Telenet has a wide range of well-designed high-speed and high performance ADSL2+ /VDSL router, supports kinds of network protocols, steady runs preferred by the individual users, the SOHO, and the small enterprise to access the internet. High performance gateway.
Our ADSL2+ /VDSL routers is available in different configuration:
Telenet has a range of broadband router, adding considerable power and flexibility to the network. This broadband router assures continuous connectivity to the network resource and the internet. This high tech equipment allows sharing of broadband access with all the networked computers wirelessly or with Ethernet cables. Enables easy downloading of large files, videoconference, and distribute& play high-quality digital movies, photos, and MP3s with in frictions of seconds.
Our broadband router are available in configuration
Telenet’s ethernet switches provide a new level of flexibility and easy migration between bandwidths. The ethernet switches designed with the latest technology, support non-blocking, wire speed forwarding rate and resolves the head of line blocking problem. Our ethernet switches available in Layer 2 fast Ethernet Layer 3 fast Ethernet, Layer 2 & 3 Gigabit Ethernet, Also Unmanaged Switches & Web Smart switches with configuration 8 port 16 port & 24 Port.
Our ethernet switches are available in following configuration
Managed Switches
8 Port L2 10/100 Fast Ethernet Standalone Switch TSW1008
16 Port L2 10/100 Fast Ethernet Standalone Switch with Gigabit combo Ports TSW 1026XA
48 Port L2 10/100 Fast Ethernet Standalone Switch with 4 Gigabit Combo Ports TSW 1052XA
24 Port L2 10/100 Fast Ethernet Stackable Switch with 2 Gigabit Combo Ports TSW 1026YA
Unmanaged Switches
8 Port 10/100 Fast Ethernet Unmanaged Switch (PVC) TSW 8008P
16 Port 10/100 Fast Ethernet Unmanaged Switch (19" Rack Mountable) TSW 8016
24 Port 10/100 Fast Ethernet Unmanaged Switch (19" Rack Mountable) TSW 8024
Features:
Plug and Play installation with automatic port configuration
Supports sixteen 10/100Mbps auto-sensing and auto-negotiation ports.
Provides non-blocking wire speed forwarding.
Provides 10Mbps, 100Mbps hub and 10/100-switch functionality in one unit.
Boosts network performance.
Easy to view 3 LED level indicators for power and status and diagnostics.
Embedded entries of look up table and entries of CAM.
Telenet’s ISDN devices network termination for basic rate access enables subscribers to use services such as high-speed transmission of data, text and video signals in digital format over an access line in addition to voice transmission. Acting as a main gate to the world of ISDN, this ISDN devices forms a link between the subscriber lines and the user interface to the network.
Our ISDN devices are available in following configuration
ISDN NETWORK TERMINATOR (NT-1) Model No: NTB
ISDN INTELLIGENT NT(NT TA) WITH 2 Analog ports, 1 RS232, 1 USB INTP-DPS
ISDN INTELLIGENT NT(NT TA) WITH 4 Analog ports, 1 USB with PBX functionality INT –DPBX4
Features:
Up to 8 access sockets can be connected to the S/T interface via a 4-wire bus.
Two services like telephony and Data transmission can operate simultaneously.
Data rate of 144 Kbps is available to the customer at the S/T interface.
It has three bus configurations, which have different coverage ranges
Point to Point.
Point-to-Multipoint: Short passive Bus.
Point-to-Multipoint: Extended passive Bus.
Has four operating modes depending on whether transmission is active or inactive and whether the integrated power supply is working or not.
Echo cancellation at the U interface ensures that Data Signals are transmitted bi-directionally.
The interface modules operate in the automatic mode.
The U interface module recovers clock synchronization signal, monitor transmission errors and initiate appropriate reactions.
In the event of a long-term short circuit, the power supply module is auto switched off and resumes operation automatically with only a delay of few seconds.
The design is in compliance with ITU/CCITT/ANSI/ETSI and industry standard 2B1Q line code for the U interface.
It is easy to install at the user’s premises and can be installed in a wall-mounted cabinet or used as a desktop version.
