TECH LASER THERAPY SS is a sophisticated Scanning Model laser therapy unit. This machine has Scanning Mode which is extremely useful to treat larger areas such as shoulder and lumbar region without strain for the operator. This machine has advanced controls to treat a selected area of treatment by giving even dose to the complete area of treatment.

Salient Features

·     Visible red Laser at 655nm with output power 24mw.

·     Infrared Laser at 830 nm with output power 120 mw.

·     Scanning mode: Very useful for treating larger areas such as shoulder and lumbar region without strain for the operator.

·     Pulsed and continuous output.

·     Meridian point detector for laser acupuncture.

·     Computerised LCD screen with controls gives messages/information to the user on various adjustments.

·     Automatic electronic treatment timer.

·     Key operated switch prevents unauthorized operation.

·     Mounted on stand and wheels for easy mobility.

          ·     Supplied with protective goggles for the operative as well as for the patient

Technical Specifications:

Visible Red Laser	Solid State 655 NM Wave Length
Power Output	24 mW
Infra Red Laser	Solid State 830 NM Wave Length
Power Output	120mW
Modes	Contineous & Pulsed
Dimension	65 x 210 x 155 (H x D x W) in mm.
Weight	1.26 Kg
Mains Supply	230 V AC /50Hz
Power Consumption	10 Watts
Mains Fuse	0.5 Amps.

 

 

 

 

TECH LASER THERAPY 302

Tech Laser Therapy 302 is a advanced Microprocessor based Laser Therapy Equipment. It will provide top therapeutic efficacy, for your satisfaction and for your patient's comfort.

Tech Laser Therphy 302 is a Portable user-friendly unit with zoomed LCD panel with backlights that displays the TREATMENT TIME and FREQUENCY. It also has an attractive BARGRAPH display and BUZZER INDICTION for acupuncture detection. TECH PORTABLE LASER 302 provides two types of PROBES, VISIBLE RED LASER AND INFRARED LASER.

FEATURES

• Computerised LCD screen with controls gives messages / information to the user on various adjustments.
• Two Probes - Visible Red Probe and Infra Red Probe
• Automatic electronic treatment timer.
• Pulsed and continuous output.
• Frequency 0.6 to 300 Hz
• Moulded ABS Body Portable Table Top

TECHNICAL DATA

Mains supply	230V/AC/50 H/
Power Consumption	15 Watts
Mains fuse	1 Amp
Treat Time	max-99 min
Frequency	0.6 to 300 Hz
Wavelength Infrared	980 nm / 100 mw
Visible Red Laser	655 nm / 20 mw

VECTROSTIM/VECTRODYNE

Vectrodyne is an advanced microprocessor based Interferential therapy unit. It has an LCD screen displaying the current in 2 channels, mode of operation, programme number and treatment time.

Vectrostim is an advanced version of vectrodyne. It is a 3 in one product with IFT + MST + TENS.
 
Vectrodyne has soft touch membrane key board for easy operation.Base and Spectrum frequency variations are clearly displayed through bar graph display. 29 programs on Interferential Therapy and 73 programs on muscle Stimulator makes the Vectrostim truely versatile.

The complete program specifications can be run on the screen with "HELP" Program. Vectrostim is having 45 degrees and 90 degrees vector facility. Automatic intensity control makes Vectrostim very safe to use by avoiding accidental wrong settings of intensity

Vectrostim uses a rugged linear power supply. Compact and light weight makes the unit, PORTABLE , particularly designed to be accommodated in a Brief Case.

Vectrodyne has 29 programmes of Interferential Therapy only.

Technical Specifications:

Output	2 separate outputs channer I & II
Output Current	0-90mA
Output Frequency	Channel 4000Hz-4250 Hz depending on the base  & spectrum control
Interference Frequency	Base – 0 Hz –100 Hz Spectrum – 0 Hz – 150 Hz
Interference Spectrum Indicator	Front panel green BAR GRAPH indicator
Power Supply	230v AC/50 Hz
Power consumption	50 Watts
Dimension (in mm)	100 x 320 x 305
Weight	3.5 KGS
Mains Fuse	0.5 Amps.

 

Electroson 608 is a fully Solid State Ultrasound Therapy Unit. It is a verstatile model, most modern in design, sleek, compact and easy to handle. The continuous and pulsed modes can be easily selected. A Digital power meter indicates the ultrasonic power delivered to the patient in watts / cm²

With the Digital treatment timer, it is easy to set treatment time which switches off the unit automatically after the treatment time is over.
Transducer safety mechanism ensures long life for the crystal by switching off the ultrasonic power when the transducer is kept in its holder and when not in use.


