Industrial Equipment

Our clients can avail from us a wide range of Rotary Atomizers, which is developed in tandem with the set industry norms. The required droplet size distribution is important to any successful spray dryer operation to ensure that all the powder specifications are met successfully. Atomization is a high technology area, in which we have introduced the use of various nozzles and rotary atomizers in spray drying. We have expertise in manufacturing atomizers for almost all products like dyestuff. dairy products, pharmaceuticals, food products, optical whiteners, ceramics, and detergents.

Features :

• Handling of high feed rates without need for atomizer identical arrangements
• Handling of abrasive feeds
• No blockage problems
• Low pressure feed system
• Ease of droplet size control through wheel speed adjustment
• Optimization of particle size of dried material

Request for Quotation

With the assistance of our professionals, we are involved in offering technologically advanced range of Hot Air Generators. Manufactured in compliance with the international quality standards, these are offered in various material of construction, temperature range and capacity. Our entire range  of Hot Air Generator can be offered in both standard and customized finishes as per the clients specific requirements.

Request for Quotation

We manufacture, export and trade a wide range of Rotary Airlock Valves, which finds application in various engineering related industries. Known for their high functionality and sturdy construction, these are used to discharge dust particles from cyclomax hopper/ bag filter. Furthermore, it also helps in maintaining the operating pressure in the system. Available in various sizes and capacities, these Rotary Airlock Valves are offered at industry leading prices.

Technical specifications :

• Service Temperature: 100°C, 250°C, 400°C
• Differential Pressure: 1500 mm WG (Theoretical)
• Drive Arrangement: Chain drive, Direct drive
• Rotor Types: Fixed rotor (C.I.), Adjustable tip rotor (fabricated)

Size : 8” RAV

• Valve capacity: 3.53 m3/hr at 50% filling efficiency and 20 rpm
• Overall Dimension: Dia. 222 mm. x325 mm height

Size: 14” RAV :

• Valve capacity: 26.7 m3/hr at 50% filling efficiency and 30 rpm.
• Overall Dimension: Dia. 350 mm. x 525 mm height

Request for Quotation

Backed by state-of-the-art-manufacturing unit, we are involved in offering a wide range of Feed Screw Pumps. These are used to handle liquid with different viscosity, especially the thick medium, which is difficult to transfer, liquid with different concentration and dry material, which is separated and dehydrated. Also, these  Feed Screw Pumps are suitable for liquid, which contains solid particle, fibre and suspended matter, mixture of liquid, gas and solid and liquid, which could not be mixed, cut and rob including corrosive liquid.

Features :

• Can easily transfer all flowing medium and non-running material
• It has steady flow and pressure, no pulsation
• Change the speed, so the output flow be modified
• It could be used in measuring input
• It has strong inhale power, low working noise, no leak and temperature rising

Request for Quotation

Our clients can avail from us an extensive range of Industrial Blowers, which are provided with backward inclined blades ( PB TYPE ) / radial blades ( HP TYPE) / backward inclined with radial tip blade ( EX / EY / EZ / EW TYPE). The blades depends upon the combination of capacity, static pressure and application of fan. As per the clients need, we offer fans with blades having aerofoil section blades ( TE series), having 85% efficiency. Further, TE centrifugal fans are equipped with radial blades for providing high pressure.

Features:

• Backward inclined with radial tip fans can be offered for pressure upto 500 mmw
• All single inlet Centrifugal Fans shall be supplied in Arrangement.# 1A , 3 ,4, 7 , 8 as per AMCA std. depending upon the application of fans
• Fans with inlet box with bearing outside of air stream
• The bearings are long life and suitable for continuous operation
• Bearing can be either grease lubricated or having oil bath depending upon the speed and size of bearing
• Fans available with sleeve bearings
• We also offers 2 fans in series to achieve higher static pressure upto 2200 mmwc
• Fan in series means outlet of one fan will be connected to inlet of other fan to achieve required static pressure.

Request for Quotation

With our expertise in the respective field, we are involved in offering Feed Filters. Manufactured in using SS media and designed with perfection, these are provided with optimum number of pleats and improved area of filtration. The filter elements provided ensures maximum removal ratings making it suitable to be used for different applications. Furthermore, these Feed Filters are also used for high and low viscous fluids as well as all types of gases.

Features :

• Ability to withstand for maximum operating fluid temperature of upto 240°C.
• Pleated construction small sizes to handle more filtration flow volume
• Special sizes and end cap configurations of filter elements are also available

Request for Quotation

Our organization offers Electromagnetic Hammers, which are available in different models. These electromagnetic hammer are designed to be used in hazardous and flameproof area. Available in various technical specifications, such as volt rates, pulse currents and weights, these hammers caters to the requirements of Chemical & Pharmaceutical, Cement & Mining industries.

Request for Quotation

• Nozzle Body
• Orifice Seal
• Orifice Disc
• Swirl Chamber
• Chamber End Plate
• Body Seal
• Female Adoptor

Request for Quotation