Heavy Duty Lathe Machine, Medium Duty Lathe Machine, Light Duty Lathe Machine, High Precision Hydraulic Surface Grinder, High Precision Surface Grinder, Universal Milling Machine

PRODUCTS
		Heavy Duty Lathe Machine

		Medium Duty Lathe Machine

		Light Duty Lathe Machine

		High Precision Hydraulic Surface Grinder

		High Precision Surface Grinder

		Universal Milling Machine

		Slotting Machine

		Power Press

		Pillor Drilling Machine

		Extra Heavy Duty Lathemachine

Precision Engineering Machines

We are a professionally managed company surging ahead with zeal to make valuable contribution to the industry. Our range of heavy duty lathe machines, light weight centre lathe machines are known for the uncompromising levels of quality. The encompassing range that we manufacture to meet the increasing demands of various industries include:

Send Bulk Enquiry

Heavy Duty Lathe Machine

Technical Specification

Capacity Height of centre : 254 mm Swing over slide : 280 mm Swing over bed : 450 mm Swing in gap : 760 mm Admit between centre : 1000 mm Length of bed : 2130 mm Width of bed : 325 mm	Head Stock Hole through the spindle : 50 mm Taper bore in spindle : M.T. - 6 Spindle nose : 6 T.P.I. Range of spindle speeds : 30 to 500 R.P.M. Spindle speeds : 8
Threads Pitches Metric Threads : 1 to 7 mm Inches Threads : 4 to 28 T.P:I.	Lead Screw Diameter : 38 mm Threads : 4 T.P.I.
Drive and Electricals Motor : 2 H.P. Head stock belt : Buss Type	Tail Stock Tail stock spindle die : 60 mm Taper bore in spindle : M.T.- 4 Tail stock spindle travel : 200 mm
Weight and Dimensions Net weight of Machine : 1300 kg. Floor space : 1250 x 2500 Total height : 1300 mm Between Centre : 5' -6", -500 mm Between Centre : 7', -1000 mm Between Centre : 9', -1600 mm Between Centre : 10', -1900 mm Between Centre : 12', -2500 mm	Standard Accessories Face Plate Chuck Plate Steady Rest Follow Rest Motor Pulley Change Gear - .S.W-13 Change Gear - M.M.-3 Dead Centres -2 Nos. Centre Adopter Tool Post Key	Carriage Compound slide swivelling Degree : 45-0-45 Cross slide size : 200 mm X 500 mm Carriage size : 450 mm X 500 mm Cross slide trave : l 280 mm Top slide travel: 150 mm

Send Bulk Enquiry

Medium Duty Lathe Machine

Technical Specification

Capacity Height of centre : 225 mm Swing over slide : 250 mm Swing over bed : 425 mm Swing in gap : 700 mm Admit between centre : 500 mm Length of bed : 1370 mm Width of bed : 275 mm	Head Stock Hole through the spindle : 50 mm Taper bore in spindle : M.T. - 6 Spindle nose : 6 T.P.I. Range of spindle speeds : 30 to 500 R.P.M. Spindle speeds : 6
Threads Pitches Metric Threads : 1 to 7 mm Inches Threads : 4 to 28 T.P:I.	Lead Screw Diameter : 38 mm Threads : 4 T.P.I.
Drive and Electricals Motor : 2 H.P. Head stock belt : Belt	Tail Stock Tail stock spindle die : 50 mm Taper bore in spindle : M.T.- 4 Tail stock spindle travel : 150 mm
Standard Accessories Chuck Plate Motor Pulley Change Gear - B.S.W-13 Change Gear - M.M.-3 Dead Centres -2 Nos. Centre Adopter Tool Post Key	Carriage Compound slide swivelling: Degree : 45-0-45 Cross slide size : 175 mm X 400 mm Carriage size : 375 mm X 400 mm Cross slide trave : 235 mm Top slide travel : 125 mm
Capacity Height of centre : 165 mm Swing over slide : 190 mm Swing over bed : 500 x 112 mm Swing in gap : 315 mm Admit between centre : 725 mm Length of bed : 1370 mm Width of bed : 235 mm	Head Stock Hole through the spindle : 40 mm Taper bore in spindle : M.T. - 5 Spindle nose & size : 6 T.P.I. Range 62 mm x 8 TPI Spindle speeds : 40 to 950 R.P.M. Spindle speeds: 8

