 

The pump has a back pull-out design, and when a suit­able spacer coupling is fitted to a direct coupled unit the casing and motor can remain in position while all other pump parts can be removed for simple and quick main­tenance.

Applications

 

• City Water supply - Air-Conditioning
• Firefighting System
• Irrigation

 

Working Conditions

 

• Design: Horizontal, Single-Stage Volute Casing pumps with dimensions and nominal ratings standard to DIN24255.
• Type: End Suction Centrifugal, back pull-out
• Flange: DIN2332 PN lORF
• Direction of Rotation: Clockwise as viewed from the drive side.

Material:

 

• Casing    — Cast Iron and Ductile Iron standard;
• optional Stainless Steel
• Impeller — Bronze standard, optional Cast Iron & Stainless Steel
• Shaft    — A1S1420 standard, optional AISI304 & AlS1316 Shaft Seal — Mechanical Seal Standard
• Carbon-Sic / Vinton(optional)
• Optional Gland Packing

 

Operating Range:

 

• Flow Rate(Q) :2-1100m3/h
• Head(H)    :2-150m
• Speed    :1450-2900 rpm(50Hz)
• 1750-3500 rpm(60Hz)
• Temperature :-10°C to 105°C standard; optional 105°C Using pressure:10Bor standard; optional 16 Bar

 

 

Item Code: HS-HSS

HS/HSS Double Suction Horizontal Split Case Pumps Is designed for high capacity, low head applications.

Features:

• IPP Pump -HS/HSS double suction horizontal split case centrifugal pumps
• Inlet Dia DN : 125 ~ 1000 mm
• Capacity : ≤ 1230 m³/ hr
• Head H : ≤ 150 m
• Working temperature T: ≤ 105^oC

Construction:-

Casing: Horizontal split upper and lower half polled and doweled together. Suction and discharge branches are cast integrally with the lower halt Removal of upper casing permits Inspection, maintenance and removal of entire rotating element without disturbing suction and discharge piping or pump and driver alignment. Upper half casing has seal water piping, priming and vent connection with vent cock and lifting lugs. Lower half casing contains topped openings for gauges and drainage. Nameplate Is stainless steel. Pump Is available in horizontal but also vertical installation.

Impeller: The impeller Is of the enclosed double suction Nib°, In one piece , providing hydraulic balance. All exterior surfaces are machine finished. Interior surfaces or water ways are smoothly. Impeller is accurately balanced and keyed to shaft.

Wearing Rings: Renewable cast iron casing wear rings are held in position by tongue and groove, engaging both upper and lower halves of [he casing, preventing leakage loss around the outside surface of these rings. Impeller wear rings can be furnished for large pumps, during maintenance, only replace impeller wear rings when it Is not necessary to machine the impeller.

Shaft Bearing: Grease lubricated ball bearings are standard for groups S and M, oil lubricated ball bearings are standard for group L. a pair of single row angular contact bearing Is standard for group LL and above. The thrust bearings are securely locked In the thrust bearing housing and take radial and unbalanced thrust load. The coupling end bearing is tree to float axially in the bearing housing and takes radial load only.. By the rotation of an oil ring, oil can be picked up to lubricate bearings, a constant level boiler maintains proper oil level In the housing
 

Flange Drilling: All suction and discharge flanges are drilled to PNI6 as standard. ANSI and JIS can be supplied by request. In pumps operating above 16 bar special flange drilling ( PN25) will be supplied.

 

Application:

 

• industrial and Municipal Water Supply
• Cooling Water and Hot Water Circulating system
• Air Conditioning System - Water Treatment Plants
• Fire Fighting System - Sprinkler Pumping Stations

 

Item Code: MVI-MVIF

Application:

• Urban Water Supply
• Pressure Boosting for Building, Cleaning, Wash-down
• Industrial Circulating System and Processing System
• Water Supply for Boiler and Condensate System
• Environmental Water Treatment
• Reverse Osmosis Process
• Machine Tools Lubrication


Working Conditions

• Hot and cold clean, non-flammable non-explosive liquid without solid grain
• Liquid temperature: ambient temperature -15c -+70c
• Hot Water Temperature +70c-120°C
• Environmental temperature : 40 t
• Altitude: up to 1000 M

Item Code: MHE-50-60HZ

Horizontal Multi Stage Centrifugal Pump providing Constant Pressure Of water supply in domestic and commercial applications such as Motel, Sprink Jet, SPA. Villa etc. MHEE are integrated with MHE pump, Customized Controller with pressure sensor and frequency inverter. The controller senses the pressure change by pressure transmitter and compares the feed back signal with set point.
Features:

• Provide Constant Pressure :- the screw of the controller setting the pressure of the water system, the booster maintain the pressure of the set point.
• Motor Stop Function :- When water supply is In low or no flow, the controller will stop the pump for energy saving and longer the booster life time.
• Leakage Detection Function :- The controller monitor the water pressure continuously When the pressure Is under 60% of the set point. It will start the puma to compensate for the pressure drop.
• Dry Running Protection :- The booster stop when the controller sense in dry running status.
• Energy Saving
• IPP Pump - MHE horizontal multi- stage centrifugal pump 50/60HZ
• Head : max 50M
• Flow Rate 20M3/hr
• Maximum Pressure : Max 10bar
• Pumped Liquid :
• Ambient Temperature - 15^oC ~ + 70^oC
• Hot Water Temperature + 70^oC ~ + 110^oC

Item Code: 50-60HZ

Series MHE is a Horizontal Multistage Stainless Steel pump, All wet puts, including volute casing. shaft moaner are made of stainless steel for long time endurance and rust free liquid transfer. The multistage design is to increase the pressure by increase the no of Impellers but without change of the flow rate. Pump Body and motor are integrated together. So, the pump is very compact for limited space Installation. There are few types of shaft seal selection in various applications. Single Phase and Three phase motor are available. The motor specifications are IP55, Class F and Eff 2.

Application:

• Domestic Water Supply - Pressure Boosting
• Reverse Osmosis
• Light Chemical Industry
• Food Processing
• Industrial Cleaning
• Cooling System
• Air-Conditioning System

Features:-

•  WSCP - cast stainless steel single - stage centrifugal pumps 50HZ