We manufacture a wide range of manual firing systems where in complete combustion of solid fuel is achieved thorough mixing of fuel. Air and a self sustainable 'combustion temperature is ensured by adequate oxygen to every particle of fuel. Design and performance of each system is influenced by different physical and chemical properties of each solid fuel.

We adopt fluidized bed combustion technology for handling graded fuels and our firings system is widely used for different solid fuels such as coal, lignite, wood waste, husk, petcoke, bagasse & biomass fuels.

Features:

• Low operating cost
• Trouble free operation
• Lesser maintenance

Use of latest technology ensures:

• Homogeneous mixing of fuel ensuring efficient combustion turbulence in bed due to high
• Automatic operation for consistent performance, hence less dependency on labors during continuous operation
• Efficient Combustion of low grade fuels

Technical specifications:

Thermic Fluid Temperature Control

• Digital temperature indicator cum controller cut of ID/FD fan at preset temperature and Restart at preset differential temperature to maintain system temperature

Stack Temperature Control

• A Blind temperature controller cut of ID/FD fan & sound alarm if stack (flue gas temperature exceeds to preset temperature

Low/No Flow of Thermic fluid

• Differential pressure switch connected across inlet & outlet headers signals low flow alarm in case of low fluid pressure of thermic fluid in coils

Low Level of Thermic fluid

• The visual level indicator & float actuated level switch fitted in expansion tank signals alarm in case of low level thermic fluid in the system

Thermic fluid Pump Motor Trip

• In case of thermic fluid pump motor trip, electrical interlocks cutoff ID/FD fan

Power Failure

• Diesel Engine drive keeps thermic fluid moving in the system to prevent it's degradation & overflow

Excess Furnace Bed Temperature

• Digital temperature indicator cum controller senses furnace bed temperature & cut off ID/FD fan above set value (for FBC unit)

Fluid Heaters-Vertical"

This equipment possess vertical "fluid heater which is suited for various industries across India & abroad in this rapidly changing & undependable energy situations.

Our designs of vertical heaters coupled, with internal furnace gives assurance of the rated output on any solid fuels like Coal, Wood, Lignite, Husk, Bagasse, Pet coke, Sow dust, etc. without compromising on performance.

We have perfect solutions for meeting the process requirement of our clients as we provide consistent range of firing systems for reducing downtime that leads to further increase in profitability.

Fluidized Bed Combustion

This is the technology that we adopt while manufacturing our fire fighting systems which helps in homogeneous mixing of fuel for maintaining uniform bed temperature & leave low un-burnt fuel, guaranteeing 5 to 7% higher efficiency than any other combustion system.

Air Pre Heater (APH)

There is present an Air Pre Heater (APH) which recovers heat from' flue gases and passes it to combustion chamber. This in turn increases efficiency by 3 to 4% and also reduces flue gas temperature at I.D. Fan which in turn reduce volume of air handled resulting in lower power consumption and ensure higher life of I.D. Fan.

Balance Draft System with in the firing systems ensure ensure minimum penetration of unwanted air through doors and fresh air passes through APH. This ensures maximum fuel to heat operating efficiency for any commercial grade of different fuels.

ApplicationsChemicals:

• Reaction Kettles
• Evaporators
• D

Precisely engineered range of Manual + Auto Firing System is manufactured at our production unit in the supervision of technical experts. These systems are customized as per the specifications of our clients and are in compliance with international norms of quality.

Features:

Thermic Fluid Temperature Control

• Digital temperature indicator cum controller cut of ID/FD fan at preset temperature and Restart at preset differential temperature to maintain system temperature

Stack Temperature Control

• A Blind temperature controller cut of ID/FD fan & sound alarm if stack (flue gas temperature exceeds to preset temperature

Low/No Flow of Thermic fluid

• Differential pressure switch connected across inlet & outlet headers signals low flow alarm in case of low fluid pressure of thermic fluid in coils

Low Level of Thermic fluid

• The visual level indicator & float actuated level switch fitted in expansion tank signals alarm in case of low level thermic fluid in the system

Thermic fluid Pump Motor Trip

• In case of thermic fluid pump motor trip, electrical interlocks cutoff ID/FD fan.

Power Failure

• Diesel Engine drive keeps thermic fluid moving in the system to prevent it's degradation & overflow

Excess Furnace Bed Temperature

• Digital temperature indicator cum controller senses furnace bed temperature & cut off ID/FD fan above set value (for FBC unit)

Fluid1 Heaters Vertical

Our range of Manual Auto Firing System is widely appreciated across India and globe for high efficiency and precious performance. These vertical heaters are coupled with for giving of the rated output on a wide range of solid fuels such as coal, wood, lignite, husk, bagasse, pet coke, sow dust, etc.

Fluidised Bed Combustion

This is the technology that is adopted with in our systems that ensure homogeneous mixing of fuel for maintaining bed temperature thus leaving the low un burnt fuel and guarantees 5 to 7% higher efficiency than any other combustion system.

Air Pre Heater (APH)

There is also present a specially designed air pre heater with in our combustion systems for recovering waste heat from flue gases thus passing it to combustion chamber. The heater increases the efficiency of the system by 3 to 4% and reduces flue gas temperature at I.D. Fan. This reduces the volume of air handled which results in lower power consumption and ensures higher life of I.D. Fan.