The pulsed mode further has four pulse ratios as given below:

• 1:1 2 msec ON 2 msec OFF
• 1 :4 2 msec ON 8 msec OFF
• 1:7 2 msec ON 14 msec OFF
• 1: 102 msec ON 20 msec OFF

SPECIFICATIONS

Ultrasound nominal frequency	1 Mhz
Ultrasound output	15 Acoustic watts Max.
Ultrasound power density	2.5 Watts / cm2
Mode of operation	Continuous & Pulsed. 0 to 20 minutes electronic timer with digital display. Audio alarm at the end of treatment

ELECTROSON 709

Electroson 709 is an advanced microcontroller based ultrasound therapy equipment. It combines the functions of both 1 MHz & 3 Mhz.A LCD panel and a soft touch membrane keyboard enable the physician to set the parameters easily.

MAIN FEATURES:

• Electroson 709 is a simple, user friendly unit and easy to operate.
• Liquid crystal display with yellowish backlight displays the parameter chosen, the treatment time and the power.Compact and light weight makes the unit Portable.
  
• Electroson 709 has both continuous & pulsed modes of operation
• It has an additional advantage that both 1 MHz and 3 MHz treatment heads can be plugged-in simultaneously and whichever frequency is selected through programme, corresponding indicator is illuminated.

TECHNICAL SPECIFICATION

INPUT DATA
Mains supply	230V/AC/50Hz
Power Consumption	46 watts
Main fuse	1 Amps
FUNCTIONAL DATA
Maximum output	2.5 watts/sq.cm.
Operating Frequency	1 MHz & 3 MHz
Modes of operation	Continuous mode & pulsed mode
Pulse Ratios	1:1, 1:4, 1:7 & 1:10
Treatment Time	0-99 minutes
Alarm	The buzzer alarms when the treatment time counts down to zero
Selection Output	using a user friendly menu oriented instructions and selections through a LCD panel and a compact membrane keyboard

MECHANICAL DATA

Dimension (in mm) : 75 X 260 X 300 (H X D X W)

Weight: 4.2 kg

AUTOTRAC: intermittent traction machine is an accurate and sturdy unit. Improved reliability has been achieved using solid state electronics. The silent motor is smooth, reliable and long lasting.

Direct pulling power of AUTOTRAC is from 5 to 45 kgs. and with doubler upto 90 kgs. Thanks to solid moulded aluminium gear box and high power sturdy motor. The treatment time is electronically controlled and displayed by LED's digitally. At the end of treatment time the alarm comes up, traction stops automatically and releases the patient.


Autotrac incorporates the following patients safety features.

• Patient can switch off the patient safety switch should there be any discomfort.
• The moment the patient operates the patient switch the motor reverses and the cord which is pulling the patient releases automatically.
• Audio and visual alarms are activated and after release the traction will be in the rest mode.
• A The patient safety switch works on 12V D/c system.

STANDARD ACCESSORIES

• Cervical Collar
• Cervical Spreader bar
• Lumbar belt
• Thoracic belt
• Traction Doubler

SPECIFICATIONS

Traction Force	5 to 45 kgs with doubler up to 90 kgs.
Hold time	20, 40, 60, 80 sees.
Rest time	1, 5, 10, 20 sees.
Treatment time	60 mts. with digital display
Alarms	Activated by patient safety switch. At the end of treatment time
Mounting	Table, wall mount or cot mount.
L x B x H	33 x 28 x 29.5 cms
Weight	10 kgs.
Voltage	220V; 50 Cycles AC

HIGHPOWER SHORTWAVE DIATHERMY UNIT- ELECTROWAVE 500

This new elegant Highpower Shortwave Diathermy unit mounted on wheels for easy mobility with Disc and Pad Electrodes is easy to handle and a sturdy equipment. High frequency current at 27.12 MHz. with maximum power output of 500W is produced by Valve generator.

The equipment has seperate indicators and switches for high tension and low tension current. A meter which indicates the peak current in milliampere facilitates easy tuning and operation. The H.T. is switched off automatically after the treatment time is over.

Arms with electrodes: The disc Electrodes are fixed on a flexible multiposition arm. It is easy to adjust the electrodes over the area to be treated on the patient. The angle of the arm and height can also be adjusted.

Pad Electrodes: The unit is supplied with Pad Electrodes also.

Cooling System: A special instrument cooling fan is provided inside the equipment to cool the valve from over-heating. It also enables the equipment to be used continuously on patients.

TECHNICAL SPECIFICATIONS

Max Power Output	500 Watts
Frequency	27.12.MHz
Wave length	11 meters
Power supply	200-240V 50c/s AC

STANDARD ACCESSORIES

• One pair of Pods with coble, felt & cover.
• One line cord with receptacle
• Multiposition arm with set of Disc Electrodes.
• Cable for Disc Electrodes
• Neon Tester with Handle.

