Scientific & Laboratory Instruments

We are a well-known manufacturer of Walk in Chamber, which comprises light weight sandwich panel with PUF insulation for easy installation. The equipment is reckoned for safety and has double wall structure supported by backside triple wall. Our equipment is equipped with additional safety digital controller to cut-off dry heater & wet heater supply if temperature limit exceeds. On the same line, float switch cuts off the wet heater supply if water level in the boiler tank reaches critical level.

Features:

• Insulation: 3” Thick PUF Insulation
• Two Blowers
• Blower Motor: 1/6 HP, TEFC with starter, F-class insulation, single phase, 1440 RPM & 230 Volts
• Air circulation: Motorized blower at back side of the chamber recirculates air to maintain maximum uniformity of Temperature & Humidity within the chamber
• Audio & Visual alarm
• Humidity: Steam injection system with water level arrangement
• A low pressure boiler & reservoir tanks dully argon welded with float valve
• Heating System: SS tubular heater made of Nichrome wire sheathed in SS tube is placed in such a way that stored samples do not face radiations
• Heater connected through PTEE coated cable
• Heating elements are ISI marked
• Refrigeration: An Eco-friendly CFC Free hermetically sealed Emerson Copeland refrigerant
• Control Conditions (As per ICH guidelines, in degrees):

• At 25 : RH = 60%

• At 30 : RH = 65%

• At 40 : RH = 75%

Application Areas:

• Stability Testing: For information generation to enhance shelf life of drug substances and adequate storage. Stability data is required as per regulations for licensing approval.
• Electrical and Electronics sectors for testing components
• Testing cement, batteries, cigarettes and material requiring controlled temperature and humidity
• Packing sector
• Botany, Cytology, Plant and Animal breeding

We offer quality Stability Chamber, which is developed in accordance with ICH guidelines and norms of cGMP. The equipment is extensively used in stability testing applications pertaining to the shelf life of drug substances and storage conditions. Our equipment is installed with a motorized blower at back side of the chamber to maintain uniform temperature & humidity condition within the chamber. Additionally, the consistent air flow assures quick recovery after door openings.

Features:

• Control Conditions (As per ICH guidelines, in degrees):

  • At 25 : RH = 60%

  • At 30 : RH = 65%

  • At 40 : RH = 75%

• Construction: Double walled with backside triple
• Insulation: 3” Thick PUF Insulation with humidity & reduced energy consumption for temperature stability
• Blower Motor: 1/12 HP, TEFC , F-class insulation, Single phase, 1440 RPM, 230 Volts
• Heating System: U shape S.S. tubular heaters for better heating
• Humidity System (water level arrangement): Steam injection system (Non condensing type) & reservoir tank with with indicator
• Cooling: An eco-friendly CFC free hermetically sealed Emerson Copeland compressor with R 134A for safeguarding and cooling of compressor system
• Additional Safety thermostat to cut-off dry heater supply in case temperature overshoots
• Float switch cuts off the wet heater supply in case of low water level in the boiler tank reaches critical level
• In-built over load protector for hermetically sealed compressor
• Audio & Visual alarm.
• Compressor ON delay timer (2 min.) to safe guard the compressor

We bring forth for the clients precisely engineered range of Lab Refrigerators, which has double walled construction with backside triple. The cooling in compressor is done by an Eco-friendly CFC free hermetically sealed Emerson Copeland with R 134 A. Furthermore, 2” thick PUF insulation ensures energy efficiency and stable temperature.

Features:

• Air Circulation:

  • Motorized blower at back side of the chamber to maintain uniform temperature condition

  • Air flow for quick recovery after door openings

• Glass door with gasket to observe sample inside the chamber
• Lighting: Interior illumination for working area
• Safety audio visual alarms for temperature overshoot & undershoot
• Compressor ON delay timer (2 min.) to safe guard the compressor
• Trays: Specially designed stainless steel rod trays ensure uniform temperature distribution
• Power Supply: 230V AC, Single Phase, 50Hz
• Control System: Microprocessor based temperature controller cum indicator with dual display of set value & process value for precise temperature control

Specifications:

We are a reckoned manufacturer of Deep Freezers(-20), which are offered with a 3” Thick PUF insulation for temperature stability and low energy consumption. One of the most distinguished component of these freezers are specially designed stainless steel rod trays that distribute temperature evenly.

Features:

Models Available:

Our clients can avail from us Deep Freezer(-40), which can be availed in various capacities. The double walled freezer is equipped with a 4” thick PUF insulation for temperature stability & reduced energy consumption. Furthermore, an observation door made of glass with gasket is offered for sample observation.