Testing and operation configurations can be adjusted quickly by means of switches and jumpers.
Telenet's ISDN Network Termination for basic rate access is the main gate to the world of ISDN. It enables subscribers to use services such as high-speed transmission of data, text and video signals in digital format over an access line in addition to voice transmission. It is a link between the subscriber line (U Interface) and the user interface to the network (S/T interface). A maximum of 8 terminal units can be connected to the S/T interface.
The digital transmission format used offers the subscriber the possibility of access to two independent Basic
Channels (B Channels) each with 64 Kbit/s and one 16 Kbit/s Signalling Channel (D), to be transmitted. The terminals connected to S/T for any two ISDN services can use both B channels simultaneously. The associated signalling information and various service features are transmitted over the D Channel. This results in a transmission speed of 144 Kbits/s for both transmit and receive direction.
The NT1 is installed at the end of the public transmission line coming from the ISDN switch of the local exchange
and converts the 2-wire duplex U interface into the 4wire double simplex subscriber S/T interface.
Features:
Upto 8 access sockets can be connected to the S/T interface via a 4-wire bus
Two services like telephony and Data transmission can operate simultaneously. Data rate of 144 Kbps is available to the customer at the S/T interface. It has three bus configurations, which have different coverage ranges. i)Point to Point.
ii)Point-to-Multipoint : Short passive bus. iii)Point-to-Multipoint : Extended passive bus.
Has four operating modes depending on whether transmission is active or inactive and whether the integrated power supply is working or not.
Echo cancellation at the U interface ensures that Data Signals are transmitted bidirectionally. The interface modules operate in the automatic mode.
The U interface module recovers clock synchronization signal, monitor transmission errors and initiate appropriate reaction.
In the event of a long-term short circuit, the power supply module is auto switched off and resumes operation automatically with only a delay of few seconds.
The design is in compliance with ITU/CCITT/ANSI/ETSI and industry standard 2B1Q line code for the U interface.
It is easy to install at the user's premises and can be installed in a wall-mounted cabinet or used as a desktop version.
Testing and operation configurations can be adjusted quickly by means of switches and jumpers.
Telenet's ISDN Network Termination for basic rate access is the main gate to the world of ISDN. It enables subscribers to use services such as high-speed transmission of data, text and video signals in digital format over an access line in addition to voice transmission. It is a link between the subscriber line (U Interface) and the user interface to the network (S/T interface). A maximum of 8 terminal units can be connected to the S/T interface.
The digital transmission format used offers the subscriber the possibility of access to two independent Basic
Channels (B Channels) each with 64 Kbit/s and one 16 Kbit/s Signalling Channel (D), to be transmitted. The terminals connected to S/T for any two ISDN services can use both B channels simultaneously. The associated signalling information and various service features are transmitted over the D Channel. This results in a transmission speed of 144 Kbits/s for both transmit and receive direction.
The NT1 is installed at the end of the public transmission line coming from the ISDN switch of the local exchange
and converts the 2-wire duplex U interface into the 4wire double simplex subscriber S/T interface.
Features:
Upto 8 access sockets can be connected to the S/T interface via a 4-wire bus
Two services like telephony and Data transmission can operate simultaneously. Data rate of 144 Kbps is available to the customer at the S/T interface. It has three bus configurations, which have different coverage ranges. i)Point to Point.
Has four operating modes depending on whether transmission is active or inactive and whether the integrated power supply is working or not.
Echo cancellation at the U interface ensures that Data Signals are transmitted bidirectionally. The interface modules operate in the automatic mode.
The U interface module recovers clock synchronization signal, monitor transmission errors and initiate appropriate reaction.
In the event of a long-term short circuit, the power supply module is auto switched off and resumes operation automatically with only a delay of few seconds.
The design is in compliance with ITU/CCITT/ANSI/ETSI and industry standard 2B1Q line code for the U interface.
It is easy to install at the user's premises and can be installed in a wall-mounted cabinet or used as a desktop version.
Testing and operation configurations can be adjusted quickly by means of switches and jumpers.