Send Bulk Enquiry

Light Duty Lathe Machine

Technical Specification

Capacity Height of centre: 165 mm Swing over slide: 190 mm Swing over bed: 500 x 112 mm Swing in gap: 315 mm Admit between centre: 725 mm Length of bed: 1370 mm Width of bed: 235 mm	Head Stock Hole through the spindle: 40 mm Taper bore in spindle: M.T. - 5 Spindle nose & size: 6 T.P.I. Range 62 mm x 8 TPIle speeds: 40 to 950 R.P.M. Spindle speeds: 8
Threads Pitches Metric Threads: 1 to 6 mm Inches Threads: 2 to 24 T.P.I.	Lead Screw Diameter: 25.4 mm Threads:4 T.P.I.
Drive and Electricals Motor:1 HP, 1440 rpm Head stock belt: B -52	Tail Stock Taper born in sleeve M.T. -3 Sleeve Travel 125 mm Sleeve Dia 38 mm
Carriage Compound slide swivelling: degree: 45-0-45 Cross slide size: 175 mm X 400 mm Carriage size: 375 mm X 400 mm Cross slide trave: 235 mm Top slide travel: 125 mm

High Precision Hydraulic Surface Grinder

Send Bulk Enquiry

High Precision Hydraulic Surface Grinder

Base: The saddle and column of the vertical feed mechanism are supported by the heavy duty casting of the base. Base is ground finished all over to ensure high accuracy.
The Grinding Wheel Spindle: is mounted on preloaded grease packed super precision angular contact anti-frication bearings, ensuring trouble free service for a long time. The spindle is directly driven by flange mounted motor (to eliminate any vibration) through flexible couplings.
The Wheel Head Assembly: is mounted on a heavy column enclosed guide ways with cover to keep them dust free.
Carriage: are perfectly hand scrapped and matched guide ways to achieve maximum accuracy and surface finish.

Technical Data

Specification	TMT-225	TMT-250	TMT-300
Working surface of the Table	225 X 450 mm.	250 X 500 mm.	300 X 600 mm.
Maximum height from table to Grinding Wheel	275 mm.	275 mm.	300 mm.
Vertical feed/ Cross feed Graduation	0.01 mm./ 0.05 mm.	0.01 mm./ 0.05 mm.	0.01 mm./ 0.05 mm.
Power of Hydraulic Pump	0.75 KW- 1 HP	0.75 KW- 1 HP	0.75 KW- 1 HP
Spindle speed	2800 R.P.M.	2800 R.P.M.	2800 R.P.M.
Size of Grinding wheel (Dia X Width X Bore)	200 x 13 x 31.75 mm.	200 x 13 x 31.75 mm.	200 x 13 x 31.75 mm.
Electric Motor recommended	0.75 KW -1 HP	0.75 KW -1 HP	0.75 KW -1 HP
Wheel Balancing Stand recommended	One	One	One
Weight of machine (Apprx.)	800 kgs	1000 kgs	1250 kgs

Send Bulk Enquiry

High Precision Surface Grinder

Specification	TMT-225	TMT-250	TMT-300
Working surface of the Table	225 X 450 mm.	250 X 500 mm.	300 X 600 mm.
Maximum height from table to Grinding Wheel	275 mm.	275 mm.	300 mm.
Vertical feed Graduation	0.01 mm.	0.01 mm.	0.01 mm.
Cross feed Graduation	0.05 mm.	0.05rnm.	0.05 mm.
Spindle speed	2800 R.P.M.	2800 R.P.M.	2800 R.P.M.
Size of Grinding wheel (Dia X Width X Bore)	200 x 13 x 31.75 mm.	200 x 13 x 31.75 mm.	200 x 13 x 31.75 mm.
Electric Motor recommended	0.75 KW -1 HP	0.75 KW -1 HP	0.75 KW -1 HP
Wheel Balancing Stand recommended	One	One	One
Weight of machine (Apprx.)	800 kgs	1000 kgs	1250 kgs

Send Bulk Enquiry

Universal Milling Machine

Specification	No. 2 (K-2H) Milling Machine without Elect 1 Feed
Table
1. Working Surface	1050 * 250 mm.
2. No. of T. Slots & Size	3 & 16 mm.
3. Dist. Betn. T-Slots	63 mm
4. Table Swivelling Side to Side	25 Degree
Range
1. Cross feed by hand	250 mm.
2. Vertical feed by hand.	450 mm.
3. Longitudinal feed by Hand	650 mm.
4. After Mounting vertical attachment, vertical move.	300 mm.
5. Max. Safe weight on table	150 kg.
Spindle
1. Spindle Arbour	25.4 mm.
2. No. of Spindle speeds.	6
3. Range of Spindle RPM	65 to 635 RPM
4. Spindle Nose taper	ISO-40
5. Size hole through spindle.	22 mm.
6. Dist. from base of over arm to spindle center	140 mm.
7. Spindle bearing front	32214
8. Spindle bearing rear	32211
Feeds
1. No. of feeds	3
2. Longitudinal feed mm. / rev.	.23,.46,.79 mm. / Re.no.
Drive
1. Spindle motor 1440 RPM	1.5 kw., 2 HP.
2. Pump Motor	1/10 HP.
Packing Details
1. Floor Space	650 * 1020 mm.
2. Height	1600 mm.
3. Weight	1250 kgs.(approximately)