ELECTROWAVE 300 is a portable and sturdy equipment. High frequency current at 27.12 MHz with a max. Power output of 300 watts is produced by valve generator.

The equipment has separate indicators and switches for high tension and low tension current. A meter which indicates the peak current in milliampere facilitates easy tuning and operation. The H.T. switches off automatically after the treatment time is over.

Cooling system: The built in cooling fan provides the valve effective air circulation inside the unit which increases the efficiency. Hence more number of patients can be treated continuously.The unit is supplied with one set of condensor pad electrodes of standard size and patient cable.

Service: Servicing was a major consideration in the development of Electrowave 300. Its design and assembly facilitates rapid field repair by qualified personnel.

SPECIFICATION:

Power Output 300 Watts

Frequency 27.12 M.c/s

Wave Length 11 Meters

Power Supply220-240 volts 50c/s A.C.


STANDARD ACCESSORIES:

One pair of pads with cable, felt & cover, (padssize 5" X 7") one line cord with receptacle.

COMPUTERISED MUSCLE STIMULATOR WITH TENS

Microstim Genius is an advanced microprocessor based electro-therapy equipment. It gives 69 programmes for MUSCLE STIMULATION.

LCD panel and a soft touch membrane keyboard enables easy setting of the parameters. The attractive compact case makes it ideal for hospitals, clinics, homes, office and travel.

SPECIAL FEATURES:

• MICROSTIM, Genius is a user friendly unit featuring HELP facility and therefore simple and easy to operate.
• Liquid crystal display with yellowish Backlight displays the parameter chosen, the treatment time and the current in milliamps.
• Compact and light weight makes the unit portable, particularly designed to be accomodated in a briefcase.
• Automatic Intensity control ensures very safe operating environment.
• Microstim Genius is upgradable.
  

TECHNICAL SPECIFICATION

Input Data
Mains Supply	240 V/AC/50 Hz
Power consumption	46 Watts
Main Fuse	1 amps
Weight	3 kgs.

Muscle Stimulator  Functions:

• Plain galvanic Pulsed galvanic Functions (MST)
• Faradic current Surged Faradic Triangular Tens Surged Tens SD-Curve programs.

ACUTENS is a compact advanced microprocessor based 4 chennel TENS with advanced TENS capabilities. This machine has seperate controls for each channel & the output current of each channel is displayed in the LCD. Suitable for hospital & home visit.

Salient Feature

• Seperate controls for each channel.
• Automatic Intensity control for  safe operating environment.
• Digital Timer with buzzer.

Technical Specifications:

Treatment time	20 Minutes
Frequency	1 to 200Hz
Pulse Width	75 to 360 s
Output Current	0 to 60mA
Output Voltage	0 to 100v (Peak to Peak)
Dimension	65 x 210 x 155 (H x D x W) in mm.
Weight	1.26 Kg
Mains Supply	230 V AC /50Hz
Power Consumption	10 Watts
Mains Fuse	0.5 Amps.

Continuous Passive Motion Apparatus

CPM is useful to treat joints of the lower limb after an injury, disease or following surgery. Based on a concept orginated by SALTER IN 1970, this device has varied applications namely treatment of intra-articular fractures, septic arthritis, ligaments tendon healing and also following total joint replacement to ensure a sufficient range of motion.

To prevent stiffening, the joints have to be moved continuously which results in the following:

• Minimise swelling and Pain after operation.
• Ensures faster recovery and shortened hospital stay.
• Prevents extra-articular contractures and adhesions.
  

Ext / Flex Angle indicator at Knee position

• Compact and elegant construction.
• Electronic controls enable all adjustment of angle to be made on the front panel.
• Smooth and Silent movement
• Digital Timer with alarm.
• Patient Safety Switch for stopping & reversing the motion

SPECIFICATION

Treatment Time	0 - 99 minutes
Rest Time	1 to 5 seconds
Angle	Extension 0
Power	230 V /AC / 50Hz ,75 VA

VACUUM ELECTRODE UNIT

VAC 108 is a modular, compact vacuum therapy machine. The unit is light weight and versatile. It simplifies the placement of treatment electrode in electrical therapy. Vectrostim & Vectrodyne can be combined with VAC108 thus eliminating the need to bandage & wrap electrodes which can restrict blood flow & inhibit muscle contraction. In addition, it has tremendous advantage when treating difficult areas such as shoulders, knees & neck which are extremely difficult with bandage wraps.