SDN TA with built in NT The ISDN TA with built in NT is an ISDN network Terminator with 2 a/b ( POTS) ports with serial and USB built in data ports. The data port provides a high speed solution for internet access, File transfers, Remote Access services etc. Support for advanced communication software is provided via CAPI 2.0 drivers. On the Digital port upto 8 devices ( with optional extender ) can be terminated such as video conferencing for 64 or 128 kbps, ISDN Feature Phones, G4 fax etc. Configuration is simple, using an analog telephone or via a GUI utility provided on the data ports. The data ports are provided with drivers for easy of installation. The LED's provided on the front give you the status at a glance also making diagnostics and to provide for ease of maintainence. The ISDN TA with built in NT also supports Network Management Services which are password protected. This helps in knowing the status of the unit also allows remote configuration that saves time required to effect changes in the configuration without the need to visit the customers location. Support for remote firmware upgrade is also included this helps to keep the system updated to the latest features which is very cost effective in the long run. ISDN TA with built in NT is housed in a small sturdy and Aesthetically designed case. Analog port Features
Analog Extension : The ISDN TA with NT provides you with 2 extensions. For connecting fax machines, modems, etc. Supports internal communication while both B Channels are in use.
Configuration Setting: Configuration can be done using standard phone connected to the analog port.
Flexible MSN usage: If you have several MSN then each MSN number can be programmed to ring any combination of extension.
Distinctive Ring : Each MSN number can be programmed for a different Ring tone.
Call pick up : Any extension can be used to answer incoming calls ringing on another extension. Call Transfer: Incoming calls on any extension can be transferred to another extension.
Call waiting: Second incoming call is announced via special tone.
CLIP : Caller ID is presented on all extensions for all incoming calls.
CLIR: Before making a call, choice of deactivating and activating caller ID per call or enabling it permanently.
Call forward: (CFU, CFB, and CFNR) depending on the condition a call can be forwarded to another subscriber.
CCBS: If a called subscriber is busy, on activating this feature you will get a ring the moment the subscriber is free.
TP: An existing call can be suspended and resumed.
3PTY: While engaged in conversation you can have third party joining.
MCID: Telephone number of Malicious caller can be registered at the switch by invoking a command.
Emergency Mode: Choice of Analog or ST ports working in case of local power failure. Other Supplementary Features
Call hold, Hotline, CUG, Keypad Protocol, Global call.
ISDN TA with built in NT The ISDN TA with built in NT is an ISDN network terminator with 2 a/b ( POTS) ports with serial and USB built in data ports. The data port provides a high speed solution for internet access, File transfers, remote access services etc. Support for advanced communication software is provided via CAPI 2.0 drivers. On the Digital port up to 8 devices ( with optional extender ) can be terminated such as video conferencing for 64 or 128 kbps, ISDN Feature Phones, G4 fax etc. Configuration is simple, using an analog telephone or via a GUI utility provided on the data ports. The data ports are provided with drivers for easy of installation. The LED's provided on the front give you the status at a glance also making diagnostics and to provide for ease of maintenance. The ISDN TA with built in NT also supports Network Management Services which are password protected. This helps in knowing the status of the unit also allows remote configuration that saves time required to effect changes in the configuration without the need to visit the customers location. Support for remote firmware upgrade is also included this helps to keep the system updated to the latest features which is very cost effective in the long run. ISDN TA with built in NT is housed in a small sturdy and Aesthetically designed case. Analog port Features
Analog Extension : The ISDN TA with NT provides you with 2 extensions. For connecting fax machines, modems, etc. Supports internal communication while both B Channels are in use.
Configuration Setting: Configuration can be done using standard phone connected to the analog port.
Flexible MSN usage: If you have several MSN then each MSN number can be programmed to ring any combination of extension.
Distinctive Ring : Each MSN number can be programmed for a different Ring tone.
Call pick up : Any extension can be used to answer incoming calls ringing on another extension. Call Transfer: Incoming calls on any extension can be transferred to another extension.
Call waiting: Second incoming call is announced via special tone.
CLIP : Caller ID is presented on all extensions for all incoming calls.
