•  We offer various types of alternator test rigs. The test rigs are designed for 30amps to  400amps for 6v/12v/24/48v ALTERNATORS.
  
• The test rigs are available in 20 models with single speed, multi speeds and variable speed options. Vacuum pump test facility is also available in some of the models. All the equipments are fitted with latest digital meters and latest facilities for user friendly operation

Features:

•  Built-in Power source for excitation for the alternator, battery charging facility is also available to charge the battery from the alternator under test, so that the alternator performance can also judjed.
  
• For speed variable systems the speed is picked up right from the alternator pulley through non proximity sensor and indicator.
• The exact graph specified by the manufacturer can be obtained from this test rig.

The Test Rigs are designed for light run,run torque and lock torque of the starter with 6v/12v/24/48v. The test rigs are available in various models. • Simple Test Rig to check car starter with light run & run torque, which provides voltage & current. • Heavy Duty Starters Test Rigs for Heavy Vehicles to check the light run & run torque. • Complete Starter Performance Test Rig with PC Inter-phasing, operation through PC with print out facility.
Features : Built-in AC/DC power source, loading through latest technology powder brake system,torque sensing by torque sensors.

• We offer various types of small testers to be used in automobile garages and battery manufacturers. • Two wheelers batteries testers are designed in smaller models. Battery chargers cater to charging of single battery to maximum of 10battreies with microprocessor base charging with closed loop monitoring so that the battery is cut off automatically after it is fully charged. Alternator regulator tester digital model is used to identify the faulty regulator in an alternator. This is universal model to check all types available in the market. • Growler testers are available in two models to check the armature of starters. Distributor test rigs are designed to check the latest electronic distributor for MPFI vehicles. • Ignition coil testers are designed to check the coils & spark plugs of the vehicles at a economical price. Vehicle electrical system demonstrate the complete vehicle electrical system which can be used to explain to students in institutes.

Fip test bench with electronic stroke/rpm counter and required basic accessories Option with the following: • Hydraulic drive • Belt drive • Thyrister type electronic drive

The furnace control panels are designed to meet the customers requirements with continuos duty rating from 5KW TO 500KW rating. This is fitted With all digital meters with pid controller, thyrister controllers, furnace moving system with interlocking & limit switches. These panels are fitted with scanners, recorders to record the status of the furnaces .

These panels are used for Effluent, sewage and other water treatment plants. The panel is designed of various types like: • Relay Logics Type • PLC based • Touch Screen Type • PC Interphase using SKADA. All these panels are designed to operate the plant in auto mode and as well as in manual mode.The control panels are designed with utmost care using the latest technology I/O cards thus reducing the space and also it performs accurate operation with accuracy in milliseconds. The response time is so fast that the output from these panels are so accurate that we get the maximum output with minimum wastage. The panels are either skid mounted, wall mounted or stand alone depending on its size.

We are engaged in manufacturing high quality ETP/STP Panels, which can be customized as per specific requirements of client. All these panels are integrated with PLC, SCADA, TOUCH SCREEN, depending on the clients specs.

All the panels are today integrated with plc . these panels are used for all application where the operator is unable to operate with precision and accuracy .the maximum no of I/OS which can be programmed depends on the clients requirements which can even go upto 2000.

These panels are used for concrete, bitumen & other mixer application. These panel is designed of various types like: • Relay logics type. • PLC based. • Touch Screen Type • PC Interphase using SKADA. All these panels are designed to operate the plant in auto mode and as well as in manual mode. The control panels are designed with utmost care using the latest technology I/O cards thus reducing the space and also it performs accurate operation with accuracy in milliseconds. The response time is so fast that the output from these panels are so accurate that we get the maximum output with minimum wastage . The panels are either skid mounted, wall mounted or stand alone depending on its size.

• These panels are used for correcting the power factor of the load with inductive lagging pf. • The APFC uses the concept of sensing the load current, voltage, phase difference between them and then analyzing the system using microprocessor and correcting the phase angle between the voltage.

This test bench is operated by computer where the results are printed with the actual reading of the alternator.The alternator can be programmed to operate at stringent conditions to enable to debug the fault by simulating the vehicular conditions.
The test bench can be run manually also .This is the complete electrical equipment for testing alternator which would be very useful for all new generation mpf vehicles