The unit offers more than just secure placement of electrodes. The suction rate combined with vacuum offers the additional advantage of pulsed massage stimulation.

FEATURES:

• The Vacuum therapy unit is used together with a stimulation current unit.
• The special electrodes adhere to the skin of the patient by suction and transmit the stimulation current.
• Regions of the body which are accessible with difficulty using conventional plate electrode and fixation tape can also be treated.
• Rational and safe, application with vacuum electrodes (no tape, plates or expensive disposbale electrodes required).
• Increases blood How around the area of the electrodes.
• Controllable gentle suction effect, for individual adaptation.
• Also suitable for manual suction wave massage.
• The use of vacuum electrode in the region of varicose veins, venous inflammations etc. is not indicated.

TECHNICAL SPECIFICATION

Mains input	220V / 50 Hz
Power consumption	46 Watts
Main Fuse	1 Amp x 2
Input	Four banana jacks for electrical Input
OutPut	Four pneumatic connector for Electrical & reduced pressure Coupling
Vacuum	0 to 600 m Bar
Pulsation	10 to 60 pulse / min.
Dimension	Height x Length x Depth - 105 x 310 x 300 (in mm)
Weight	8 kg.

ELECTROSURGE 400D - HIGH FREQUENCY 400W ELECTROSURGICAL UNIT

Electrosurge 400D is a high power Surgical Diathermy with most advanced technology using the Modern Microprocessor Control Systems. The complete independent generators produce 400 Watts output for cutting and 90 watts for Bipolar. The output power with 330 kHz of frequency provides "PURE CUT" with less hemostatics, COAGULATION and BLENDED currents. The variation of power is very smooth and linear to meet the surgeon's needs including application in TUR.

Technical Specification:

INPUT Power requirement

Operating Voltage : 230Volt AC +/- 5% 50Hz

Maximum Current : 4 Amp

Output Waveforms:

Monopolar Cut	400 Watts @ 300 ohms 330kHz sinusoid
Monopolar Coag	300 Watts @ 300 ohms 330kHz sinusoid Burst   Width- 16uSec Repetition Rate 32kHz.
Monopolar Blend	300 Watts @ 300 ohms
Bipolar Coagulator	500kHz waveform 90 watts
Dimension	LXBXH = 480X400 X 140 (in mm)
Weight	18kg approx. (including accessories)
Construction	Solid Metal rugged housing, Powder coated casing.
Electric Protection	Isolated Output (BF Type)

ELECTROSURGE 250EB

Solid State Surgical Diathermy Unit

• ELECTROSURGE 250EB Electrosurgical Unit is suitable for any use in the field of minor, major and endoscopic surgery.
• Very good output level and fine regulation of power by MICRO & MACRO Controls makes the unit versatile and useful for a wide range of surgical needs.
• ELECTROSURGE 250EB is equipped with 2 independent generator, one with output of 250W for Monopolar technique and the other with output of 50W for bipolar technique.
• Useful for all general surgeries and Endoscopic Surgery
• Macro/Micro control enables selection of Power output levels.
• Provision for use with hand switch
• Patient Plate Safety circuit monitors continuity of electrical connections
• Highest level of patient safety ensured
• Cut/Coagulation/blend/bipolar are distinctly indicated by separate audio visual signals.
• Electrosurge 250EB can be used for endoscopic polypectomy, the snare is energised by the diathermy with micro currents.
  

 
Technical Specification
INPUT DATA
Input Voltage : 230V AC +/- 5% 50Hz
Input Current :  2 Amps
 

OUTPUT DATA
(In MACRO )
Monopolar CUT    : 170Watts
Monopolar BLEND :100Watts 
Monopolar COAGULATION : 90Watts

(In MICRO)
Monopolar CUT : 70Watts .
Monopolar BLEND : 40Watts .
Monopolar COAGULATION :30Watts
Bipolar out put : 50Watts

(GENERAL DATA )
Cooling    :   No fans required, cooled by natural convection.
Operating Temperature :    0-70 Deq.C.

   

 ELECTROSURGE 50B is a Solid State, reliable simple Bipolar Coagulator with 50 Watts Bipolar Coagulation output. Bipolar output power is variable from 5 watts to 40 watts stepless for gynaecological, neuro or ophthalmic applications.

Salient Features

• Equipped with both visual and audible Alerts..

• Unit is short-circuit resistant.
  
  TECHNICAL SPECIFICATIONS

Bipo  Bipolar output	40W
Dime Dimension	100mm x 320mm x 210mm
Weig Weight	4kgs
Input Voltage	230V AC
Line  Frequency	50Hz
Mai    Mains fuse	1Amps
ppco Power consumption	200W