Automatic Drain Valves

Automatic drain valves LDV series manufactured by us is at par with the prevailing industry standards and set norms. These automatic drain valves manufactured by us helps in purifying air by removing oil, moisture and dirt. We offer these valves in various customized sizes as per the demands of our clients.

Features -

• Latest in drain valve technology.
• Electronically senses condensate and activates valve.
• No air loss and is extremely economical to operate.
• Status indicator.
• IP 65 protection.
• Test button for quick check.
• No noise as air is not discharged.
• Capable of draining oily condensate.

Model -

1. LDV - 1000
2. LDV - 2000
3. LDV - 3000

Specifications -
                           LDV -1000  LDV -2000   LDV -3000

*  Working pressure -
       Maximum       10 kg /cm^2         16 kg/cm^2  
       Mininimum                2 kg / cm ^ 2
*  Capacity  -  upto   250 cfm     1000 cfm    2000 cfm
*  Weight   -          1.25 kg         3.2 kg           12 kg
*  Voltage -                    AC 50/60 Hz , 1 Ph 
*  Power -                          12 watts
*  Valve Orifice -        4 mm         15 mm       15 mm.

Automatic drain valves for railways offered by us are an excellent blend of latest technology and innovative designs. These automatic valves are used to discharge liquid contaminants from air receiver and/or centrifugal air filter with coalescer through dual exhaust ports in the locomotive. Further, we design automatic drain valves with integral drain / shut-off feature to manually exhaust contaminants.

Key features:

• Easy to install

• Rugged in construction

• Requires low maintenance

 

 

Product specifications:

 

• Available with integral drain/shut-off feature

• Available with heater assembly

  Specification

		Model
Specification	Glade	LDV -2	LDV -3	Unit
Maximum Working Pressure	10	16	16	Kg/ cm²
Minimum Working Pressure	2	2	2	Kg / cm²
Maximum discharge Quantity	135	135	535	liters/hr
Temperature (Ambient)	Jan-60	Jan-60	Jan-60	°C
Class of protection	IP 65	IP 65	IP 65

CTD series valves are timer based automatic drain valves. The valves are specially designed for dirty condensate. The controller is designed for dirty and harsh outdoor conditions. The valve has a large orifice and special solenoid operator section to discharge contaminated condensate. Should the valve still get clogged you can service it without removing from line. Press the knob at the bottom of the valve to mechanically clear all the sludge. Electronically flush a few times and now it is fully serviced and ready to use.

FEATURES  -

All new Mechanical clean function Proven Reliability All digital Electronic Circuit for time control Water proof IP 55 enclosures, ideal for outdoor installations Adjustable Drain and Cycle times

SPECIFICATION -                                                              Voltage -             230 V AC / 50 Hz / 1 Ph Power   -                   15 W max                      Timings -       Cycle : 1 min to 60 min adjustable                          Weight  -                  250 grams                      Dimensions -            78  70  100