Telecom Consultants & Construction Co.

Features

• Easy-to-read LCD (Color/Mono) Display
• Dual Channel, Bandwidth : 25MHz to 200MHz per channel
• Rise Time : 1.8nsec to 14nsec.
• Sample Rate (Real-time) 250MS/s & 1GS/s
• Equivalent Sampling up to 50GS/s
• Advanced Triggering on edge, video, pulse
• 20 Automatic Measurements, Manual Cursor Measurement
• Sweep Time : 1nsec to 50s/div
• 10 Waveforms, 10 Setups Storage
• +, -, x, /, Mathematic Functions
• Zoom with Delay Scan
• Built-in FFT
• Built-in USB and RS232 Interface
• Automatic Calibration
• Exclusive Digital Filters, Waveform Recorder & Pass / Fail Features
• Frequency Counter
• Record Length 4K each channel
• USB Host to store waveform on USB drive

New Aplab Digital Storage Oscilloscopes Series D36000 is a high performance Desktop DSO with bandwidth from 25MHz to 200MHz and sampling rates of 250MS/s and 1GS/s (equivalent samplings of 50GS/s). A VGA Color LCD (D36000CA, D36000C) and Mono LCD (D36000MA, D36000M) is used for bright and clear display of the waveforms. Storage is as simple as pressing a button. Trigger offset option allows to view pre/post trigger events. Cursor and automatic measurements greatly simplify the analysis of these events. Built-in USB and RS232 ports provided, upgrades this oscilloscope for communication with a PC or a remote controller. Internal Digital Filters at input facilitates rejection of noise in the signals. The built-in FFT maths function allows simultaneous viewing of waveforms in Time & Frequency domain. The Recorder utility helps to capture, replay and also to store the abnormal waveform and glitches. The feature Pass-Fail compares and detects the abnormal phenomena exceeding a predetermined limits. The Software provided facilitates the use of Data browser to display captured waveforms, data and measurements. You can export the waveform by "BMP Format" and also save the data into TXT or Excel file for analysis and to print using PC. USB Host provided on front panel facilitates to store the waveform in BMP format on Flash Drive.

Features :

• Handheld, Easy to Operate
• Double Wavelength to Choose from
• Dual Wavelength Output through Single Port
• FC Adaptor (ST, SC, FC Optional)
• Highly Stable Output
• Rechargeable Battery
• Low-Batt Indication
• Auto Shut-off to Save Battery Power

DWLS5 Dual Wavelength Laser Source is very much useful in every kind of OFC Networks in the field. Networks such as the LAN (Local Area Network), WAN, Broadband, city area, and CATV networks used for long-distance OFC.

It is well developed to provide the steady light source using the best techniques for laser emission and disposal. Itcan also be used to distinguish fibers, measure the losss in the fiber accurately, check the continuity and helps to evaluate the transfer quality of fiber link transmission using Optical Power Meter (OPM5).

It provides high quality,stable laser source for the field test and also for development work in the laboratory.

Technical Specification

Emitter Type	Fabry-Perot LD.
Calibrated Wavelength	1310 ± 20nm, 1550 ± 20nm.
Spectral Width	< 5nm.
Output Power	> -7dBm.
Stability in Short Time	< ±0.05dB / 15 min.
Stability in Long Time	< ±0.1dB / 8 hr.
Laser Output Mode	CW.
Optical Connector	FC Type Adapter.
Output Working Wave Monitor	LED.
Battery	9V/160mA, Ni-MH rechargeable.
Low Voltage Indication	<7.5V LED indicator.
Low Voltage Shutoff	7.2V.
Battery Charging Time	8 ~ 10 hours.
Battery Working Duration	5 hours.
Working Temperature	0 ~ +50 deg.
Storage Temperature	-40 ~ 70 deg.
Dimension (mm)	160 × 76 × 28.
Weight	0.22 Kg.