• Air conditioning
• For handling hot air up to 800 ºC
• Ventilation Air
• Combustion Air
• Fumes Exhaust
• Ultra Clean Rooms

• Belt driven
• Directly coupled to motor
• Impeller mounted directly on motor shaft.

• Heating: By electrical M.S / S.S heaters or, by Thermic Fluid / Steam / Chimney Flue gases circulation / infrared.
• Temperature: Up to 400 ° C.

When dust particle sizes are lesser than 10 µ size, filtration is done with the help of filter cloth.

1. Types of filters are as follows: -
• Pleated type cartridge filters having higher cloth area in a given surface area
• Cylindrical shaped filters
2. Cloth cleaning devices are as follows: -
• Manual shaking by hand from time to time.
• Mechanical shakers.
• Auto power pulse- jet controlled by panel.
3. Usage:
• Pollution control systems used for
• Secondary lead smelting units,
• Brake shoe grinding units,
• Lead Ball mill machinery,
• Polishing machines / Buffing machines etc.

• End Requirement: Temperature attained: - 200 - 250 ° C
• Material of construction of circulation coil: M.S / S.S.
• Heat capacity:Up to 3 lakhs Kcal.
• Insulated with Glass wool from outside.

• This is a device to separate solids (in powder or granular form) from air/gases.
• Air flows at very high speeds in the conical portion periphery which slide to the bottom & leaves dust / solids at bottom.
• Collection: 90% of more than 10 µ particle sizes.
• Usage: Buffing / Grinding / Polishing machines / Air pollution control.
• Material of construction: M.S / S.S.
• Sizes: 300 mm diameter to 1600 mm diameter Cyclones have been manufactured & successfully commissioned by us.

Inner tank stores material to be heated, thermal fluid heating media is in between inner & outer tanks & outside covering is of 4” insulation.

• Usage: Heating Powders / Liquids up to 200° C.
• Insulation: Ceramic Wool / Mineral Wool etc.

• Wherever acid fumes are generated, directly exhausting to atmosphere creates lots of environmental problems. In such cases, PP / FRP material is used for fabricating systems that can withstand the corrosive nature of fumes.
• Scrubbers are basically increased interaction areas provided between fumes & water & this leads to acids / alkali’s being dissolved in water, while the clean gases are discharged to the environment. Industry : Picture tubes / Galvanising plants

• Usage: for burning L.D.O, furnace Oil etc.
• Capacity range: 0 - 300 Litres / hr.
• Ancillary equipment: Oil Filters, Oil Pumping, heating & filtering units etc.
• Models available in different sizes according to oil consumption figure.

• Rotary furnaces are used in secondary smelting units for re -processing Copper / Lead from scrap.
• Rotary furnaces have an inner brick lining over which scrap is transformed from solid to molten state due to heat given by oil firing. Oil firing is done with the help of a high -pressure air blower.
• For copper smelting & refining: Refined material is discharged into moulds which are kept in vertical position on trolleys
• For Lead smelting & refining: Refined material is discharged into moulds.
• Rotary furnace is installed on rotary base. It rotates on heavy wheels mounted on base & for pouring finished material; it is lifted by hydraulic cylinders through a power pack.

• Sieves of different meshes are used to separate different grades of material.
• Heavy-duty electrical motor.
• Material fed on upper deck travels in spiral motion as it is subjected to horizontal & vertical forces.
• Usage: solid / solid, liquid / solid separation, polishing, pollution Control, Filtration.
• Material of construction: M.S / S.S

List of equipments supplied:

• Radiant coil kept directly above the firing / heating chamber
• Convective coil, joined to radiant coil
• Thermic fluid pump Air preheater
• Cyclone dust collector Chimney
• Air Blowers Deareator tank
• Insulation wherever necessary to prevent heat losses.
• Material of construction of circulating coils: M.S / S.S

Heat capacity: Up to 6 lakhs Kcal / hr.

Usage: FBD’s, Paper / Printing & Lamination units, Food industry, Adhesive industry etc.