IndiaMART.com
Indiamart

  • Top Tools Technology

    Mumbai, Maharashtra

  • IndiaMART Member Since: 2011
    Products [23]

    Mobile: +(91)-9123415831

Products

Gear Hob Cutter

Gear Hob Cutter

Dear customer, 

We take this opportunity to introduce ourselves as stockiest/manufacturers of below listed gear cutting tools items in machine relieved and ground relieved from high speed steel. - imported material-m2 / m35/ m42/ asp30-delivery- in  ex-stock / 2/4 weeks    
1,hss gear hobs cutter - standard-mod; from 1module to 30 module  dp;1dp to  100dp - in 20deg / 14. 5 deg / 30 deg / 45 deg. P. A.
Finishing hob profile;standard tooth,semi -topping tooth,topping tooth,stub tooth,fellow stub tooth,bs standard,     
Roughing tooth profile; pre-s/ pre-g, protuberance tooth-pp/pgp, semi-topping tooth-ps-pgs, pre-shaving-grinding tooth-psp/pgsp ,roughing tooth, full topping,full tip radius, st+pb / tip relief / extra start / shoulder 
2, micron dia / fine pitch - gear hobs - topping / non topping-from -0. 25 module to 2. 0  module
3,  roller chain sprocket hobs -ground / unground - from -1/4" pitch to 3" pitch
4,  timing belt pulley hob -type; xl / l / h / xh / xxh / flat / htd / at / t / 8mm-h / 1/2"-l / dt etc. .  
 5  involute spline hob-serration hob / straight serration hob   parallel side spline hobs / finish spline hob / pregrind spline hob /   unground spline hob / with shoulder / with lug ,/   worm wheel hob        and all type cutter as per drawings; 
6, hss gear shaper cutter -standard-mod - 0. 50 mod  to 30 mod / dp -2dp to 52 dp                               

7, hss sprocket chain gear shaper cutter -  from -3/8" pitch to 3/4" pitch  
8, hss internal shank type  and bore type gear shaper cutter -standard & special as per drawing

9, hss involute gear milling / rack milling cutter - from 1module to 30 module  

10, hss gear shaving cutter 

11 other range of products ;     gear cutting tools & accessories;  a) konvoid blades - matl-m2-m35 (5% co)& m42 (8% co)  
b) two tool (twin) generating blades- (bevel generating blades)- matl-m2-m35 (5% co)  std & spl as per drawing   c)  carbide ball pcd pins
d)  oerlikon blades; matl-m2-m3 & m35 (5% co)
e)  cutter body bolts
f)   parallel (spacers) 
We now request you to forward your valued enquiries to us, which will receive our prompt attention.
 
Thanks and kind regards  

Gear Hob Cutter Gear Shaper Cutter

Gear Hob Cutter Gear Shaper Cutter

DEAR CUSTOMER, 
We take this opportunity to introduce ourselves as stockiest/manufacturers of below listed GEAR CUTTING TOOLS items in Machine relieved and Ground Relieved from High Speed Steel.- IMPORTED MATERIAL-M2 / M35/ M42/ ASP30-DELIVERY- IN  EX-STOCK / 2/4 WEEKS    
1,HSS GEAR HOBS CUTTER - STANDARD-MOD; FROM 1Module TO 30 Module  DP;1DP TO  100DP - IN 20DEG / 14.5 DEG / 30 DEG / 45 DEG.P.A.
FINISHING HOB PROFILE;STANDARD TOOTH,SEMI -TOPPING TOOTH,TOPPING TOOTH,STUB TOOTH,FELLOW STUB TOOTH,BS STANDARD,     
ROUGHING TOOTH PROFILE; PRE-S/ PRE-G, PROTUBERANCE TOOTH-PP/PGP, SEMI-TOPPING TOOTH-PS-PGS, PRE-SHAVING-GRINDING TOOTH-PSP/PGSP ,ROUGHING TOOTH, FULL TOPPING,FULL TIP RADIUS, ST+PB / TIP RELIEF / EXTRA START / SHOULDER 
2, MICRON DIA / FINE PITCH - GEAR HOBS - TOPPING / NON TOPPING-FROM -0.25 Module TO 2.0  Module
3,  ROLLER CHAIN SPROCKET HOBS -GROUND / UNGROUND - FROM -1/4" PITCH TO 3" PITCH
4,  TIMING BELT PULLEY HOB -TYPE; XL / L / H / XH / XXH / FLAT / HTD / AT / T / 8MM-H / 1/2"-L / DT etc.. 
 5  INVOLUTE SPLINE HOB-SERRATION HOB / STRAIGHT SERRATION HOB   PARALLEL SIDE SPLINE HOBS / FINISH SPLINE HOB / PREGRIND SPLINE HOB /   UNGROUND SPLINE HOB / WITH SHOULDER / WITH LUG ,/   WORM WHEEL HOB        AND ALL TYPE CUTTER AS PER DRAWINGS; 
6, HSS GEAR SHAPER CUTTER -STANDARD-MOD - 0.50 MOD  TO 30 MOD / DP -2DP TO 52 DP                               

