Home » What We Offer » Chemicals

Chemicals

As a well known supplier and trader of Chemicals we are always providing the best product to theclients so as to the utmost customer satisfaction can be obtained. We have the best technical support team for checking the quality of the product.

Product are mention below:

Aniline Oil

Specifications:

Aniline purity	99. 9% by w t,min.
Nitrobenzene	2ppm by wt. ,max.
Water	0. 1% by wt. ,max
Colour	apha100 max. ,at the time of loading into the road tanker or at the time of drum filling
Cas no	62-53-3
Un no	1547

Uses:

Rubber chemicals
Antioxidants
Accelerators,
Vulcanising agents
Photographic chemicals : hydroquinone
Dyes & dye intermediates : acetanilide, cyclo
Hexyl amine, aceto acetanilide, diethoxy aniline,
p-amino azo benzene, diethyle aniline, dimethyl
aniline, diphenyl aniline, sulphanilic acid, 2-5
dimethoxy aniline
pharmaceutical : analgin, isopropyl antipyrine,
sulpha drugs, oxyphen butazone, vitamin b2
Isocyanates : methylene diphenylene di-
Isocynate (mdi)
Others : explosives, pesticides, insecticides,
Herbicides, fingicides etc.

Packing & Supply

Road tankers or 200 kg net new steel barrels

Technology

The technology for aniline has been supplied by Dupont, USA

Send Enquiry

Methanol

Specifications:

ITEM	LIMIT	ANALYSIS M E T H O D
Appearance	Clear and free of	IMPC A 003-98
Appearance	Suspended matter	IMPC A 003-98
Purity % W/T on dry basis	min.99.85	IMPC A 001-02
Colour Pt-Co	max.5	ASTM D 1209-05
Water % W/W	max.0.1	ASTM E 1064-05
Distillation range at 760 m m Hg	max. 1.0° C to include	ASTM D 1078-05
	64.6° + 0.1 °C	ASTM D 1078-05
Specific Gravity 2 0 ° / 2 0 °	0.791 - 0 . 7 9 3	ASTM D 4052-02
Potassium Permanganate	min.60	ASTM D 1363-06
time test 1 5°C minutes	min.60	ASTM D 1363-06
Carbonisable substances	max.30	ASTM E 346-03
(Sulphuric Acid Wash Test)
Pt-Co Scale
Ethanol m g / k g	max.50	IMPC A 001-02
Chloride as CI mg /kg	max.0.5	IMPC A 002-98
Sulphur mg /kg	max.0.5	ASTM D 3961-98
Hydrocarbons	pass test	ASTM D 1722-04
Carbonilic Compound as	max.30	ASTM E 346-94
Acetone mg /kg	max.30	ASTM E 346-94
Acidity as Acetic Acid mg /kg	max.30	ASTM D 1613-06
Total Iron mg /kg	max.0.1	ASTM E 394-04
Non Volatile matter mg /1000 ml	max.8	ASTM D 1353-03
CAS No.	67-56-1
U.N. No.	1230

Technology

Low pressure, low temp technology from from ICI,UK

For more details kindly refer to the attached PDF.

Send Enquiry

Acetic Acid (Glacial)

Specifications:

Acetic Acid	99.85 % min. by wt.
Water	00.15 % max.
Colour	10 APHA max.
Formic Acid	00.05 % max. by wt.
Acetaldehyde	00.05 % max. by wt.
Heavy Metals as Pb	less than 2 ppm
Iodides	40 ppb max.
Permanganate	2.00 hrs. Min.
Freezing Point	16.4°C
Specific Gravity	1.049 at 25°C
CAS No.	64-19-7
UN No.	2789

Uses:

Acetic Acid is mainly used in the manufacture of following Chemicals

Acetic Anhydride
Vinyl Acetate Monomer (VAM)
Purified Terephthalic Acid (PTA)
Monochloro Acetic Acid
Acetates viz. Methyl Acetate, Ethyl Acetate, etc.
Dikelene Derivatives

Dyes & Dye Intermediates

Acetic Acid is used in textile industries for textile processing and printing.

Packaging and Supply

In Stainless Steel Tankers and in 30 kgs HDPE Carboys

Technology

GNFC is the only manufacturer in the Country to employ Methanol Route for manufacturing Glacial Acetic Acid using British Petroleum's Technology.

