Tl Jones India Private LimitedMumbai, Maharashtra | IndiaMART Member Since: 2007 |  |
| PRODUCTS & SERVICES | |
|
| ProductsCall Director The EMS4 Call Director system allows multiple telephone devices to communicate within a building without the need for a dedicated telephone line. If a telephone line is connected to the system, the EMS4 Call Director allows communication outside the building. The EMS4 Call Director incorporates “FORCE THRU CALLING” to ensure emergency calls cannot be ignored. Features and Benefits
Dot Matrix The E-Motive CD1001 series of Dot Matrix indicators provide user with a 4-wire serial system interface, the CD1001S, or a ten opto-isolated inputs interface, the CD1001K series. The CD1001S series works with a transmitter/encoder board (CX series) that interfaces to the lift controller through opto-couplers. The triggering signals from the lift controller, to activate the floor legends and directional arrows isencoded by the transmitter/encoder board and retransmit to all the CD1001S units through the 4-wire signal system interface.
Elevator Phone
Full Colour Tftdisplay E-motive Full Colour LCD lift displays are highly versatile, innovative and reliable tools providing an extra dimension in the provision of lift information. Not only can they provide the basic information required by a lift passenger, but also improve the environment of the lift, and enhance the experience of lift travel. E-motive Full Colour LCD Lift displays will make the interior of a lift appear more high tech (bold uniform colour displays), more pleasant (scenic pictures), and provide extra information in addition to floor position and direction. The range of information that can be displayed is large, for instance floor directories, variable messages and outside temperature.The display space can be used for all manner of advertising purposes - either increasing corporate identity within a building by use of logos, to out and out advertising of a buildings facilities, for instance restaurants and shops within a hotel. All people want to do in lifts is to avoid eye contact with other passengers, normally by looking at the only part of the lift that displays any movement - the display. One may as well take advantage of their undivided attention. Gcms Global Call Management System The GCMS is an automated testing system, designed specifically for testing lift phones as required by EN81-28:2003. The GCMS has distributed and scalable architecture, which allows the management of hundreds of thousands of test calls per year. With secure internet access, the GCMS gives you direct control ofyour phones under test, without the hassle of maintaining and paying for specialized test computer at your location. The GCMS is flexible and capable of testing a multitude of lift phones. Features and Benefits Lift Phone The G3X phone is the most compact elevator telephone on the global market. Designed for the highest reliability, the G3X uses surface mount technology reducing the likelihood of damage during installation. With a quick four point setup, the G3X reduces your installation time. The unit is phone line powered, which means less maintenance and a longer life compared to battery operated alternatives.
Machine Room Intercom Innovative technology enables the Machine Room Intercom to work with any type of ADA compliant elevator phone, allowing a low cost, easy to install retrofit solution The MRI eliminates the need for additional devices to be installed in the elevator car, by temporarily turning the existing ADA elevator phone into an intercom The MRI splices directly into the existing connection of theelevator phone, making the installation process simple, fast, and less labour intensive Microscan
Microscan
Microscan
Minichrome Display The e-motive FS0570 Minichrome Display is a mid range 256 colour LCD display using colour STN technology. With In-System programming, the Minichrome display is easy to configure whenever the need arises. Using Windows-based software via RS-232 connector, you can configure fonts, arrows, logos, floor numbers and messages. It has 16 on-board opto-isolated inputs, and can also be used in serial mode connected to a CX encoder. Your elevator is not just a mode of vertical transport, with the Minichrome display it can also enhance your buildings image at an affordable price
Monochrome Display The FS540 monochrome LCD Display is a good value, innovative and visually attractive lift indicator display that was developed to provide a high-tech looking alternative to normal dot matrix displays. The FS540 comes in two colour combinations, eye-catching blue on yellow, and contrasting dark grey on white. The display comes in two orientations, vertical and horizontal, each with their own advantageous features. Since its introduction, the display has evolved into more than just an LCD version of a dot matrix display, into a purveyor of information (via messages) and a useful tool in enhancing a corporate identity throughout a building (through use of logos).