Balance Draft System ensures minimized infiltration of unwanted air through doors and fresh air passes through APH. This ensures supply of maximum fuel to heat operating efficiency for any commercial grade of different fuels.

Applications

Chemicals:

• Reaction Kettles
• Evaporators
• Distillation Columns
• Tray Dryers

Textile

• Polymeriser
• Curing Machines
• Hot Air Stenter

Plastic & Rubber

• Bonding and Curing
• Vulcanising-heating for Extrusion Presses
• Impregnation Process
• Molding
• Laminating
• Pressing

Plywood & Laminate

• Veneer Dryers
• Plywood Press
• Seasoning Chamber
• Craft/ Tissue Paper Dryers

Metal Finishing

• Heating
• Pickling
• Anodising and Phosphatmg Bathsv Drying Ovens
• Qegreasing Plants

Food Industry

• Refining Process
• Fruit and Vegetables
• Canning
• Dehydration

Packaging

• Rotogravure
• Flexography
• Metallising etc

Rubber

• Hydraulic Press
• Chamber

Confectionery

• Dryers
• Mixers

We manufacture a wide range of manual firing systems where in complete combustion of solid fuel is achieved thorough mixing of fuel. Air and a self sustainable 'combustion temperature is ensured by adequate oxygen to every particle of fuel. Design and performance of each system is influenced by different physical and chemical properties of each solid fuel.

We adopt fluidized bed combustion technology for handling graded fuels and our firings system is widely used for different solid fuels such as coal, lignite, wood waste, husk, petcoke, bagasse & biomass fuels.

Features:

• Low operating cost
• Trouble free operation
• Lesser maintenance

Use of latest technology ensures:

• Homogeneous mixing of fuel ensuring efficient combustion turbulence in bed due to high
• Automatic operation for consistent performance, hence less dependency on labors during continuous operation
• Efficient Combustion of low grade fuels

Technical specifications:

Thermic Fluid Temperature Control

• Digital temperature indicator cum controller cut of ID/FD fan at preset temperature and Restart at preset differential temperature to maintain system temperature

Stack Temperature Control

• A Blind temperature controller cut of ID/FD fan & sound alarm if stack (flue gas temperature exceeds to preset temperature)

Low/No Flow of Thermic fluid

• Differential pressure switch connected across inlet & outlet headers signals low flow alarm in case of low fluid pressure of thermic fluid in coils

Low Level of Thermic fluid

• The visual level indicator & float actuated level switch fitted in expansion tank signals alarm in case of low level thermic fluid in the system

Thermic fluid Pump Motor Trip

• In case of thermic fluid pump motor trip, electrical interlocks cutoff ID/FD fan

Power Failure

• Diesel Engine drive keeps thermic fluid moving in the system to prevent it's degradation & overflow

Excess Furnace Bed Temperature

• Digital temperature indicator cum controller senses furnace bed temperature & cut off ID/FD fan above set value (for FBC unit)

Fluid1 Heaters Vertical

This equipment possess vertical for a fluid heater which is suited for various industries across India & abroad in this rapidly changing & undependable energy situations.

Our designs of vertical heaters coupled, with furnace gives assurance of the rated output on any solid fuels like Coal, Wood, Lignite, Husk, Bagasse, Pet coke, Sow dust, etc. without compromising on performance.

We have perfect solutions for meeting the process requirement of our clients as we provide consistent range of firing systems for reducing downtime that leads to further increase in profitability.

Fluidized Bed Combustion

This is the technology that we adopt while manufacturing our fire fighting systems which helps in homogeneous mixing of fuel for maintaining uniform bed temperature & leave low un-burnt fuel, guaranteeing 5 to 7% higher efficiency than any other combustion system.

Air Pre Heater (APH)

There is present an Air Pre Heater (APH) which recovers heat from' flue gases and passes it to combustion chamber. This in turn increases efficiency by 3 to 4% and also reduces flue gas temperature at I.D. Fan which in turn reduce volume of air handled resulting in lower power consumption and ensure higher life of I.D. Fan.

Applications:

Chemicals

• Reaction Kettles, Evaporators, Distillation CoJumns, Tray Dryers

Textile

• Polymeriser, Curing Machines, Hot Air Stenter

Plastic & rubber

• Bonding and Curing, Vulcanising-heating for .Extrusion Presses, Impregnation Process, Moulding and Laminating Pressing

Plywood & Laminate

• Veneer Dryers, Plywood Press, Seasoning Chamber, Craft/ Tissue Paper Dryers

Metal Finishing

• Heating, Pickling, Anodising and Phosphatmg Bathsv Drying Ovens, Qegreasing Plants

Food Industry

• Refining Process, Fruit and Vegetables Canning, Dehydration

Packaging

• Rotogravure, Flexography, Metallising, Etc

Rubber

• Hydraulic Press, Chamber, Etc

Confectionery

• Dryers, Mixers

Miscellaneous

• Insulation Drying, Sealing Batteries, Perfume Manufacture and Printing Ink Drying, Heating of Bulk Storage Tanks, Bitumen Hetiiing, Space Heating