Send Enquiry

Formic Acid - 85

Specifications:

Total Acidity as HCOOH	85 % by mass min.
Water	Rest
Totallnsoluble Matter	To pass the test
Heavy Metals as Pb	20 ppm max.
Chlorides as CI	0.005% max, by mass
Non Volatile Matter	0,08% max. by mass
Sulphate as S04	0.005% max. by weight
Iron as Fe	50 ppm max.
Boiling Point	107°C
Melting Point	(-) 15°C
Specific Gravity	1. 192 at 25° C
CAS No.	64-18-6
UN No	1776

Uses

Formic acid is extensively used as a coagulant for obtaining rubber from latex. An auxiliary for delining and pickling of fur, fixing of dyes-in leather industry and in processing of textile industry, it is also used as an intermediate in manufacturing of basic drugs, plant protection agents, pesticides, vulcanisation accelerators, antioxidants and cleaning agents. Formic Acid also finds its use in preservation of silage and grams. It is also used in electroplating and can be as a solvent as well.

Packing And Domestic Supply

Formic Acid is available in 30 litre (35 kg) HDPE carboys and in S. S. Tankers.

Exports

Available in 35 kg HDPE carboys and 250 kg HDPE drums. In bulk it is also available in 20-23 mts. ISO Tanks. All the packings are UN/IMDG approved.

Technology

The Technology for Formic Acid Plant has been supplied by Kemira OY, Finland. GNFC produces high quality Formic Acid through Methyl Formate Route.

Send Enquiry

Weak Nitric Acid

In Weak Nitric Acid 61.5%, 68% & 72%.

Specifications:

HN03 Concentration : 61.5 + 0.5% by wt. Nitrous Oxide as HN02: 500 ppm max. Chloride as CI : 10 ppm max. Sulphate as H2S04: 50 ppm max. Arsenic as As : 2 ppm max. Residue on Ignition : 100 ppm max. Heavy Metal as Pb : To pass the test Specific Gravity at 25° C : 1.368

Uses:

Widely used in the manufacture of Ammonium Nitrate & other Explosives, Sodium Nitrate, Potassium Nitrate, Calcium Nitrate, Glyoxal, H-Acid, Nitrobenzene & other Nitro Derivatives, Dyes & Dye intermediates. Drugs & Pharmaceuticals, Pickling of Steel & Metallurgy, Acrylic Fibre, etc.
Due to better concentration (i.e. 61.5% as against 58-60% commercially available from other sources) end users get better yield for their finished products.

We also supply Weak Nitric Acid 68% and 72%.

Packaging and Supply

Supply in SS tankers.

Technology

GNFC employs state-of the-art production technology from UHDE, Germany.

Send Enquiry

Concentrated Nitric Acid

Specifications:

HN03 Concentration	98.5% by wt. min.
Sulphate as H2S04	200 ppm max.
Nitrous Oxide as HN02	500 ppm max.
Chloride as CI	10 ppm max.
Residue on Ignition	500 ppm max
Heavy Metal as Pb	To pass the test
Specific Gravity at 25° C	1.5
CAS No	7697-37-2
UN No	2031

Uses:

Widely used in manufacture of Organic Synthesis of (Dyes/Drugs / Explosives/Cellulose Nitrate/ Nitrate Salt), Nitro Benzene, Nitro Chlorobenzene, Aniline, TDI and other Nitro Derivatives, Nitro Toluene, Acrylic Fibre, Dyestuff and Dye Intermediates, Photo Engraving, Oxidizer in Liquid Rockets Propellants, etc.Due to low Nitrous and Iron content, it is ideally suited for Nitro-Glycerine based explosives and Nitro-Cellulose explosives manufacture.

Packaging And Supply

Supply in tankers made of Aluminium/ SS 6mm thickness (minimum).

Technology

Sophisticated Process Technology has been supplied by Plinke, Germany.

Send Enquiry

Nitrobenzene

Specifications:

Nitrobenzene Purity	99.7% by wt, min.
Di-Nitrobenzene	0.1%bywt., max.
Water	0.1% by wt., max.
Benzene	0.1% by wt., max
CAS No.	98-95-3
UN No.	1662

Uses:

Dyes & Dyes Intermediates

Benzidine, Nigrosine, Metanilic Acid, Magenta m Nitro Chloro Benzene, Induline, m-Di-Nitro Benzene, Quinoline
Pharmaceuticals : Phenyle Butazone
Pesticides : As solvent
Miscellaneous : Fluorescent whitening agent. Flavours & Cosmetics, Additives for High Press Lubricants

Packaging and Supply

MS road tankers.

Technology

Nitration technology provided by Chematur Engineering AB, Sweden.