Pnb Phones
Psm Phones
Pss / Pslphones The PSS/PSL elevator phone is the best option for replacing a phone cabinet. When a flush mount unit is needed, this stainless steel ADA compliant phone is a perfect retrofit solution. Made of 16 gauge stainless steel with a#4 brush finish, these units are designed to be vandal resistant and stand up to harsh wear. Units are available in Muntz metal and special sizes upon request Slim Electronic Gong E-Motive Display Slim Electronic Gong (SL001) is designed to function from 15-36V DC derived from power supply at 12/24V AC/DC. The SL001 series offersthe choice of a single or double tone. The Slim Electronic Gong is suitable for use with the E-Motive Display range of compact digital indicators. The SL001 series requires only two cable connections (Indicator/Gong up, Indicator/Gong Down), plus one cable connection per floor provided indicator and gong signal voltages are the same. When used with compact range of displays, it plugs directly into the display board. The Slim Electronic Gong can be easily mounted into any fixture. Three connecting leads of 200mm minimum length are provided together with a connector that can be plugged into any compact type display.
Dot Matrix The E-Motive CD1008 series of Dot Matrix indicators provide user with a 4-wire serial system interface, the CD1008S, or a ten opto-isolated inputs interface, the CD1008K series. The CD1008S series works with a transmitter/encoder board (CX series) that interfaces to the lift controller through opto-couplers. The triggering signals from the lift controller, to activate the floor legends and directional arrows is encoded by the transmitter/encoder board and retransmit to all the CD1008S units through the 4-wire signal system interface. Configuration of the floor legends and arrows are done with a user friendly configuration software provided. For the CD1008S the configuration is done on the transmitter/encoder units while the CD1008K has to be configured individually.
Dot Matrix The E-Motive CD1010 series of Dot Matrix indicators provide user with a 4-wire serial system interface, the CD1010S, or a ten opto-isolated inputs interface, the CD1010K series. The CD1010S series works with a transmitter/encoder board (CX series) that interfaces to the lift controller through opto-couplers. The triggering signals from the lift controller, to activate the floor legends anddirectional arrows is encoded by the transmitter/encoder board and retransmit to all the CD1010S units through the 4-wire signal system interface.
Dot Matrix The E-Motive CD3001 series of Dot Matrix indicators provide user with a 4-wire serial system interface, the CD3001S, or a ten opto-isolated inputs interface, the CD3001K series. The CD3001S series works with a transmitter/encoder board (CX series) that interfaces to the lift controller through opto-couplers. The triggering signals from the lift controller, to activate the floor legends anddirectional arrowsis encoded by the transmitter/encoder board and retransmit to all the CD3001S units through the 4-wire signal system interface.
Dot Matrix The E-Motive CD3008 series of Dot Matrix indicators provide user with a 4-wire serial system interface, the CD3008S, or a ten opto-isolated inputs interface, the CD3008K series. The CD3008S series works with a transmitter/encoder board (CX series) that interfaces to the lift controller through opto-couplers. The triggering signals from the lift controller, to activate the floor legends anddirectional arrows is encoded by the transmitter/encoder board and retransmit to all the CD3008S units through the 4-wire signal system interface.
Dot Matrix The E-Motive CD3010 series of Dot Matrix indicators provide user with a 4-wire serial system interface, the CD3010S, or a ten opto-isolated inputs interface, the CD3010K series. The CD3010S series works with a transmitter/encoder board (CX series) that interfaces to the lift controller through opto-couplers. The triggering signals from the lift controller, to activate the floor legends anddirectional arrows is encoded by the transmitter/encoder board and retransmit to all the CD3010S units through the 4-wire signal system interface
Dot Matrix The E-Motive CD4005 series of Dot Matrix indicators provide user with a 4-wire serial system interface, the CD4005S, or a ten opto-isolated inputs interface, the CD4005K series. The CD4005S series works with a transmitter/encoder board (CX series) that interfaces to the lift controller through opto-couplers. The triggering signals from the lift controller, to activate the floor legends anddirectional arrows is encoded by the transmitter/encoder board and retransmit to all the CD4005S units through the 4-wire signal system interface.