7, HSS SPROCKET CHAIN GEAR SHAPER CUTTER -  FROM -3/8" PITCH TO 3/4" PITCH  
8, HSS INTERNAL SHANK TYPE  AND BORE TYPE GEAR SHAPER CUTTER -STANDARD & SPECIAL AS PER DRAWING

9, HSS INVOLUTE GEAR MILLING / RACK MILLING CUTTER - FROM 1Module TO 30 Module  

10, HSS GEAR SHAVING CUTTER 

11 Other Range of Products ;     GEAR CUTTING TOOLS & ACCESSORIES;  a) Konvoid Blades - Matl-M2-M35 (5% CO)& M42 (8% CO)  
b) Two Tool (twin) Generating Blades- (Bevel Generating Blades)- Matl-M2-M35 (5% CO)  STD & SPL AS PER DRAWING   c)  Carbide Ball PCD Pins
d)  Oerlikon Blades; Matl-M2-m3 & M35 (5% CO)
e)  Cutter Body Bolts
f)   Parallel (Spacers) 
We now request you to forward your valued enquiries to us, which will receive our prompt attention.
 

SPL Gear Cutting Tools

SPL Gear Cutting Tools

DEAR CUSTOMER, 

We take this opportunity to introduce ourselves as stockiest/manufacturers of below listed GEAR CUTTING TOOLS items in Machine relieved and Ground Relieved from High Speed Steel.- IMPORTED MATERIAL-M2 / M35/ M42/ ASP30-DELIVERY- IN  EX-STOCK / 2/4 WEEKS    
1,HSS GEAR HOBS CUTTER - STANDARD-MOD; FROM 1Module TO 30 Module  DP;1DP TO  100DP - IN 20DEG / 14.5 DEG / 30 DEG / 45 DEG.P.A.
FINISHING HOB PROFILE;STANDARD TOOTH,SEMI -TOPPING TOOTH,TOPPING TOOTH,STUB TOOTH,FELLOW STUB TOOTH,BS STANDARD,     
ROUGHING TOOTH PROFILE; PRE-S/ PRE-G, PROTUBERANCE TOOTH-PP/PGP, SEMI-TOPPING TOOTH-PS-PGS, PRE-SHAVING-GRINDING TOOTH-PSP/PGSP ,ROUGHING TOOTH, FULL TOPPING,FULL TIP RADIUS, ST+PB / TIP RELIEF / EXTRA START / SHOULDER 
2, MICRON DIA / FINE PITCH - GEAR HOBS - TOPPING / NON TOPPING-FROM -0.25 Module TO 2.0  Module
3,  ROLLER CHAIN SPROCKET HOBS -GROUND / UNGROUND - FROM -1/4" PITCH TO 3" PITCH
4,  TIMING BELT PULLEY HOB -TYPE; XL / L / H / XH / XXH / FLAT / HTD / AT / T / 8MM-H / 1/2"-L / DT etc.. 
 5  INVOLUTE SPLINE HOB-SERRATION HOB / STRAIGHT SERRATION HOB   PARALLEL SIDE SPLINE HOBS / FINISH SPLINE HOB / PREGRIND SPLINE HOB /   UNGROUND SPLINE HOB / WITH SHOULDER / WITH LUG ,/   WORM WHEEL HOB        AND ALL TYPE CUTTER AS PER DRAWINGS; 
6, HSS GEAR SHAPER CUTTER -STANDARD-MOD - 0.50 MOD  TO 30 MOD / DP -2DP TO 52 DP                               