Features:

Models Available:

We are a reckoned manufacturer of premier quality Cryo Bath, which is offered in a double wall construction. To avoid leakages, it is provided with one piece inner SS argon welded pot. The equipment comprises a 2” thick heavy insulation to ensure temperature stability & reduce energy consumption. Owing to compact table top design and additional features such as circulation pump for drainage, the equipment is highly demanded in the market.

Other features:

• Circulation pump for better uniform temperature instead of stirrer.
• Side mounted circulating pump 15 ltr. /min capacity
• Power supply: single phase, 230 Volts
• S.S. Tubular heater (water immersion type) for even heat distribution
• Top mounted removable lid

Models Available:

We bring forth for our clients Bod Incubators, which are highly demanded in the market. The incubator is armed with 2” thick PUF insulation for temperature stability & reduced energy consumption. Owing to exceptional functional features, the Bod Incubator is highly demanded in the market.

Salient Features:

Specifications:

• Standard Model: Inside S.S. 304 mirror finish & Outer Mild steel (CRCA) sheet with powder coated
• GMP: Inside S.S. 316 mirror finish & Outer S.S. 304 with dull smooth buff finish
• Temperature range: 5 Degree to 60 Degree
• Temperature accuracy: ± 0.5 Degrees

With the support of our team, we bring forth an optimum quality Bacteriological Incubator. Manufactured under quality bound process, these incubators are reliable to be used in various applications. These are appreciated for efficient working, easy & precise operations and durability. Apart from standard incubators, our clients can avail customized equipment at industry leading prices.

We put forth precision-engineered Shaker Incubators, which are offered in an orbital shaking mode. Designed and developed as per international quality norms and guidelines, the equipment is acknowledged for performance, convenient operations and reliability. It is unmatched in quality and has low maintenance requirements.

Our clients can avail the following models from us:

Features:

Leveraging on our expertise, we offer premier quality Lab Oven (Natural Convection) for the clients. The double walled oven is offered with 3” high-grade glass wool insulation. Herein, heating elements are made using best quality Kanthal DSD wires that are used on refractory supports. There are two standard models available:

• Inside S.S. 304 mirror finish & outer Mild steel (CRCA) sheet with powder coated
• Inside Mild steel (CRCA) with heat resistant aluminum paint & outer Mild steel (CRCA) sheet with powder coated

Features:

Specifications:

Models Available:

We are counted among leading manufacturers and suppliers of Lab Drying Ovens (250 Deg.C), which can be availed in varied capacities. The double walled ovens are insulated with 3” high-grade glass wool. Furthermore, the oven have safety provisions such as safety cum stand by thermostat to cut off the heater supply in case temperature overshoots.

Features:

Models Available:

Our clients can avail from us premier quality Industrial Oven, which is highly demanded in the market. We make use of A-grade material and components to ensure better performance and trouble-free functioning of these ovens. Offered in various specifications, these ovens are robust and have low maintenance requirements. 

We offer optimum quality Vacuum Oven, which is manufactured using stainless steel (SS 304) from inside. Epoxy powder coated outer body is manufactured using thick gauge mild steel (CRCA) sheet. Heaters are mounted outside the chamber to consume working chamber energy, which in turn helps in achieving required temperature level.

Salient Features:

Specifications:

We offer premier quality Multi-cell Ageing Oven/ Electrically Heated Solid Aluminum Block Oven, wherein temperature is controlled precisely within ±1°C by digital controller cum indicator. To minimize the overshoot and undershooting of temperature, an energy regulator and three heat control are provided.

Specifications &:

• Number of cells: 7 / 19 cells
• Dimensions: 75mm dia x 305 mm height
• Temperature Range : 5°C above ambient to 150°C
• Temperature Control : By Digital Controller cum indicator
• Temperature Accuracy : ±1°C within the cell
• Temperature Variation : ±1°C cell to cell
• Wattage Max. : 3 / 6 KW
• Supply voltage : 240V AC Single Phase

Features

• Extraction of air through a small diaphragm pump and preheated to the ageing temperature is forced into each cell from the bottom
• Even air circulation throughout the cells
• A safety thermostat for temperature control if digital controller cum indicator fails to operate
• Convenient placement of switches and controls on the bottom stand
• Regulation of air flow through a rota-meter
• Excellent battery back-up
• Castor wheels are provided for easy mobility
• Additional Features:

1.  

   1. Three heat control: Three heat switches / two tumbler switches

   2. Energy Regulator: Adequate adjustment of the temperature

We bring forth for the clients Muffle Furnace (TEMPO), which finds extensive application in laboratory and industrial applications. The precision-engineered equipment is used for conducting engineering tests of soils and aggregates, cement, ashing organic and inorganic samples, gravimetric analysis, ignition and more. We have set up an advanced testing facility at our premises that allows to supply defect-free products to the clients.