Dot Matrix The E-Motive CD4006 series of Dot Matrix indicators provide user with a 4-wire serial system interface, the CD4006S, or a ten opto-isolated inputs interface, the CD4006K series. The CD4006S series works with a transmitter/encoder board (CX series) that interfaces to the lift controller through opto-couplers. The triggering signals from the lift controller, to activate the floor legends anddirectional arrows is encodedby the transmitter/encoder board and retransmit to all the CD4006S units through the 4-wire signal system interface.
Dot Matrix The E-Motive MS122X series of 0.5 inches, 2 digits, 16 segment indicators, provide user with a serial interface using 3 wires which carry both serial data as well as the power supply to the units. The MS122X series works with a transmitter/encoder board (MX series), which interface to lift controller through opto-couplers. The triggering signals from the lift controller, to activate the floor legends and directional arrows, is intercepted bythe transmitter/encoder board and retransmit to all the MS122X series unit through the serial interface.
Dot Matrix The E-Motive MS252X series of 1 inch, 2 digits, 16 segment indicators, provide user with a serial interface using 3 wires which carry both serial data as well as the power supply to the units. The MS252X series works with a transmitter/encoder board (MX series), which interface to lift controller through opto-couplers.The triggering signals from the lift controller, to activate the floor legends and directional arrows, is intercepted by the transmitter/encoder board andretransmittoall the MS252X series unit through the serial interface. Configuration of floor legends, floor codes and message code is stored in an on board EPROM and can be changed by the distributor with a user friendly software provided. For the MS252X series, the configuration is done on the transmitter/encoder unit.
Dot Matrix The E-Motive MS551X series of 2.3 inches, 1 digit, 16 segment indicators, provide user with a serial interface using 3 wires which carry both serial data as well as the power supply to the units. The MS551X series works with a transmitter/encoder board (MX series), which interface to lift controller through opto-couplers. The triggering signals from thelift controller, to activate the floor legends and directional arrows, is intercepted by the transmitter/encoder board and retransmit to allthe MS551X series unit through the serial interface. Configuration of floor legends, floor codes and message code is stored in an on board EPROM and can be changed by the distributor with a user friendly software provided. For the MS551X series, the configuration is done on the transmitter/encoder unit.
Dot Matrix The E-Motive MS552X series of 2.3 inches, 2 digits, 16 segment indicators, provide user with a serial interface using 3 wires which carry both serial data as well as the power supply to the units. The MS552X series works with a transmitter/encoder board (MX series), which interface to lift controller through opto-couplers. The triggering signals from the lift controller, to activate the floor legends and directional arrows, is intercepted by the transmitter/encoder board and retransmit to all the MS552X series unit through the serial interface. Configuration of floor legends, floor codes and message code is stored in an on boardEPROM and can bechanged by the distributor with a user friendly software provided. For the MS552X series, the configuration is done on the transmitter/encoder unit.
Led Hall Lantern LED Hall Lantern (MS751BN series) uses LED to display lift direction instead of conventional bulb. The MS751BN series has a long life span, up to 50,000 hours, and efficient power consumption. The MS751 series has side LED indication which allows a180 degree viewing angle. The LED Hall Lantern comes with a LEXAN lens(polycarbonate material) which provides resistance to heat. The MS751BN series is designed to compliant with an ADA (US). Evolution Lcd Displays New from E-Motive Display: the Evolution range of LCD buidling displays Pbx Phones
Microscan
Microscan
Microscan
Microscan
Microscan
Slimline GongTL Jones will be at the IEE Expo, 3-5 February 2010, |
Processing... |
| ||||||||||
