Triton Process Technologies

Overview

The AutoRAE Lite is a high-speed and low-operation-cost bump test and calibration station with data storage in Excel format. The AutoRAE Lite provides the lowest cost of ownership, and direct functional bump test indication of more than 700 monitors, all on one set of batteries.
In addition, the AutoRAE Lite operates on a low-pressure system with a built-in pump.
lowest cost of ownership on the market.
Full documentation storage.
12 second bump test.
Portable with battery option.
Full configuration of gas monitors.
Demand flow system eliminates accidental leaks.

Key Features


Fully automated bump and calibration
Bump test in 12 seconds
Full calibration in 2 minutes
Gas usage only 70 cm³ per bump test
Tamper-proof data files
Optional battery operation
Configures monitor
Molded rubber insert
“No gas flow” alarm
Demand flow system
USB cable for PC set up
12 volt power supply
SD memory card minimum 512Mb
Inlet filter

The huminator is one of the smallest and therefore one of the most suitable climate chambers available on the market for mobile as well as stationary applications. Humidity readings in the range from 5 to 95%rh can be determined quickly and efficiently stabilised. The built-in temperature control function generates temperatures in the range from 15° to 40°c. Using an appropriate reference, it is possible to carry out fast and easy humidity calibrations on the measuring instruments, probes and data loggers from testo and other manufacturers.





the desk-top instrument is ideally suitable for testing the performance of all types of material, electronic components and instruments under special climatic conditions. The timed programming function facilitates extensive automation of test runs and calibrations, since up to 3 humidity/temperature readings can be activated one after the other.

the time for this can be defined by the user.



some of the salient features are

can be programmed individually
user-friendly
lcd display
high adjustment speed
rs232 interface

The most advanced hand-held VOC detector on the market.

A pid with the standard four gases of a confined space monitor.

Key Feature

Available sensors: CO, H2S, O2, SO2



Explosion-proof 7R electrochemical sensor



4 to 20mA analog and RS-485 digital output of specified sensor



Explosion-proof enclosure for hazardous locations



Local displays with adjustment keys

Non-intrusive calibration



Magnetic key interface eliminates need to open explosion-proof housing when making calibrations or other minor adjustments

Operation at 9 to 36 VDC



Dry-contact output (<30V, 2A)

Hazardous Location Classification

UL, CUL: Class I, Division 1, Groups B, C, D Temperature Code T6

Key Feature

4-20 mA analog output ranging from 0.01 to 20.00 ppm isobutylene equivalent for ultra-sensitive version

Explosion-proof enclosure for hazardous locations

Long life 10.6 eV Ultraviolet lamp and 3D Sensor

Built-in pump with patented self-cleaning duty cycle operation
Local displays with adjustment keys

Magnetic key interface eliminates need to open explosion-proof housing when making calibration and other minor adjustments

Operation at 12 to 30 VDC

Dry contact output (Max 30V, 2A)

A one- to five-sensor gas detector equipped with a wireless RF modem.

A combination multi-gas and radiation detector equipped with a wireless, rf modem.

A combination multi-gas and radiation detector equipped with a wireless, RF modem.

An ATEX-certified multi-gas, wireless monitor.

The most advanced Compound-Specific Monitor on the market.

yes, as you may have found, ultrasonic flowmeters have many advantages over traditional flowmeters, but, they are just too expensive for many applications. Shenitech has spent many years on pushing the technology to its limit in order to cut the cost significantly without compromising the performance. We are now proud to present our latest innovation, the stuf-300ex series digital ultrasonic flowmeters, to our valued customers like you. Stuf-300ex product family includes stuf-300eb clamp-on ultrasonic flowmeter, stuf-300ec insertion ultrasonic flowmeter and stuf-300eg flow-cell ultrasonic flowmeter. All of them have better than 1% accuracy. All of them are priced significantly lower than competitors’ ultrasonic flowmeters.