Send Bulk Enquiry

Slotting Machine

Technical Specification

Model	TMT -25	TMT -30
Stroke	10 mm to 150 mm	10 mm to 250 mm
Longitudinal Movement	200 mm	230 mm
Cross Movement	110 mm	230 mm
Speed Adjustment	3 Speed	3 Speed
Ram Adjustment	150 mm	250 mm
H.P.	1 H.P.	1-5 H.P.

IMT – 25 Square Table

A-330 mm
B-310mm
C-280 x 280 mm

IMT – 30 Square Table

A-330mm
B-410mm
C-280 x 325 mm

Extra Requirements

1.Rotary table with 36 :1 ratio (250 mm)
2.Electric motor
3.True chuck
4.Switch
5.V-belt

Send Bulk Enquiry

Power Press

Description	10 tons	20 tons	30 tons	40 tons	50 tons	60 tons	80 tons	100 tons	150 tons
Crank Shaft Dia	58	73	83	89	95	102	114	127	152
Stroke Adjustment	6-40	10-62	13-75	13-87	13-100	13-112	13-112	13-125	13-125
Hole in Ram	40	50	50	50	50	60	60	60	60
Hole in Bed	25	32	38	40	51	51	51	55	60
Length & Width of Bed	70	89	102	115	127	127	127	191	200
Dist Bed to Ram	381-228	455-250	508-355	535-381	550-406	562-406	600-450	750-558	915-610

Send Bulk Enquiry

Pillor Drilling Machine

SPECIFICATIONS / MODEL NO.	TMT -1	TMT -2	TMT -3
Drilling cap.(in still)	25 mm	19 mm	13 mm
Column diameter	87.5mm	75mm	49.5mm
Spindle Centre to Back Distance	254mm	215mm	140mm
Spindle Nose to Table Distance	685mm	520mm	370mm
Spindle Nose to Base Distance	1080mm	860mm	530mm
Table Travel	310mm	250mm	350mm
Taper in Spindle	M.T. 3	M.T. 2	M.T. 1(Socket Type)
Numbers of Speed	8 SPEED	8 SPEED	4 SPEED
Range of Speed	73 X 1980 RPM	130 TO 2260	750 TO 2415
Table Size	390mm	330mm	230mm
Base Size (Machined Area)	360x370 mm	330x320 mm	175x175 mm
Overall Base Size	600x390 mm	490x330mm	300x185 mm
Spindle Travel	252 mm	200 mm	76 mm
Column Length	1460 mm	1200 mm	800 mm
Overall Height With Pulley Guard	1740 mm	1440 mm	910 mm
V-Belt Section	B 52	B 42	FHP 2334
Net Weight	260 Kgs.	130 Kgs.	55 Kgs.
Motor 1440 RPM 3 Phase 440 Volts	1 H.P.	1 H.P.	0.5 H.P.

Send Bulk Enquiry

Extra Heavy Duty Lathemachine

No.	Specifications	TMT - 18	TMT - 24	TMT - 30
1	Length of Bed (mm)	3000 to 12500	3000 to 12500	3000 to 12500
2	Admit between center (mm)	1750 to 11300	1500 to 10800	1000 to 11400
3	Height of center (mm)	450	600	750
4	Bed width (mm)	450	600	750
5	Swing over bed (mm)	900	1200	1500
6	Swing over cross slide (mm)	600	850	1150
7	Swing over gap (mm)	1200	1500	2050
8	Spindle bore (mm)	100	100	125
9	Spindle R.P.M.	25 to 600	20 to 400	15 to 300
10	Spindle speed Nose/range
11	Tail stock sleeve travel (mm)	250	300	300
12	Tail stock ram dia. (mm)	75	100	100
13	Cross slide travel (mm)	450	600	750
14	Main motor H.P./R.P.M.	5 / 1440	7.5 / 960	10 /720
15	Taper in Tailstock RAM	MT - 5	MT - 6	MT – 6
16	Lead screw dia./threads (TPI)	45/2	50/2	50/2