7, HSS SPROCKET CHAIN GEAR SHAPER CUTTER -  FROM -3/8" PITCH TO 3/4" PITCH  
8, HSS INTERNAL SHANK TYPE  AND BORE TYPE GEAR SHAPER CUTTER -STANDARD & SPECIAL AS PER DRAWING

9, HSS INVOLUTE GEAR MILLING / RACK MILLING CUTTER - FROM 1Module TO 30 Module  

10, HSS GEAR SHAVING CUTTER 

11 Other Range of Products ;     GEAR CUTTING TOOLS & ACCESSORIES;  a) Konvoid Blades - Matl-M2-M35 (5% CO)& M42 (8% CO)  
b) Two Tool (twin) Generating Blades- (Bevel Generating Blades)- Matl-M2-M35 (5% CO)  STD & SPL AS PER DRAWING   c)  Carbide Ball PCD Pins
d)  Oerlikon Blades; Matl-M2-m3 & M35 (5% CO)
e)  Cutter Body Bolts
f)   Parallel (Spacers) 
We now request you to forward your valued enquiries to us, which will receive our prompt attention.
 

STD Gear Cutting Tools

STD Gear Cutting Tools

DEAR CUSTOMER, 

We take this opportunity to introduce ourselves as stockiest/manufacturers of below listed GEAR CUTTING TOOLS items in Machine relieved and Ground Relieved from High Speed Steel.- IMPORTED MATERIAL-M2 / M35/ M42/ ASP30-DELIVERY- IN  EX-STOCK / 2/4 WEEKS    
1,HSS GEAR HOBS CUTTER - STANDARD-MOD; FROM 1Module TO 30 Module  DP;1DP TO  100DP - IN 20DEG / 14.5 DEG / 30 DEG / 45 DEG.P.A.
FINISHING HOB PROFILE;STANDARD TOOTH,SEMI -TOPPING TOOTH,TOPPING TOOTH,STUB TOOTH,FELLOW STUB TOOTH,BS STANDARD,     
ROUGHING TOOTH PROFILE; PRE-S/ PRE-G, PROTUBERANCE TOOTH-PP/PGP, SEMI-TOPPING TOOTH-PS-PGS, PRE-SHAVING-GRINDING TOOTH-PSP/PGSP ,ROUGHING TOOTH, FULL TOPPING,FULL TIP RADIUS, ST+PB / TIP RELIEF / EXTRA START / SHOULDER 
2, MICRON DIA / FINE PITCH - GEAR HOBS - TOPPING / NON TOPPING-FROM -0.25 Module TO 2.0  Module
3,  ROLLER CHAIN SPROCKET HOBS -GROUND / UNGROUND - FROM -1/4" PITCH TO 3" PITCH
4,  TIMING BELT PULLEY HOB -TYPE; XL / L / H / XH / XXH / FLAT / HTD / AT / T / 8MM-H / 1/2"-L / DT etc.. 
 5  INVOLUTE SPLINE HOB-SERRATION HOB / STRAIGHT SERRATION HOB   PARALLEL SIDE SPLINE HOBS / FINISH SPLINE HOB / PREGRIND SPLINE HOB /   UNGROUND SPLINE HOB / WITH SHOULDER / WITH LUG ,/   WORM WHEEL HOB        AND ALL TYPE CUTTER AS PER DRAWINGS; 
6, HSS GEAR SHAPER CUTTER -STANDARD-MOD - 0.50 MOD  TO 30 MOD / DP -2DP TO 52 DP                               