Designed for installation at a fixed location for long-term flow measurement without maintenance, the STUF-300FxC’s insertion transducer provides strong signal strength and exceptional signal quality. Accuracy as high as 0.5% when in-situ calibration is available. Hoptapping installation without shutting down flow.

For flow measurement applications in rural area where electrical power is not accessible, our STUF-300Sx provides an ideal solution. It has a solar panel, a battery, and a low-power consumption high-performance ultrasonic flowmeter. All the components, except transducers, are housed in a weather - proof robust enclosure.

high accuracy, plug & play, excellent long-term stability and zero maintenance are the hallmarks of this innovative flowmeter. Parameters have been pre-programmed in the factory, so simply place the flow-cell into the pipe line and the flowmeter will be up and running right away.

testo 325-I is the introduction to affordable flue gas analysis for SO2. It combines precision with user-friendly operation and low costs. It is the ideal instrument for checking emissions and monitoring thermal processes.

User-friendly operation and handling – Large display
Gas sensor can be easily changed by the user
Magnetic SoftCase protects from dirt and impact
Built-in condensate trap protects instrument
Checks emissions in coal and heavy oil burners
Monitors flue gas desulphurisation systems
Process monitoring in the glass and ceramics industry
Prints readings with date and time

The testo 325-I CO high is your step to affordable flue gas analysis. Easy handling and low costs make it the ideal portable partner for • Checking the atmosphere of thermal processes in the production sector (funnel furnaces, hardening furnaces, smelting and annealing) • Adjusting process burners and gas motors. The readings are displayed constantly on the display for as long as the pump is running. • Gas sensors can be easily changed by the user • Instrument protection on account of detachable condensate trap

Prints readings on site with date, time
Special flue gas probe with 3 m hose

The testo 325-I CO high [O2] is your step to affordable flue gas analysis. Easy handling and low costs make it the ideal portable partner for • checking the atmosphere of thermal processes in the production sector (funnel furnaces, hardening furnaces, smelting and annealing) • adjusting process burners and gas motors. The readings are displayed constantly on the display for as long as the pump is running. • Gas sensors can be easily changed by the user • Instrument protection on account of detachable condensate trap

The readings are shown constantly in the display for as long as the pump as is running.
Gas sensors are easily changed by the user
Instrument protection on account of detachable condensate trap

with its maximum 95 °c operating temperature and nominal pressure of 1. 6mpa, the technical specifications meet the standard for residential meters. The high measurement dynamic allows a load of up to double the rating, thereby ensuring high operating security.

reliable ultrasonic flow measurement

the stuf-280tx uses transit-time ultrasonic flow measurement principle to measure the flow rate: opposite sending and receiving transducers send ultrasonic signals alternately with and against the flow direction. The flow rate can be exactly calculated from the difference between the two transit times. There is no moving part in the sensor. Thus, the measurement is wear-free and stable over a very long time period.

Next-generation BTU meter, designed for both residential and commercial applications, utilizes the latest technology in ultrasonic flow measurement. STUF-280T has no moving parts so it’s wear-free and stable over time. With a life span typically 15 years, STUF-280T features an automatic meter reading (AMR) system, allowing you to easily manage building resources.

The rapid response of a detector and the accurate dose measurement of a dosimeter.

A personal radiation detector to provide rapid detection of both gamma ray and neutron sources.

Technical specifications

accuracy- ±1. 0% of f. S.
ambient temperature- - 25°c to + 65°c
operating pressure- 75% of the scale value
protection- ip-65
joints-tig argon arc welding

The ToxiRAE 3 is a full-featured single-gas monitor that offers unequaled cost of ownership value. The ToxiRAE 3 is compatible with the AutoRAE Lite bump and calibration station. STEL, TWA, low, and high alarms can also be recorded. The detector is warranted for 2 years and maintenance free with replaceable battery.

Lowest cost of ownership on the market.
Rugged steel housing for harsh environments.
Fastest instrument response time on the market for better protection and worker safety.


