logoIndore, Madhya Pradesh(Verified Supplier)
Call Us:
Products & Services

Scientific And Laboratory Instruments

Line Impedance Testers

Line%20Impedance%20Testers

We are engaged in offering a wide assortment of Line Impedance (k-Factor Measurement Set) CP C U1 to the clients. These products are available at industry leading prices and are known for the high-efficiency, low-cost maintenance and easy operation features. We are majorly looking for queries from Madhya Pradesh, Chhattisgarh, Rajasthan, Orrisa & Uttar Pardesh.

 

Technical Specifications:


  • Another accessory for the CPC 100, the CU1 is a unique measurement system for testing overhead lines
  • High-voltage cables determine important and sensitive parameters for the setting of protection, such as the line impedance (Z), line angle (j), k-Factor (k0) and mutual coupling
  • The non-mains frequency quantities give effective suppression of mains-related interference

Current Transformer Test Set

Current%20Transformer%20Test%20Set

We are engaged in offering CT Analyzer - Current Transformer Test Set  to the clients, which is ideal for CT testing and calibration. This product follows a specific low-frequency method that facilitates the testing of knee-points of up to 15kV. Our CT analyzers are fabricated in accordance to defined industry standards IEC 60044-1,IEC 60044-6 and IEEE C57.13-1999 and enable user is test Class X and Class P CTs, TPX, TPY and TPZ. This product also sets the accuracy limiting factor like 5P20 or the class, such as 0.1 FS10 and does not need rewiring during the analysis process. We are majorly looking for queries from Madhya Pradesh, Chhattisgarh, Rajasthan, Orrisa & Uttar Pardesh.

Some features are given below:

 

  • Lightweight (8kg)
  • Checked on entire parameters like ratio, phase error, accuracy/class, winding resistance, excitation curve and knee-points
  • It gives an accuracy of 0.02% for ratio and phase displacement and permits the analysis and calibration of metering CTs up to class 0.1

Sweep Frequency Response Analyzer

Sweep%20Frequency%20Response%20Analyzer

The Sweep Frequency Response Analyzers offered by us are manufactured in accordance with SFRA principal. Owing to this, these products are able to evaluate the condition of the windings, core and internal structure of power transformers. Our light in weight products are integrated with new-wave connection technique, which is ideal for reliability and repeatability. Moreover, the user-friendly software also facilitates the user with integrated expert knowledge that is ideal for evaluation and analysis of the test results. We are majorly looking for queries from Madhya Pradesh, Chhattisgarh, Rajasthan, Orrisa & Uttar Pardesh.

Moisture Measurement In Transformers

Moisture%20Measurement%20in%20Transformers

We are engaged in offering a broad assortment of Moisture Measurement in Transformers (DIRANA) to the clients. This product is able to test the water content of the solid insulation (paper, press-board), that accommodates the water in transformer (typically 200 times more than is found in the oil). Moreover, it is designed with dielectric response method that automatically measures the water content of the transformer. Owing to this innovative technique, this product delivers valuable crucial details on the insulation integrity. Our product prevents the penetration of moisture into the oil/paper insulation of power transformers, which in turn mitigates its dielectric withstand strength and accelerates the aging of the cellulose. We are majorly looking for queries from Madhya Pradesh, Chhattisgarh, Rajasthan, Orrisa & Uttar Pardesh.

Product Code: DIRANA

Partial Discharge Testing

Partial%20Discharge%20Testing

Our organization is engrossed in offering a wide range of products that helps in conducting Partial Discharge Testing (MPD 600), Our products conform to the IEC 60270 standards. The products are available with three channels, which simultaneously measure to localize and separate the PD sources. Moreover, these products (MPD 600) are digital real-time filters that are ideal for multi-channel synchronous PD measurement and for excellent noise suppression, PD separation and localization. We are majorly looking for queries from Madhya Pradesh, Chhattisgarh, Rajasthan, Orrisa & Uttar Pardesh.

Some of the product specification are given below:

 

  • Ideal for High accuracy that make sure the low operational noise
  • The inbuilt software 3PARD and 3CFRD make it able to analyses the results skillfully.
  • The three phase testing can be done with PD testing cables for generators or transformers.