CLIR: Before making a call, choice of deactivating and activating caller ID per call or enabling it permanently.
Call forward: (CFU, CFB, and CFNR) depending on the condition a call can be forwarded to another subscriber.
CCBS: If a called subscriber is busy, on activating this feature you will get a ring the moment the subscriber is free.
TP: An existing call can be suspended and resumed.
3PTY: While engaged in conversation you can have third party joining.
MCID: Telephone number of Malicious caller can be registered at the switch by invoking a command.
Emergency Mode: Choice of Analog or ST ports working in case of local power failure. Other Supplementary Features
Call hold, Hotline, CUG, Keypad Protocol, Global call.
ISDN TA with built in NT The ISDN TA with built in NT is an ISDN network terminator with 2 a/b ( POTS) ports with serial and USB built in data ports. The data port provides a high speed solution for internet access, File transfers, Remote Access services etc. Support for advanced communication software is provided via CAPI 2.0 drivers. On the Digital port up to 8 devices ( with optional extender ) can be terminated such as video conferencing for 64 or 128 kbps, ISDN Feature Phones, G4 fax etc. Configuration is simple, using an analog telephone or via a GUI utility provided on the data ports. The data ports are provided with drivers for easy of installation. The LED's provided on the front give you the status at a glance also making diagnostics and to provide for ease of maintenance. The ISDN TA with built in NT also supports Network Management Services which are password protected. This helps in knowing the status of the unit also allows remote configuration that saves time required to effect changes in the configuration without the need to visit the customers location. Support for remote firmware upgrade is also included this helps to keep the system updated to the latest features which is very cost effective in the long run. ISDN TA with built in NT is housed in a small sturdy and Aesthetically designed case. Analog port Features
Analog Extension : The ISDN TA with NT provides you with 2 extensions. For connecting fax machines, modems, etc. Supports internal communication while both B Channels are in use.
Configuration Setting: Configuration can be done using standard phone connected to the analog port.
Flexible MSN usage: If you have several MSN then each MSN number can be programmed to ring any combination of extension.
Distinctive Ring : Each MSN number can be programmed for a different Ring tone.
Call pick up : Any extension can be used to answer incoming calls ringing on another extension. Call Transfer: Incoming calls on any extension can be transferred to another extension.
Call waiting: Second incoming call is announced via special tone.
CLIP : Caller ID is presented on all extensions for all incoming calls.
CLIR: Before making a call, choice of deactivating and activating caller ID per call or enabling it permanently.
Call forward: (CFU, CFB, and CFNR) depending on the condition a call can be forwarded to another subscriber.
CCBS: If a called subscriber is busy, on activating this feature you will get a ring the moment the subscriber is free.
TP: An existing call can be suspended and resumed.
3PTY: While engaged in conversation you can have third party joining.
MCID: Telephone number of Malicious caller can be registered at the switch by invoking a command.
Emergency Mode: Choice of Analog or ST ports working in case of local power failure. Other Supplementary Features
Call hold, Hotline, CUG, Keypad Protocol, Global call.
ISDN TA with built in NT The ISDN TA with built in NT is an ISDN network terminator with 2 a/b ( POTS) ports with serial and USB built in data ports. The data port provides a high speed solution for internet access, File transfers, remote access services etc. Support for advanced communication software is provided via CAPI 2.0 drivers. On the Digital port up to 8 devices ( with optional extender ) can be terminated such as video conferencing for 64 or 128 kbps, ISDN Feature Phones, G4 fax etc. Configuration is simple, using an analog telephone or via a GUI utility provided on the data ports. The data ports are provided with drivers for easy of installation. The LED's provided on the front give you the status at a glance also making diagnostics and to provide for ease of maintenance. The ISDN TA with built in NT also supports Network Management Services which are password protected. This helps in knowing the status of the unit also allows remote configuration that saves time required to effect changes in the configuration without the need to visit the customers location. Support for remote firmware upgrade is also included this helps to keep the system updated to the latest features which is very cost effective in the long run. ISDN TA with built in NT is housed in a small sturdy and Aesthetically designed case. Analog port Features
Analog Extension : The ISDN TA with NT provides you with 2 extensions. For connecting fax machines, modems, etc. Supports internal communication while both B Channels are in use.