Send Enquiry

Methyl Formate

Specifications:

Methyl Formate Content	92-97% by wt.
Methanol	Rest
Boiling Point Range	31° C to 31.5° C (70% Mixture to distill)
Density	0.96 gm/cc (25° C)
Vapour Density	2.07
Vapour Pressure	1.9 bar at 50° C
Ignition Limit	5 % to 23 % at 100% Methyl Formate Concentration
Auto Ignition Temperature	465° C
FlashPoint	(-)19° C
Threshold Limit Value (TLV)	100 ppm
Reactivity	Contact with strong oxidizers may cause fire and explosions
CAS No	107-31-3
UN No.	1243

Uses:

Methyl Formate is used as a raw material in manufacture of Di Methyl Formamide ( DMF ),in Pharmaceuticals and in Metal Foundries. It is also used as a Fumigant and Larvicide for Tobacco. It is also used in Organic Synthesis and in formulation of Synthetic Flavours. It is used as a Cellulose Acetate Solvent for Anisotropic Cellulose Acetate Fibres spun in a modified Dry Spinning Proces.

Packaging and Supply

In 200 litre drum with epoxy lining or in suitable roads tankers

Exports

In UN/IMDG approved epoxy coated MS drums.
Bulk in 20 KL ISO tank containers.

Technology

The Technology has been supplied by Kemira OY, Finland.

Send Enquiry

Toluene Di Isocyanate(TDI 80:20)

Specifications:

Apperance	Clear liquid
APHA colour, max.	25
Sp. Gr(at20°/20°)C	1.22+0.02
Purity (% by wt.), min.	99.7
Isomer Content (% by wt.)
2,4 TDI	80 ± 1
2,6 TDI	20 ± 1
Total Acidity (ppm. by wt), max.	40
Hydrolyzable Chlorine (ppm.by wt.)	Max 80
Total Chlorine (ppm. by wt.) max.	700
CAS No.	584-84-9
UN No.	2078
Haz. Class	6.1
IMDG code page	6269

Uses:

Flexible Polyurethane Foam (moulded)
Mattresses, Pillows & Quilts
Furniture cushion
Automobiles : Seats, Furniture, Lining, Sun visors,
Padding & Lining : Garments, Shoes, Diaries,
Carpets, Brief Cases, Bags, Purses etc.
Acoustic Insulation
Industrial Gaskets
Protective pads for Sports & Medical use
Industrial, Automobiles & Household Filters
Paint Rollers
Packing : Electronic items. Frozen Foods,
Medicines, Audio-video Computer Cd's
Applicators : Shampoos, Wax, Shoe Polish,
Household Chemicals
Cleaning Tools for pipelines and tubes
Miscellaneous : Toys, rakhi etc.
Any type of cushioning

C.A.S.E.

Coating
Adherasive
Sealants
Elastomer

Packaging and supply

250kg net in net steel drum

Technology

The technology has been supported by the Duport, USA

Send Enquiry

Ammonium Nitrate (Melt)

Specifications:

Concentration as Ammonium Nitrate	90-94 % by wt.
Calcium as CaO	0.5% by wt. Max.
PH of 10% Solution	40729
Specific Gravity	1.44
CAS No	6484-52-2
UN No.	1942

Uses

Widely used in the manufacture of Fertilizers like Calcium Ammonium Nitrate and Ammonium Nitro Phosphate, Explosives, Pharmaceuticals, Pyrotechnics, Herbicides and Insecticides, as Absorbent, Ingredient of Freezing Mixture, Nutrient for Antibiotics and Yeast.Due to less Calcium content, better suited for explosives manufacture.

Packaging and Supply

Supply in SS tankers

Technology

It employs UHDE Technology.

Send Enquiry

Catsol

Jointly developed an efficient H2S removal process and have patented under the name of 'catsol'"the catalyst for this process has been developed inhouse by our research and development department. The process and catalyst have been successfully tested at oil and natural gas commission, hazira, where they have india's largest gas processing complex. 'catsol has also won numerous awards for its eco- friendly properties.

Industries served

Refineries, power plants, natural gas processing, bio-sludge treatment units,sulphur based chemical units, etc.

Technology

GNFC and engineers india ltd. Have jointly developed 'catsol' process & technology for removal of hydrogen sulphide from lean sour gas streams.