Product Code: MPD-600

Syscompact 3000 Cable Fault Locator

Syscompact%203000%20Cable%20Fault%20locator

We are engaged in offering a user-friendly gamut of Syscompact 3000 to the clients. It is integrated with fault location method that provides trusted fault location. This product is manufactured using high-grade raw material, which is fitted with in-built cable fault location system that facilitates high & low impedance and intermittent cable faults of low and medium voltage cables for prelocation and pin pointing. Moreover, we have made this assortment of products available with generators SSG 1100, 1500 or 2100 with an option of SSG 500 integration. Furthermore, the precisely designed equipment facilitates hassle-free transport and installation with a payload of 300 to 500 kg in every van. We are majorly looking for queries from Madhya Pradesh, Chhattisgarh, Rajasthan, Orrisa & Uttar Pardesh.

Portable VLF Test Set

Portable%20VLF%20Test%20Set

Our organization is engaged in offering a wide assortment of Frida to the clients, which is known for small, compact, light and easy operation in fields. We have procured these products from the esteemed vendors of the domain and are reckoned for their simple to use controls and durability. We are majorly looking for queries from Madhya Pradesh, Chhattisgarh, Rajasthan, Orrisa & Uttar Pardesh.

 

Specifications:

 

  •  For medium-voltage cables up to 15 kV
  •  VLF truesinus ® at an affordable price
  •  Automatic frequency variation (0.01 - 0.1 Hz)
  •  Automatic frequency variation (0.01 - 0.1 Hz)
  • Latest testing technology VLF tru• esinus®
  •  Testing of cables and electrical equipment up to 15 kV
  • • Cable sheath testing/sheath fault location
  •  VLF truesinus®, VLF square wave and DC in one device
  •  Test voltage up to 23 kVrms truesinus® = 34kVpeak 30 kV square wave and 30 kV DC
  •  Fastest possible breakdown of defective areas

 

Product Code: Frida

Fully Automatic Cable Sheath Testing

Fully%20Automatic%20Cable%20Sheath%20Testing

We are engaged in trading Shirla that is also known as Fully Automatic Cable Sheath Testing and Fault Location System. Provided with the integrated high voltage DC source, this instrument can pre-locate low and high resistive cable faults with ease. On the request of the clients, we can offer this product in far-flung markets at competitive prices. We are majorly looking for queries from Madhya Pradesh, Chhattisgarh, Rajasthan, Orrisa & Uttar Pardesh.

 

Technical Specifications:

 

  • Measuring principle supports the prelocation of earth faults and cable sheath faults on unshielded cables
  • Special measuring bridge
  • Performs measurements in accordance with the Murray and Glaser methods
  • Used for fault prelocation, cable sheath testing and sheath fault pin pointing as per step voltage method
  • Automatic analyses with digital display of results
  • By using the KMF1 or UL receiver set step voltage can be picked up
  • According to the step voltage method, it applies a defined DC pulse pattern for cable fault pin pointing 

Baur Oil Tester

Baur%20Oil%20Tester

We are engaged in offering a wide assortment of BAUR oil tester (DPA 100 C) that measures the electrical breakdown strength of insulating liquids fully automatically. This instrument evaluates the degree of impurity in insulating oils due to foreign particles, gas and water. Moreover, these products are available at industry leading prices for our clients. We are majorly looking for queries from Madhya Pradesh, Chhattisgarh, Rajasthan, Orrisa & Uttar Pardesh.

 

Technical Specifications:


  • It meets current regulations & economically useful to protect electrical systems such as transformers and switches, as well as medical and security systems from breakdowns
  • The main reason for such damage is the poor condition of the insulating oil
  • Fully automatic measurement of the dielectric strength of liquid
  • Insulations up to 100kV
  • Excellent design for high efficiency and usability
  • Extraordinarily powerful for continuous use in the laboratory
  • Clear and reliable results through the latest measurement technology
  • Repeatable breakdown measurement in mineral oil, silicone and ..ester fluids
  • Switch-off time below 10µs for reliable measurement results through multiple measurements
  • Clear breakdown detection with a new measurement principle, directly on the high-voltage side and with RBM technology
  • Automatic self-test with HV output voltage test
  • Fully automatic measuring sequences from 18 pre-programmed test standards and 10 user-programmable test sequences

Product Code: Dta-100-C

Fully Automatic Water Content Measuring Test Equipment

Fully%20Automatic%20Water%20Content%20Measuring%20Test%20Equipment

Fully Automatic Water Content Measuring Test Equipment Aquameter KFM 3000. The Fully Automatic Water Content Measuring Test Equipment Aqua-meter (KFM 3000) offered by us based on coulometer Karl Fischer titration. These equipment are used in water content determination. Our equipment are known for accurate outputs and high-efficiency. Moreover, the products are available at industry leading prices. We are majorly looking for queries from Madhya Pradesh, Chhattisgarh, Rajasthan, Orrisa & Uttar Pardesh.