7, HSS SPROCKET CHAIN GEAR SHAPER CUTTER -  FROM -3/8" PITCH TO 3/4" PITCH  
8, HSS INTERNAL SHANK TYPE  AND BORE TYPE GEAR SHAPER CUTTER -STANDARD & SPECIAL AS PER DRAWING

9, HSS INVOLUTE GEAR MILLING / RACK MILLING CUTTER - FROM 1Module TO 30 Module  

10, HSS GEAR SHAVING CUTTER 

11 Other Range of Products ;     GEAR CUTTING TOOLS & ACCESSORIES;  a) Konvoid Blades - Matl-M2-M35 (5% CO)& M42 (8% CO)  
b) Two Tool (twin) Generating Blades- (Bevel Generating Blades)- Matl-M2-M35 (5% CO)  STD & SPL AS PER DRAWING   c)  Carbide Ball PCD Pins
d)  Oerlikon Blades; Matl-M2-m3 & M35 (5% CO)
e)  Cutter Body Bolts
f)   Parallel (Spacers) 

Gear Shaper Cutter

Gear Shaper Cutter

DEAR CUSTOMER, 

We take this opportunity to introduce ourselves as stockiest/manufacturers of below listed GEAR CUTTING TOOLS items in Machine relieved and Ground Relieved from High Speed Steel.- IMPORTED MATERIAL-M2 / M35/ M42/ ASP30-DELIVERY- IN  EX-STOCK / 2/4 WEEKS    
1,HSS GEAR HOBS CUTTER - STANDARD-MOD; FROM 1Module TO 30 Module  DP;1DP TO  100DP - IN 20DEG / 14.5 DEG / 30 DEG / 45 DEG.P.A.
FINISHING HOB PROFILE;STANDARD TOOTH,SEMI -TOPPING TOOTH,TOPPING TOOTH,STUB TOOTH,FELLOW STUB TOOTH,BS STANDARD,     
ROUGHING TOOTH PROFILE; PRE-S/ PRE-G, PROTUBERANCE TOOTH-PP/PGP, SEMI-TOPPING TOOTH-PS-PGS, PRE-SHAVING-GRINDING TOOTH-PSP/PGSP ,ROUGHING TOOTH, FULL TOPPING,FULL TIP RADIUS, ST+PB / TIP RELIEF / EXTRA START / SHOULDER 
2, MICRON DIA / FINE PITCH - GEAR HOBS - TOPPING / NON TOPPING-FROM -0.25 Module TO 2.0  Module
3,  ROLLER CHAIN SPROCKET HOBS -GROUND / UNGROUND - FROM -1/4" PITCH TO 3" PITCH
4,  TIMING BELT PULLEY HOB -TYPE; XL / L / H / XH / XXH / FLAT / HTD / AT / T / 8MM-H / 1/2"-L / DT etc.. 
 5  INVOLUTE SPLINE HOB-SERRATION HOB / STRAIGHT SERRATION HOB   PARALLEL SIDE SPLINE HOBS / FINISH SPLINE HOB / PREGRIND SPLINE HOB /   UNGROUND SPLINE HOB / WITH SHOULDER / WITH LUG ,/   WORM WHEEL HOB        AND ALL TYPE CUTTER AS PER DRAWINGS; 
6, HSS GEAR SHAPER CUTTER -STANDARD-MOD - 0.50 MOD  TO 30 MOD / DP -2DP TO 52 DP                               

7, HSS SPROCKET CHAIN GEAR SHAPER CUTTER -  FROM -3/8" PITCH TO 3/4" PITCH  
8, HSS INTERNAL SHANK TYPE  AND BORE TYPE GEAR SHAPER CUTTER -STANDARD & SPECIAL AS PER DRAWING