Configuration Setting: Configuration can be done using standard phone connected to the analog port.
Flexible MSN usage: If you have several MSN then each MSN number can be programmed to ring any combination of extension.
Distinctive Ring : Each MSN number can be programmed for a different Ring tone.
Call pick up : Any extension can be used to answer incoming calls ringing on another extension. Call Transfer: Incoming calls on any extension can be transferred to another extension.
Call waiting: Second incoming call is announced via special tone.
CLIP : Caller ID is presented on all extensions for all incoming calls.
CLIR: Before making a call, choice of deactivating and activating caller ID per call or enabling it permanently.
Call forward: (CFU, CFB, and CFNR) depending on the condition a call can be forwarded to another subscriber.
CCBS: If a called subscriber is busy, on activating this feature you will get a ring the moment the subscriber is free.
TP: An existing call can be suspended and resumed.
3PTY: While engaged in conversation you can have third party joining.
MCID: Telephone number of Malicious caller can be registered at the switch by invoking a command.
Emergency Mode: Choice of Analog or ST ports working in case of local power failure. Other Supplementary Features
Call hold, Hotline, CUG, Keypad Protocol, Global call.
ISDN TA with built in NT The ISDN TA with built in NT is an ISDN network terminator with 2 a/b ( POTS) ports with serial and USB built in data ports. The data port provides a high speed solution for internet access, File transfers, remote access services etc. Support for advanced communication software is provided via CAPI 2.0 drivers. On the Digital port up to 8 devices ( with optional extender ) can be terminated such as video conferencing for 64 or 128 kbps, ISDN Feature Phones, G4 fax etc. Configuration is simple, using an analog telephone or via a GUI utility provided on the data ports. The data ports are provided with drivers for easy of installation. The LED's provided on the front give you the status at a glance also making diagnostics and to provide for ease of maintenance. The ISDN TA with built in NT also supports Network Management Services which are password protected. This helps in knowing the status of the unit also allows remote configuration that saves time required to effect changes in the configuration without the need to visit the customers location. Support for remote firmware upgrade is also included this helps to keep the system updated to the latest features which is very cost effective in the long run. ISDN TA with built in NT is housed in a small sturdy and Aesthetically designed case. Analog port Features
Analog Extension : The ISDN TA with NT provides you with 2 extensions. For connecting fax machines, modems, etc. Supports internal communication while both B Channels are in use.
Configuration Setting: Configuration can be done using standard phone connected to the analog port.
Flexible MSN usage: If you have several MSN then each MSN number can be programmed to ring any combination of extension.
Distinctive Ring : Each MSN number can be programmed for a different Ring tone.
Call pick up : Any extension can be used to answer incoming calls ringing on another extension. Call Transfer: Incoming calls on any extension can be transferred to another extension.
Call waiting: Second incoming call is announced via special tone.
CLIP : Caller ID is presented on all extensions for all incoming calls.
CLIR: Before making a call, choice of deactivating and activating caller ID per call or enabling it permanently.
Call forward: (CFU, CFB, and CFNR) depending on the condition a call can be forwarded to another subscriber.
CCBS: If a called subscriber is busy, on activating this feature you will get a ring the moment the subscriber is free.
TP: An existing call can be suspended and resumed.
3PTY: While engaged in conversation you can have third party joining.
MCID: Telephone number of Malicious caller can be registered at the switch by invoking a command.
Emergency Mode: Choice of Analog or ST ports working in case of local power failure. Other Supplementary Features
Call hold, Hotline, CUG, Keypad Protocol, Global call.