Features:

• Standard Model: Inner chamber made of ceramic pot, outer made of thick gauge mild steel sheet painted with Grey Hammertone paint

• GMP Model: Inner chamber made of ceramic pot and outer made of thick gauge SS 304

• Temperature Control System: Microprocessor based auto tuned PID controller with CE mark & dual display of set value & process value

• Insulation: Heating element wrapped with high-grade cerewool blanket and the gaps are filled with glass wool to avoid heat loss

• Heating System: Heating element of nichrome is wound on the muffle for 930°C and Kanthal (A-1) wire is wound on the Muffle for 1200°C

• Power Supply: 230V AC, Single Phase, 50Hz

• Optional Features

  • Safety digital temperature controller to cut off the supply in case of overshoot of temperature & give audio visual alarm

  • Data logger used for interfacing RS 485 compatible PID controller for storing data at required interval for printing and / or send to PC for maintaining data record

  • CFR 21 Part 11 compliance window based communication software for data management. Complete with RS 485 multi dropping monitor 8 chambers to one software

• Safety features:

  • Energy regulator to control heating elements for extra heating and safety of equipment.

  • Thermal Fuse

Models Available:

Our clients can avail from us a thick gauge mild steel (MS) body Hot Plate, which is highly demanded in the market. Hot plate is equipped with a thick, well machined and smooth cast iron top, which is grooved from the bottom to circulate spiral heaters. Herein, the heating element is housed into the grooves with porcelain beads underneath of the cast iron.

Other Features:

• Maximum surface Temperature 300 Deg.C.
• Excellent corrosion-resistance
• Long serving life

We are an acknowledged manufacturer of Autoclave, which is highly demanded in the market. Autoclave is formed into foot lifting arrangement, wherein the basket of stainless steel water bath(SS) rod wire mesh is used. The double walled Autoclave has a single chamber for steam & water.

Features & Specifications:

We offer premier quality Water Bath, which has accuracy of up to ± 0.5°C. Our clients can avail the premier quality equipment without racks, thermometer & lid. The equipment is ideally used for temperature, ranging from 5°C to 60°C. We can also supply water bath in customized specifications.

Models Available:

Accessories Offered:

With the support of our team, we offer optimum quality Constant Temperature Bath. To prevent leakages, it is provided with double wall construction with inner SS argon welded one piece pot. Moreover, a circulation pump is provided instead of stirrer for better uniformity of temperature.

Features & Specifications:

Our clients can avail from us Water Still (Automatic), which comprises pyrogen free distilled water, boiling chamber and condenser that is made of stainless steel. Highly efficient, these products are unmatched in quality and are offered in various specifications. We offer our products at industry leading prices.

Standard Specifications:

Our clients can avail from us premiere quality All Glass Water Still, which is fully -automatic in operations. Manufactured under quality bound process, the equipment is highly reliable to be used in various applications. Furthermore, we offer indication lamps for each operation. Features include alarm at breakdown and free of cost heating element .

Equipment of standard capacities:

We put forth for our clients Heating Mantles, which are used for heating / boiling solutions in round bottom flasks. Herein, the heating cords are stitched in glass yarn knitted cloth that acts as good electrical insulator, and dissipates the heat very effectively. Our clients can avail Heating Mantles in varied capacities at industry leading prices.

Features & Specifications:

• Maximum surface temperature 400oC

• Armed with temperature controller energy regulator and pilot lamp

• Models Flask Size Rating:

  • TI-66RA 50 – 250 ml. 120 W

  • TI-66RB 100 ml – 500 ml. 160 W

  • TI-66RC 250 ml – 1000 ml. 300 W

  • TI-66RD 500 ml – 3000 ml. 2 x 250 W

  • TI-66RE 1 Liters – 5 Liters 2 x 300 W

We are well-known manufacturer of Soxhlet Extraction Apparatus, which are widely used in laboratories for solvent extraction under reflux. These can also be used in application to determine residual oil content in oil cake, assay of crude herbal drug sources. Ideal to heat Soxhlet flasks of 100-350 ml capacity, the apparatus is appreciated for construction, reliability and durability.

Features:

• Heating element attached to knitted fabric for flask support
• Gap between the metal casing and the heater is filled using glass wool
• solvent escapes through the draining hole below each element or evaporate in case of spillage
• Extraction apparatus is fixed on housing having two retort rods and a cross bar
• In-built energy regulator for controlling all the heaters
• Heating elements with separate ON/OFF switches for convenience
• Pilot lamp for indication of working status
• Power: 240V AC, Single Phase supply