We manufacture waterproofing membranes which stands out for its toughness and excellent low temperature pliability; it confers high resistance to atmospheric agents and a maximum guarantee of durability to the membrane. They have fine finishes and confer the best mechanical properties. Various features of these membranes are:

Features:

• High tensile strength
• Maximum puncturing strength (static and dynamic)
• Great tear strength
• Good dimensional stability

We offer a wide range of water proofing membranes which include Unprotected and protected polymeric bitumen membranes, polymeric self-adhesive membranes and oxidized bitumen membranes for roofs and walls waterproofing under brand names like MOPLY, TEXSELF, MULTIPLAS & PLASFAL.

We manufacture thermal insulating boards for decks, walls and floors and promote them under brand names ROOFMATE, WALLMATE, FLOORMATE DOW. These are self-protected insulating board for lightweight inverted-system flat roofs. They are made of rigid extruded polystyrene foam with a closed-cell structure. Various features of these boards are:

Features:

• Excellent thermal conductivity
• Lightweight
• Tongue-and-groove joints on longitudinal edges ensure the boards fit together well and prevent possible wind damage
• The top mortar layer protects the boards from the effects of UV rays
• High compressive strength and creep strength (deformation due to compression over a long period of time)
• Closed-cell structure: minimal water absorption and high resistance to vapour diffusion
• High resistance to freeze-thaw cycles
• Resistant to ageing
• Easy to work with and install
• M1 reaction to fire classification
• Does not contain CFC’s

We manufacture polymer-based, asphalt-free acoustic insulation membrane for soundproofing, that offers good acoustic insulation in different building elements under the brand name TECSOUND and TEXILEN. Various properties of our membrane are:

Properties:

• High acoustic insulation, combined with porous, nonrigid elements
• Flexible
• Great elongation capacity
• Easy handling and adaptable to uneven surfaces
• Cold- and heat-resistance
• Excellent ageing resistance
• Rot-proof

We manufacture Polyester geotextile fleeces which is a punched, short fibre geotextile used for construction and public works and promoted under the brand name ROOFTEX & TERRAM. Various properties of our products are:

Properties:

• High water permeability
• Non-polluting (allows water to flow through, but not fine particles)

Applications

• Filtration: The product is crosswise permeability allows water to flow through but retains fine particles
• Separation: Prevents particles from different soils from becoming mixed. Prevents contact between non-compatible materials. Acts as a permeable barrier between soils with different structures
• It's characteristics make it especially suitable to be used as a separating layer for inverted-system roofs with gravel finish
• Because of its deformability, special care should be taken when applying the geotextile

We manufacture polystyrene and polyethylene sheets is a sheet drain made up of a three-dimensional polystyrene structure with a polypropylene geotextile on one side. and polypropylene geotextile layers to permit water flow for drainage of walls and sole plates under the brand name DRENTEX. Various features of our products are

Properties:

• The non-woven propylene acts as a water filter to prevent soil from blocking drainage, while the polystyrene dimples guide and drain off the water. The entire system drains off water and protects the waterproofing on walls, foundations, etc
• A stable, reliable and fungi-proof drainage system
• Because all the dimples are connected directly to the geotextile structure, high compressive strength is provided to ensure the drainage volume is not reduced by pressure from the soil
• Easy to transport and install

Applications

• Drainage of walls and sole plates: low water collection

We manufacture PVC joints which is a pre-formed PVC joint with plasticizers for use with concreting joints and expansion joints in concrete structures to ensure water tightness. Various features of our products include:

Properties:

• Resistance to ageing and ultraviolet rays
• Resistance to corrosion
• Easy to install and weld (very good welding properties)
• Resistant to oil and low temperatures. High elasticity

Applications

In vertical and horizontal expansion joints and concreting joints in new concrete structures, including slabs, outer walls of underground parking garages, tunnels and any concrete structures that must be completely sealed.

We manufacture a wide range of auxiliary products to finish a waterproofing or roofing work and promote them under brand name of GARGOYLES, DRAINS and GRAVEL GUARDS. They are a new type of drain that eliminate problems between lead, zinc or plastic drains and asphalt products. The base is made of materials that allow asphalt to penetrate and form a continuous sheet-drain unit. Their features include:

Features:

• Ductile
• Complete, totally finished system
• Watertight
• Easy to install
• Absorbs roof movements
• Can be welded directly to the sheet
• Flame-resistant during sheet application
• The tube is cone-shaped at the bottom and cylindrical at the top, thus ensuring perfect penetration

We manufacture shingles for roofing, conferring waterproofing and a high quality aesthetic finish. We offer our shingles under various brand names like TEGOLA, PRESTIGE and COPPER; TITANIUM & CERAMIZED. This is a shingle for pitched roofs, conferring waterproofing and a high quality and provide beautiful finish to the roof. Various properties of shingles are:

Properties

• High quality: high quality product, designed to be installed on prestigious jobs
• Lightweight
• Practical: it does not break during transport and unloading, it does not take up a lot of space and it is quick to apply
• Adaptable: it adapts with technical efficiency and aesthetically to all roofs, from an 8% slope to a vertical surface