Telenet’s midspan POE is a power over ethernet (PoE) power supply with integral DC Injector. It provides DC power for one power over ethernet equipped device by "Injecting" DC power through the CAT5 (10/100Mbps) Ethernet cable on the data pair itself. Since our power over ethernet device is completely self-contained, a separate power supply and injector is not required
Electrical Specifications
Ethernet Connectors RJ45 Jacks (2)
Ethernet Data Rate 10/100Mbps Ethernet
Ethernet Devices that can be powered Single Pair 1: Pins1/2
Data Lines Pair 2 : Pins 3/6 VDC: Pins ½ or Pins 4/5
Cat-5 Power (PoE) Pinout –VDC: Pins 3/6 or Pins 7/8
Operating Temperature 0° C to 70° C
Power Supply 48VDC @15.4W
Max Output Current 0.35A
Input 100-250 VAC 50H~
IEEE Compliant Single IEEE 802.3af Compliant
Applications For The Telenet Power Over Ethernet
Wireless LAN Access Points and Bridges
Wireless LAN WiFi Amplifiers and Amplified Antennas
Telenet’s protocol converter is a high performance, remote, self-learning Ethernet Bridge. Protocol converter compact size and low cost make it ideal for cost-sensitive bridging applications.
Our protocol converter are available in following configuration
E1 to Ethernet Converter TPC 3010
E1 to V.35 PROTOCOL Converter TPC3020
4E1 to Ethernet Protocol Converter TPC 3140
8E1 to Ethernet Protocol Converter TPC 3180
FX Ethernet to 4 E1 Converter TPC 3140
FX Ethernet to 4 E1 Converter TPC 3180
TDMoIP-4E TPC 3340
G.703 to Ethernet TPC 3410
Features:
E1 channel: both framed & unframed are OK, both 75 & 120ohm are OK
Standard: G.703, line code: HDB3
Alarm system for E1 loss
Support local/remote loop test
DB25 connector for V.35, in DCE mode
Multiple clock selection: internal clock, V.35 line clock and E1 recovery clock
Panel instruction for easy understanding of equipment working status
Internal power supply, 220V AC and -48V DC optional
Standalone and module at your selection
Realize transparent transfer Ethernet data in 1 to 8 E1 channels
10/100Base-FX, full/half duplex self adapt, support VLAN.
10/100Base-FX support SC/FC to choice and 1550nm single mode / 850 nm Multimode to choice (For Fiber Model).
10/100Base-FX support IEEE 802.3 standard and 802.3U fast Ethernet standard (For Fiber Model).
E1 port support 120Ù and physical port using RJ45.
Setting CRC alarm limitation to auto isolate lines with low transfer quality, single direction. When one direction error
Rate over limitation, disconnect only one direction, the other is not affected. Unbalance in two directions.
Allow 8 E1 channels up to 10ms transfer delay. When the delay over the limitation, can stop transfer automatically.
Support Dynamic Ethernet MAC address (4096), having local address filter function.
E1 interface compatible with ITU-T G.703, and G.823. Signaling slot not supported.
E1 interface having internal clock resume circuit and HDB3 codec circuit.
Support E1 channel hot plug, and auto detect available E1 channels not pause the transmission.
supporting 1 to 8 E1 channels customized configuration, auto detect the number of E1 channels and select the available
Voice over internet protocol IP Phone is a revolutionary IP terminal for modern enterprises and residential. With sophisticated design. Voice over internet protocol can support versatile features. High performance and outstanding capability. But most attractive point is exquisite design and unbeatable price. With a full range of interoperability tests, voice over internet protocol is extremely compatible with a variety of soft switch. However, it will be the best competitive products for the general application from home, SOHO, SME and up to enterprises. Also Voip Gateway is an inexpensive, easy-to-install and simple to use.
Our voice over internet protocol are available in following configuration
1 LAN, 1WAN, 2 FXS TVP 7020
1 LAN, 1WAN, 1 FXS, 1 Lifeline Gateway TVP 7030
Features:
Most VoIP and networking protocols support
User-friendly interface and exquisite design
Good interoperability for IP Centrex, IPPBX and Soft switches
Support good voice quality and storm attacking protection
Auto-provisioning, management and security enhancement
Rich supplementary call services and phone features
Unimech Weldtech Private Limited Engaged in manufacture and supply of welding cables, aluminum welding cables, electrical cables, copper welding cables and industrial welding cables. Also deals in air plasma, dc inverter machine, mig welding machine, tig welding machine.
Processing...
