Portable Cooling, Filtration & Forced Lubrication System as addon to the existing system for emergency purpose. Can be also used as Unloading of Fuel Oil

Poly Propelene Pump

Small size bare monoblac poly propelene pumps.
Fitted with seal gland or PTFE bellow Mechanical seal.
Shaft is of SS-304 316 with ceramic coating and PTFE coating optional
Very economical models as pumps made with minimum parts.
Very easy maintanance.
Casing are made from injection moulded poly propelene single piece
Impellers - semi open made from UHMW. Low NPSH performance.
Stuffingbox - made from UHMW, suitable for gland packing and PTFE bellow mechanical seal
Shaft SS-316, Protected by Shaft sleeve of Alloy - 20 OR Alumina filled PTFE or ceramic.

Sanitary Pump

Milk, Cream, Butter Milk Condensed Milk
Fruit Juice, Beer, Wine, Sugar Syrup
Vitamin Solutions, Sugar and Confectionery.
R O Water, DM water, Pure Water.
Water for Injection WFI
Vegetable Oil, Mineral Oil, Lub Oil etc.
Pharmaceutical Formulations, Syrup etc.
Alkaline Solutions Alcoholic Drinks
Acids, Fine Chemicals
Bottling Plants, Soft Drinks and Distillery
Food Processing Liquid Food Stuffs
Water Treatment Plats
Colour dyes and Pigments Paints
Descaling Applications, Paper and Cement Industries
Detergent, Soaps, Paste and Shampoo
Textile Sizing, Dyeing and Finishing Systems
Natural Cellulose Fiber Synthetic Fiber System
Hot and Cold Water Pumping.

Back Pullout Pumps

More than 3mm corrosion allowance cast iron for extended use on corrosive applications.
Back-pull-out construction allows rotating assembly to be with drawn without disturbing the suction and delivery connections.
one piece self vanted foot mounted, center suction volute casting, single stage, closed semi open dynamically balanced impeller.
Flange drilling standards as per DIN 24255 ISO 2858 or as per customer's requirement.
Designed for 16 bar working pressure with optional casing for a working pressure of up to 20 bar.
A robust and solid construction that guarantees long life even under high suction pressure conditions.
Heavy-duty, deep-grooved bearings with minimum 50,000 hours operating life under normal condition. Grease lubricated, oil lubrication available on request.
Heavy-duty, stiff solid shaft design with low L3 D4 ratio ensures less than 0.05mm shaft deflection at the seal face in all operating condition. This extends the seal life.
Seal housing is constructed to accommodate different seal gland designs, so as to meet the severe heavy-duty requirements.
Excellent parts interchangeability reduces inventory levels for spare parts to a minimum.
Special design for high temperature thermic fluid available in request

Self Priming Pump

All Wetted Parts Of Pumps Are Made From Lost Wax Process investment Casting), So Execellent Surface Finish, Smooth Flow Path Hydraulic Passage And No Casting Defects Like Blow Holes, Cracks Etc
Centripetal Regenerative Impeller For Better Suction
Pumps Will Be Normally Available In CF-8m Gun metal, Alloy-20 And Also In Other Material As Per Customer's Requirements.
Single multistage Pumps To Handle Crystal Clear Liquids For High Pressure Duties.
Very Quick Priming, No Need Of Foot Valves
Very High Suction Capacity Up to 8 Meters Without Much Noise.
Various Types Of Sealing Arrangements As Per Customer's Liquid Characteristics. Normally Fitted With Carbonceramic Seal Faces With PTFE Cup And Viton Rubber.
Pumps Are Available In Monobloc And In Bare Type, Also With Flameproof Motor. All Motors Are Of "TEFC" Type
Pump Can Be Offered With Electropolishing For Some Special Requirements.
Able To Handle Temperature Up To 80º C.
Trolley mounted available.
Also available with 120 Volt 60 Hz.
Custom built pumps available.