We offer high performance radbay lamps for use at low or high mounting heights in commercial and residential buildings, towers, etc. Its specifications are:

• Die cast aluminium chassis in oxy-metalized finish
  
• Robust and aesthetic grey enclosure
  
• Chassis fitted with 'U' bolt for mounting luminaire
  
• High purity aluminium parabolic reflector with electrochemically brightened anodised finish
  
• Removable and sealed toughened glass assembly secured with safety chain (WHM /S /H 48 & 49)
  
• Internal wiring of class 'H' insulation in XLPE and with conductor cross sectional area of 0.75 sq.mm
  
• Suitable for 250/400 W HPMV lamp, 150/250/400 W HPSV (E) and 250/400 W Metal Halide (E)

We offer highly efficient and illuminating devices in cubix series. Its specifications are:

• CRCA powder coated housing.
• Specially designed, formed CRCA powder coated bottom rim.
• High efficiency aluminium anodized satin finish reflector.
• CUBIX 10 (GCP 10 series) -square downlighter with satin reflector.
• CUBIX 15 (GCP 15 series) -low depth square downlighter with frosted non yellowing PMMA diffuser.
• CUBIX 16 (GCP 16 series)-low depth downlighter with frosted non yellowing PMMA diffuser.
• Snap-fit rim for ease of handling.
• Integral, covered control gear for 13&18W CFL(TC-D/TC-DE).
• Separate control gear box pre-wired to downlighter for 26 W CFL(TC-D/TC-DE).
• Suitable for 1x13W, 2x13W CFL(TC-D), 1x18W, 2x18W, 1x26W, 2x26W CFL (TC-d/TC-DE) lamps.
  
• Conforms to IS 10322/ part 5/ sec 1:1987.

We present platina, a recess mounted direct-indirect wall light luminaire with central non-yellowing acrylic diffuser suitable for 2 x 36, 2 x 40, 2 x 55 W CFL (TC-L) and 4x 14 W FTL (T5) lamp. Its specifications are:

• Wing shaped reflector cum housing in white powder coated steel delivers uniform luminance in vertical and horizontal direction for visual harmony and reduced contrast
  
• Opal non- yellowing diffuser fitted in aesthetically designed hingeable frame with ribbed pattern
  
• Complete with ballast and accessories pre-wired upto terminal block
  
• Suitable for 2 x 36, 2 x 40, 2 x 55 W CFL(TC-L)and 2 x 14 W FTL (T5) lamp
  
• Designed and manufactured to comply with IS 10322 part 5/Sec 11987

We bring you a world-class range of street and flood lights.

Creative solutions for Brightness Management through:

• Technically superior products like Express, Express 2, WFZ31.WFZ42 etc.
• Energy saving solutions through luminaires designed for Metal Halide (MHL) and High Pressure Sodium Vapour (HPSV) Lamps
• Trustworthiness and Reliability of WIPRO

Pot optics IP 65 deep drawn aluminium Street light luminaire

Specifications

• Single piece deep drawn aluminium housing with built in electrochemically brightened, anodised high purity aluminium pot optics reflector
• Die cast aluminium pole mounting system with option of side and bottom entry
• Silverized finish from outside
• Hinged toughened glass shield
• Anti corrosive SS toggles
• EPDM gasket
• Complete with heavy duty copper wound ballast, PF capacitor
• Heat and abrasion resistant XLPE wires

We offer textured aluminium reflectors available in low and high depth variants so as to meet different application requirements. Its WCP 41 series is a recessed mounted, high depth, low glare down lighter with super purity textured aluminium reflector suitable for 2 x 26W / 1 x 26W/ 2 x l8W TC-D lamps. Its WCP 32 series is also a recessed mounted downlighter but with super purity textured aluminium reflector suitable for 2 x 26W / 1 x 26W / 2 x l8W TC-D lamps.

Benefits

• Aesthetic desigs for wide range of applications
• Specular finish multifaceted aluminium reflector
• Long life
• Surface finish in epoxy polyester powder coating provides higher corrosion resistance & life long finish
  
• Excellent light distribution achieved by super high purity textured aluminum reflector
• Energy savings by low loss of electromagnetic ballast and option of sigma digital ballast available for 2x18 W TC-DE ranges
• Low glare is achieved through compact design of high depth reflector and pushed back lamps.
• Ease of installation and easy access to ballast and accessories

We bring forth an international range of electronic switches that come with the following specifications:

Specifications

• Modules are firmly mounted on frames with two screws - this ensures sturdy mounting, which can handle enough wire pressure required especially in sockets
• All parts which are in contact with live 1 metal are made of thermoset material, which has excellent electrical insulation properties, does not melt on heating and does not catch fire. Owing to this, all our products are strong and sturdy with flame proof quality and capable of handling higher currents and operating temperatures. Thermoset material is normally used in industrial applications.
• Only the visible parts are made of polycarbonate which has high degree of surface finish and gloss. Visible parts are not in contact with any 'live metal' part and hence, it is safe to use polycarbonate for this purpose.
• Sockets: Spring loaded tubes to ensure uniform pressure and a firm unwavering contact
• Sockets: Multi-Socket (3+2 pin) available which can take one 3-pin plug and one 2-pin plug simultaneously.
• Fan Regulator: Step-type with 6 distinctive positions for excellent speed control.
• Fan Regulator: Unique selector switch with cam-type operation. Knob can be rotated full 360°, hence any amount of pressure can be applied while turning the knob.

We offer best quality TIG/MIG welding machines strong welding heads, displays and automatic functions. Some of the features of our welding machines are:

TIG Machines

• Fully thyristorised control
  
• Ensures no drift in current & voltage
  
• High frequency & pulsing unit in built
  
• Excellent TIG / MMAW characteristics
  MIG Machines
  
• Excellent arc characteristics over the entire current range
  
• 25 / 30 steps voltage selection
  
• Welds from 30A for metal application to 300/400A for general fabrication
  
• Excellent portability & mobility

We bring precisely engineered CNC profile cutting machines which are renowned for their broad, high performance motion controls. Its features are:

• Rotary Bevel head for x y k type bevel cuts
  
• Advance Graphical User Interface (GUI)
  
• Advanced programming features like dynamic KERF compensation, automatic plate alignment
  
• Flexibility at your fingertips
  
• Increased speed, accuracy & greater productivity