Send Enquiry

Phthalic Anhydride

Specifications:

SR. NO	PROPERTIES	METHOD NO	UNIT	MAX/MIN	SPECIFICATION
1	Physical Appearance				Snow white free flowing flakes
2	Colour of molten material	ASTM D-3366-95 Reapproved2003	APHA	Max	20
3	Colour of molten material at 250 oC for 90 minutes	ASTM D-3366-95 Reapproved2003	APHA	Max	60
4	Solidification point	ASTM D-6875-08	0 C	Min	130.8
5	Purity as C8H4O3 ( by GC )	WI/QCL/043	% wt	Min	99.80
6	Maleic Anhydride & other oxidisable impurities	WI/QCL/043	% wt	Max	0.05
7	Ash Content	ASTM D-5347-95 Reapproved2006	ppm	Max	50*
8	Iron Content	WI/QCL/031	ppm	Max	2*

Applications:

Phthalate Plasticizers
Alkyd Resins
Unsaturated Polyester Resins
Copper Phthalocyanine Blue
Dye Stuff, Pigments etc.

Packing:

Phthalic Anhydride from IGPL is available in flakes in hdpe woven bags with inner liner of 25 kg. weight.

Send Enquiry

Maleic Anhydride

Specifications:

SPECIFICATION OF MALEIC ANHYDRIDE
PROPERTY	TYPICAL	GURANTEED
Physical Appearance	White Flakes	White Flakes
Colour of molten material (APHA)	10	20 MAX
Crystallisation Point (°C)	52.4	52.4
Purity of Male. Anhydride (C.,H,0,)	99.7	99.5
Prea Acichly as C,F, (COON)(%.WT)	0.2	0.2 MAX

Packing:

Maleic Anhydride from MPCL is available in flakes in hdpe woven bags with inner liner of 25 kg. weight.

Application:

Maleic anhydride is an important industrial chaemical for the manufacture of :
Unsaturated polyester resin used in reinforced plastic paints, buttons , putty etc.
Alkyed resins for paints , varnishes and inks.
Easters used in plasticizers for polymethacrylate polystyrene and pvc.
Tetra-hydro phthalic anhydride used in the manufacture of epoxy resins, poly-ester resins and alkyed resins.
Endomythylene tetre-hydro phthalic anhydride used in the manufacture of alkyd resins.
Rosin adduct used in the manufacture of paper sizing agents.
Endoxohexa-hyrophthalic anhydride used in the manufacture of paper sizing agents.
Other miscellaneous chaemicals.

Send Enquiry

Titanium Dioxide (All Grades)

Available with us a wide assortment of Titanium Dioxide in all grades(Titanium Dioxide Anatase ISI,Titanium Dioxide Rutile RC 822,Titanium Dioxide Rutile 800 PG,Titanium Dioxide Rutile RD - 01) and in different technical specifications.

For more details kindly refer to the attached PDF.

Send Enquiry

Toluene

We provide toluene that is appreciated by the clients for the special features such as accurate composition, non-toxic and eco-friendly in nature. In order to maintain the purity, we offer the toluene in various packaging according to the specifications and of our clients. Also known as methyl benzene or toluene.

We are the authorized dealer of the Reliance Industries ltd.

Send Enquiry

Mix Xylene

We are one of the prominent formulators and suppliers of mix xylene solvent. This is made of premium grade basic ingredients and extensively used in the rubber, leather and printing processes. Our xylene solvents are widely appreciated for the chief properties like sweet odor, inflammable, colorless and non-toxic.

We are the authorized dealer of the Reliance Industries ltd.

Send Enquiry

Meta-toluene Diamine (MTD)

Specifications:

MTD	98.5% by w t. min.
OTD	0.3% by wt. max.
Toludine	0.05% by w t . , max.
DNT	0.1 % by wt, max
H20	0 . 1 % by wt., max
H20	Including MTD
Tararound	3%
CAS No.	95-80-7
UN No.	1709
Haz. Class	6.1

Applications:

As an intermediate, as Monomer, chain extender, cross linker or intermediate, use in rubber chemical and dyes, use in polyamides/polymides

Packaging and Supply

200 Kg net in new Steel barrels.

Send Enquiry

Ortho-toluene Diamine (OTD)

Specifications:

OTD (Ortho Isomers)	99.5% min. by w t .
MTD (Meta and Para Isomers)	0.7% max. by w t .
Total Toluidine (Ortho,	0.3% max by w t .
Meta and Para)
Moisture	0.5% max by w t .
CAS No.	mixiure*
UN No.	3077
* 6 0 % 3,4 Diomino Toluene	CAS:496-72-0
4 0 % 2,3 Diomino Toluene	CAS:2687-25-4