Fastest bump station on the market with highest productivity, putting workers back to work quickly.
Compact, low-cost bump and calibration station enables the ability to put the bump capability where it is needed.

An excellent meter for highly accurate thermal energy measurement of a liquid-based thermal energy production / transferring system. Non - intrusive design means there is no pipe cutting, no moving parts, no pressure drop, no leaks and no risk of contamination. STUF-300R1B is a perfect tool for improving HVAC/building energy efficiency, energy production and transfer and for monitoring geothermal or solar-thermal systems.

Stufmanagertm pc software makes it very easy to connect a shenitech ultrasonic flowmeter to a pc through the rs-232 or rs485 link. The software automatically detects the com port used by the pc and talks to the flowmeter with minimum human interaction.

the pc software obtains real-time data from flowmeter and displays the data on a graphic interface. It also provides an easy to download data from the data logger of the stuf-200h handheld flowmeter. It converts the data into standard format which can be imported into excel for further data manipulation.

for a cost-oriented industrial company, compressed air consumption measurement with the testo 6440 offers the optimum possibility of investing in savings in compressed air and gradually cutting the high compressed air costs by implementing the following measures.

leak detection
allocation of consumption costs
peak load management
monitoring min. /max. Values
controlling consumption-dependent maintenance work

precise automatic metering of compressed air

Key Feature

Highly poison-resistant catalytic bead combustible gas LEL sensor



4 to 20mA analog and RS-485 digital output of 0 to 100%LEL combustible gas including methane, hydrogen or other combustible gases



Explosion-proof enclosure for hazardous environment applications

Local displays with adjustment keys



Non-intrusive calibration



Magnetic key interface eliminates need to open explosion-proof housing when making calibrations or other minor adjustments

Operation at 9 to 36 VDC



Dry-contact output (<30V, 2A)

Hazardous Location Classification

UL: Class I, Division 1, Groups B, C, D

Temperature Code T6

Infrared radiation cannot be seen by the human eye. However, all objects with a temperature above absolute zero (about -273 degrees Celsius) emit infrared thermal radiation. Thermal imagers can convert infrared radiation into electrical signals and thus render them visible. With the outstanding image quality of our imagers, you see even the smallest temperature differences.

Specifications :



Accuracy: ±0.5% of the value displayed. ±0.3% is selectable
- Caliber: DN10～DN3000mm (3/8"～120")
- Nominal Pressure: 0.6～4.0MPa
- Liner material: Teflon, PFA, F46, Neoprene, Polyurethane.
- Electrode type: General type, scraper type or replaceable type.

- Electrode material: 0Cr18Ni12M02Ti, Hastelloy B, Hastelloy C, Titanium,

Tantalum, Platinum-iridium, Stainless steel covered with tungsten.

Medium temperature
Integral type:-100°c～+800°c
Remote type: Neoprene & Polyurethane Liner -10°c～+80°c
PTFE, PFA, F46 Liner -100°c～+1600°c
- Ambient Temperature: -250°c～+600°c

- Ambient Humidity: 5～100%RH (relative humidity)
- Medium Electrical conductivity: ≥15ūs/cm standard. ≥5ūs/cm upon request.
- Measuring Range: 1500:1, flow rate≤15m/s
- Structure Type: Integral type, remote type, submersible type, ex-proof type.
- Protection Class: IP65 standard. IP68 optional.



IP65: dustproof and watertight:
IP68: dustproof and submersible for long term (only for remote type)
- Product Standard: JB/T9248-1999 Electromagnetic Flowmeter

A rugged, battery-powered toxic gas detector integrated with a wireless mesh radio modem.

The most advanced ultrasonic flow measurement technology available, STUF-280W is a cost effective water measurement solution for a wide range of commercial and residential applications. A high measurement dynamic and no moving part in the sensor offer wear-free water measurement, precision, stable operating security and long service life.

A one-to-four gas monitor fordetection of combustibles, oxygen, hydrogen sulfide, carbon monoxide, or sulfur dioxide.

A multi-channel controller for wireless mesh network products.