| Flow
Nozzles |
Flow Nozzles are mainly used in areas of high velocities in the closed
conduits where it will produce substantially smaller pressure drop.
MOC :
MOC : Flow Nozzle in SS 316, SS 304 and other on request
MOC : Piping in SS 316, SS304,ASTM-A106 Grade B, A335 Grade
P11,P22
End Connection : But Welded or flanged suitable to ANSI, BS, IS
and DIN flanges
Accuracy : ± 1 %
|
Venturi
Tubes
|
Venturi Meters are used to reduce permanent pressure loss
substantially.
Used for measurement of liquids, gases and steam flows in closed
conduits.
Line Sizes : From 15 NB to 600 NB . Higher Sizes on request
MOC: SS 316, SS 304, C.S and other on request
End Connection : Butt Welded or flanged ends suitable to ANSI,
BS, IS and DIN flanges
Accuracy : ± 1 %
|
Venturi Tubes
|
| Flow
Metering Systems |
Made Complete Flow Metering System with primary flow elements and
secondary devices such as Flow Rate Indicator / Totaliser, Differential
Pressure Transmitter, Recorder along with accessories shall be supplied
on request.
|
Orifice
Plates
|
Square Edged concentric Orifice Plates are precisely manufactured from
various materials as per standards.
Line Size : From 15 NB to 600 NB. Higher Sizes on request.
MOC :SS16, SS304, Hast-C Monel & Other on request .
End Connection : Suit to ANSI, BS, IS & DIN flanges.
Types : Concentric Square Edged, Conical Entrance, Eccentric and
other on request.
Accuracy : ± 1%
|
Orifice
Flange Assemblies
|
Orifice Plates Sandwiched between flanges forms Orifice Assemblies
Line Size : From 15 NB to 600 NB, Higher Sizes on request.
MOC : Orifice Plates in SS 316 SS 304, Hast- C Monel &
Others on request .
MOC : Flanges C.S. SS 304, SS 316 and others on request.
END Connection : As per ANSI , BS, IS & DIN Flanges.
Types : Flange, Corner & Radius Taps, Single and Double
Piece Carries as Orifice
Holding Rings and other types on request
Accuracy : ± 1.0 %
|
Restriction
Orifice Plate and Flange Assembles
|
Make Restriction Orifice Plates are used to create a desired pressure
drop across the Restriction Orifice Plate Restriction Orifice Plates
Sandwiched between flanges forms Restriction Orifice Flanges Assemblies.
Line Sizes, Materials and End Connections : Same as per Orifice Plates
and Orifice Flange Assemblies.
|
Secondary
Devices / Instruments
|
These devices are used to accept differential pressure signal in terms
of electronic input and converts it to display output in terms of flow
rate or quantity precisely.
|
Primary
Flow Elements
|
Primary flow elements produces a differential pressure signal which is
proportional to flow. These flow elements along with secondary
electronic instruments measures the flow rates of fluids flowing through
closed conduits precisely i.e. of liquids, gases and steam.
|
Integral
Orifice Assemblies
|
Integral Orifice Assemblies along with any electronic Differential
Pressure Transmitter is used for the measurement of small flow rates
precisely where high accuracy of flow rates is required. Integral
Orifice Assemblies may be directly mounted to any suitable differential
pressure transmitter and hence eliminates need of impulse piping
Line Sizes : 15 NB, 25 NB and 40 NB.
MOC : Orifice Plate in SS 316, SS 304 & other on request.
MOC : SS 316, SS 304, C.S. and other on request .
End Connection : Socket Weld, Screwed and Flanged ends with
meter run piping suitable
to ANSI, IS & DIN flanges
Accuracy : ± 1.5%
|
Integral Orifice Flange
Assembly
|
| Other
Products / Accessories |
- Isolation needle valve
- Manifolds( 2ways,3 ways, 5 ways, H type and T type)
- Condensate Pots
- Air Header
- Sythons
- Punsation dampers and snubbers
|
Quality
Our products deliver accuracy and reliability to the world's most demanding
processes and industries including chemical, oil and gas, power and energy,
water and wastewater, and many more, where product pedigree and instrument
reliability cannot be left to chance, we offer the most reliable selection
of non-moving part sensing solutions from off-the-shelf devices to custom
engineered systems.
Our Strengths
Infrastructure
We are equipped with the latest and the best machineries that is needed to
manufacture world class flow instruments. We have a pool of expert and
experienced engineers who act as a steel frame to support our
state-of-the-art manufacturing facilities.
Customer Satisfaction
Our mission is to be the most market driven, customer focused, low cost
provider of high quality flow control products to the various industries.
Our Custom crafted rapid delivered products are designed with a passion to
achieve 100% customer satisfaction. We share a long lasting and mutually
beneficial relationship with our clients and look forward to enter into
business deals with the serious players of the field.
