"THERMOTECH" liquid phase heating systems essentially comprises of a fully automatic packaged Oil/Gas THERMIC FLUID HEATER. As a result thermic fluid can be heated upto 300°C at near atmospheric pressure, with efficiency as high as 87% on NCV of Oil/Gas fuel.

Oil/Gas fired THERMIC FLUID HEATER
The Capacity ranges 1 to 25 lac kcal/hr

We provide combustion systems for multi fuels. By which the process of combustion is carried on and produces enough energy .

The WATERTHERM is a very compact fully automatic packaged hot water generator in ready to install condition and can be installed where ever space is available. It does not require any special room like boiler house. It falls outside the purview of Indian Boiler Regulations. WATERTHERM is a safer and economical system which delivers hot water much faster than any other conventional system. It's most ideal usage includes HOTELS, HOSPITALS, RESIDENTIAL COMPLEX, LAUNDRY, DAIRY INDUSTRIES, etc. where continuous hot water supply is essentially required. WATERTHERM system is available in wide range of heat output from 70,000 kcals/hr. to 10,00,000 kcal/hr., to give output of 1250 ltrs/hr. to 18,200 ltrs/hr. of hot water at about 65°c temperature.

MODEL Dimens.	WT 100	WT 200	WT 400	WT 600	WT 1000
L (mm)	11000	11500	12000	12500	1400
W (mm)	3000	3500	3400	4500	5500
H (mm)	6500	7200	7500	7700	8200

TECHNICAL FEATURES

• Enhanced engineering design with optimum technology.
• Optimum heat transfer hence high efficiency of 90 %.
• Elegant control panel with high end safety features.
• Quality Assured manufacturing.
• Anti drip imported burner hence high combustion rate.
• Precision wound coil.
• Continuous supply of hot water upto 90°c, round the clock.
• Enhanced safety with burner cut-off for flame failure, high water temperature
• High stack temperature & no water conditions.

The "THERMOTECH" uni steam generating system essentially comprises of a fully automatic reverse flame package type steam generator, which consists of membrane type helical coil integral combustion chamber accommodated in S.S. and insulated shell. The hot fuel outlet is connected to smoke tube preheater to preheat feed water. The feed water pump, blower, fan, fuel pump are mounted on common base frame. The steam generators are suitable to generate dry saturated steam from 200 kg/hr. to 800 kg/hr. at 15 kg/cm² maximum pressure.


REVERSE FLAME UNI-STEAM SYSTEM

The uni-steam generating system is comprised of: An automatic 2 or 3 pass package type steam generator consisting of helical membrane coil type integral combustion chamber accommodated in M.S./S.S. & insulated shell. The hot flue outlet is connected to smoke tube vertical feed water preheater. The feed water is first passed through preheater which eliminates dissolved gases from feedwater, then through a high pressure triplex plunger pump, the water is feed to the helical coil. The water is slowly transformed into dry saturated steam.

BURNER

The steam generator is equipped with fully automatic pressure automising type burner consisting of micro holed nozzle, sparking electrodes, photocell flame sensing device for silent operation, diffuses plate for mixing air, high pressure gauge pump coupled with forced draught blower.

FEED WATER PUMP

The triplex plunger pump coupled with 3 phase electric motor is provided which feeds the water at 70 to 80oC temperature upto 20 Kg/cm2 pressure, with release valve for safety.

FEED WATER TANK

A MS. fabricated service tank of 1000Lts. capacity is equipped with the level indicator, Electric water level control with dead level sensor which cuts off the firing of the boiler in case of no water in the service tank. The level controller automatically maintain the water level of the feed water tank.

We provide cross sectional view system .

Applications :

• Dyes
• Textile
• Plastic & Rubber
• Petroleum
• Corrugation

This has complete safety features in it .

We believe in preserving energy and making the environment safer. We provide eco friendly machines.

We provide pipe line solutions through which various fuels are transferred .

We offer different pipe line solutions to the client .