9, HSS INVOLUTE GEAR MILLING / RACK MILLING CUTTER - FROM 1Module TO 30 Module  

10, HSS GEAR SHAVING CUTTER 

11 Other Range of Products ;     GEAR CUTTING TOOLS & ACCESSORIES;  a) Konvoid Blades - Matl-M2-M35 (5% CO)& M42 (8% CO)  
b) Two Tool (twin) Generating Blades- (Bevel Generating Blades)- Matl-M2-M35 (5% CO)  STD & SPL AS PER DRAWING   c)  Carbide Ball PCD Pins
d)  Oerlikon Blades; Matl-M2-m3 & M35 (5% CO)
e)  Cutter Body Bolts
f)   Parallel (Spacers) 
We now request you to forward your valued enquiries to us, which will receive our prompt attention.
 

Shank Type Sharper

Shank Type Sharper

Dear customer, 

we take this opportunity to introduce ourselves as stockiest/manufacturers of below listed gear cutting tools items in machine relieved and ground relieved from high speed steel. - imported material-m2 / m35/ m42/ asp30-delivery- in  ex-stock / 2/4 weeks    
1,hss gear hobs cutter - standard-mod; from 1module to 30 module  dp;1dp to  100dp - in 20deg / 14. 5 deg / 30 deg / 45 deg. P. A.
finishing hob profile;standard tooth,semi -topping tooth,topping tooth,stub tooth,fellow stub tooth,bs standard,     
roughing tooth profile; pre-s/ pre-g, protuberance tooth-pp/pgp, semi-topping tooth-ps-pgs, pre-shaving-grinding tooth-psp/pgsp ,roughing tooth, full topping,full tip radius, st+pb / tip relief / extra start / shoulder 
2, micron dia / fine pitch - gear hobs - topping / non topping-from -0. 25 module to 2. 0  module
3,  roller chain sprocket hobs -ground / unground - from -1/4" pitch to 3" pitch
4,  timing belt pulley hob -type; xl / l / h / xh / xxh / flat / htd / at / t / 8mm-h / 1/2"-l / dt etc. .  
 5  involute spline hob-serration hob / straight serration hob   parallel side spline hobs / finish spline hob / pregrind spline hob /   unground spline hob / with shoulder / with lug ,/   worm wheel hob        and all type cutter as per drawings; 
6, hss gear shaper cutter -standard-mod - 0. 50 mod  to 30 mod / dp -2dp to 52 dp                               

7, hss sprocket chain gear shaper cutter -  from -3/8" pitch to 3/4" pitch  
8, hss internal shank type  and bore type gear shaper cutter -standard & special as per drawing

9, hss involute gear milling / rack milling cutter - from 1module to 30 module  

10, hss gear shaving cutter 

11 other range of products ;     gear cutting tools & accessories;  a) konvoid blades - matl-m2-m35 (5% co)& m42 (8% co)  
b) two tool (twin) generating blades- (bevel generating blades)- matl-m2-m35 (5% co)  std & spl as per drawing   c)  carbide ball pcd pins
d)  oerlikon blades; matl-m2-m3 & m35 (5% co)
e)  cutter body bolts
f)   parallel (spacers) 
we now request you to forward your valued enquiries to us, which will receive our prompt attention.
 
thanks and kind regards  

Other products & services we offer
Bevel Genrating Cutter Blade
Fine Pitch Hob Cutter
Gear Cutting Tools
Internal Shaper Cutter
Involute Milling Cutter
Multi Start Hob Cutter
PS-ST Hob Cutter
Pregrind Hob Cutter
Preshave Hob Cutter
Semitopping Hob Cutter
Spline Hob Cutter
Timing Pully Hob Cutter
Topping Hob Cutter
Sprocket Hob Cutter
Milling Cutter
Form Cutter
Serration Hob Cutter

 
 
 

Indiamart

Terms of Use - Privacy Policy - Link to Us

Copyright © 1996-2014 IndiaMART InterMESH Ltd. All rights reserved.