We design and manufacture a range of double & single tube fittings that are available in Stainless Steel, Carbon Steel, Brass, Monel, Haste Alloy, Inconel, etc. Our products find their application in a number of industries like : process control, instrumentation, hydraulic & pneumatic applications in chemicals & petrochemicals, fertilizers, offshore, power plants, automobile and other process industries.

We offer these fittings in various dimensions ranging from 2mm to 50mm, 1/16" to 2" and nominal bore sizes from 1/8" to 1.1/2" NB, with variety of end connections according to BSP, NPT, BSPT, METRIC, UNF, or any other thread standard. The raw materials like steel and alloys are procured from genuine sources with check tests conducted by neutral inspection agencies. Total accuracy in manufacturing and quality is maintained through the use of thread and gap inspection gauges, which are regularly calibrated. We give surface protection to these fittings to make them durable and have longer life. The range includes Double Ferrule (Swagelok Type), Single Ferrule (Parker Type) & DIN-2353 (Ermeto type).

We bring for our clients an array of pipe fittings that are machined from bar stock or forgings in 316 stainless steel or any other material of construction required. We carefully design these fittings to meet the requirements of ANSI B 31.1 Power Piping Code, ANSI B31.3 Chemical Plant and Petroleum Refinery Piping, and Section VIII of ASME Boiler & Pressure Vessel Code. These fittings come with protective end caps that prevents the exposed threads from getting damaged.

Our range of pipe fittings are available in different materials like: Materials : 316 Stainless Steel Forgings, ASTM A-182, 316 Stainless Steel Bar Stock, ASTM A-479, Brass, Monel, Haste Alloy, Inconel, etc. Our products come in a variety of shapes and sizes. Couplings, elbows, bushings, caps, adapters, plugs, nipples, tees & crosses are designed to fit most applications.

We fabricate and offer an array of vacuum fittings that are used to connect /disconnect without affecting seal performance. We have used high quality raw materials like stainless steel, flurocarbon, etc. for the manufacturing purpose. The technical specifications of the vacuum fittings are as follows:

• Temperature Rating : Standard fluorocarbon O Ring - 25 O F to 400 O F (-32 O C to 200 O C)
• O-Ring Sealant: O-Ring wetted with a thin film of silicone vacuum grease. Replaceable O-rings should be wetted with lubricants or sealants compatible with the system.
• Testing : The TUBEFIT Ultra-Torr design has been tested to a helium leak rate of 4 x 10 -9 std cm 3 /S.

Our array of weld fittings join tubing or pipe to the adapter by butting the material to the fitting or by inserting the tubing or pipe into a socket in the fitting. Only Type 316L Stainless Steel should be specified for weld fittings. This low carbon stainless steel (denoted by the suffix "L") minimizes post-welding corrosion called inter granular corrosion. Our products provide permanent welded connections for critical applications involving corrosive fluids, shock from pressure surges, temperature cycling, and system vibration.

Pre-assembly before welding: A unique feature of our range of weld fittings and adapters is a tapered tube socket that facilitates system assembly. The taper holds the tubing in place prior to welding, allowing pre assembly of several tubing runs.

Technical Information : The choice of fitting material and material being welded is critical. Using the same materials will ensure the same coefficients of expansion, reducing the possibilities of poor welds, out-of-roundness or dimensional changes that are detrimental to a good weld connection.

Standard material is 316 Stainless Steel (SS). Fittings made from barstock are manufactured from materials in accordance with ASME SA-479 and ASTM A-276. Shaped fittings are manufactured from material in accordance with ASME SA-182 and ASTM A-314. Pipe threads meet or exceed requirements of ANSI B1.20.1 (NPT) and MIL-P-7105 B (ANPT) for tapered pipe threads.

Pressure Ratings : Pressure ratings is calculated in accordance with pressure piping code ANSI B31.1. All working pressures listed are at 4:1 safety factor for 316 stainless steel.

We design and manufacture a range of needle valves that are made from high quality raw materials. These needle valves are durable, long lasting and yield better efficiency. Our range of needle valves include:

• Bar Stock Needle Valve
• Forged Needle Valve
• High Pressure Needle Valve
• Brass Needle Valve
• Gauge Screw Bonnet Needle Valve

We put forth a wide spectrum of gauge valves that are precision manufactured. These valves are made from premium quality raw materials under the guidance of expert engineers. These valves are available in various shapes and sizes and are offered as per the clients' specifications.
The technical details about the product and its components are as mentioned below:

• Screwed bonnet design
• Bonnet : Back seated blow out proof
• Spindle: Ground and thread rolled
• Spindle lip : Non rotating tip shut off type stellited, regulating stellited and soft seated.
• Bonnet Pusher: Silver plated for anti galling freezing for increased stem cycle life