 

Technical Specifications:


  • Despite its compact construction the equipment fulfills all the expectations
  • It has two operational modes that includes an expert and a standard mode
  • In the standard mode only those functions are accessible which are used during the daily routine
  • The operational mode is extremely simple and requires only a few interactions from the user

Universal Testing Device For Electrical Diagnostics

Universal%20Testing%20Device%20For%20Electrical%20Diagnostics

Electrical tests on transformers, current transformers, voltage transformers, grounding systems, lines and cables, and circuit breakers can be performed with the CPC 100. 

The patented test system replaces several individual testing devices and offers new, innovative testing methods.

The CPC 100 is the base for multiple accessories. These facilitate further applications, such as tan delta measurements, as well as line and ground impedance measurements


Applications

Current transformers (CT)
  • Ratio, burden and polarity
  • Phase and magnitude error
  • Excitation curve
  • Winding resistance
  • Secondary burden
  • Dielectric withstand voltage 
    (2kV AC)
  • CT circuit continuity
Voltage transformers (VT)
  • Ratio, burden and polarity
  • Phase and magnitude error
  • Excitation curve
  • Winding resistance
  • Secondary burden
  • Dielectric withstand voltage 
    (2kV AC)
  • VT circuit continuity
Transformers
  • Ratio
  • Winding resistance
  • Tap changer test
  • Excitation current
  • Short circuit impedance
Lines and cables 
  • Impedance (k-factor)
  • Transformer coupling


Grounding systems
  • Ground impedance
  • Step and touch voltages
Circuit breakers
  • Contact resistance

Product Code: CPC100

Capacitance & Dissipation Factor Testing Device

Capacitance%20%26%20Dissipation%20Factor%20Testing%20Device

Combined with the CPC 100, the CP TD1 measures the capacitance and dissipation factor (power factor) with laboratory precision.

This allows the insulation condition of transformers, generators and other parts of high-voltage systems to be tested according to IEEE 62 (C57.152), IEC 60076-1 and -3, as well as the CIGRE "Guide for Transformer Maintenance". As recommended in the CIGRE Guide, testing is performed at variable frequencies to better diagnose signs of ageing in insulation. We are majorly looking for queries from Madhya Pradesh, Chhattisgarh, Rajasthan, Orrisa & Uttar Pardesh.

The portable test system (max. 29 kg per component) can also generate output voltages of up to 12 kV.


Applications:

The following variables can be measured by extending the CPC 100 to include the CP TD1:

  • Capacitance
  • Dissipation factor tan δ (tan delta)
  • Power factor cos φ
  • Watt losses
  • Power (effective power, apparent power, reactive power)
  • Impedance (absolute value, phase, inductance, resistance, quality)

Partial Discharge Test And Measurement System

Partial%20Discharge%20Test%20and%20Measurement%20System

Partial discharges (PD) are often indicators of insulation faults. It is therefore helpful to be able to detect even the faintest sign of partial discharges. Complete failure of valuable installations and systems can be analyzed early on and thereby prevented.

MPD systems measure and analyze partial discharges both precisely and reliably. In the vicinity of strong electrical interference fields, even the weakest signals can be filtered out and isolated for further analysis.

With many complex test objects, multiple simultaneous measurements are required. An MPD can be effortlessly combined with other MPDs. It is the only system worldwide that records and analyzes all signals completely simultaneously.

We are majorly looking for queries from Madhya Pradesh, Chhattisgarh, Rajasthan, Orrisa & Uttar Pardesh.

To,Test & Measurement Company

Promote Your Business with IndiaMART
Enter Your Website URL
RECOMMENDED COMPANIES