Industrial Copper Fittings

We offer our customers a wide range of single/double layer, plain and plastic coated and special finish copper coils for diverse applications. These tubes are manufactured with an outside diameter tolerance of +0.0/-0.08mm (0.003”), annealed at approximately 600°C, giving a hardness range of 45/60 HV5. Dimensional Range

1. Outer Diameter - 3.15 mm to 22.00 mm
2. Wall Thickness - 0.45 mm and above.
3. Length: between 5 meters and 30 meters.
4. Available in single / double layer to match the requirement.

Other Features

• Characterized by a bright, clean and dry outside and inside surface.
• Delivered with close ends to guarantee high internal cleanness.
• Available with pvc coating of blue, black or yellow colour with pvc thickness of 0.50 mm or 1.00mm.
• Can be hand straightened or bent as required using standard benders.

Phosphorus deoxidized copper (DLP)	standard	ASTM B –75	BS 2871	JIS H 3300	DIN 1787
	symbol	C 12000	C106	C 1201	SW-CU
Phosphorus deoxidized copper (DHP)	standard	ASTM B-68	BS 2871	JIS H 3300	DIN 1785
	symbol	C -12200	C 106	C 1220	SF-CU
Tough Pitch Copper (ETP)	standard		BS 2871	JIS H 3300	DIN 1787
	symbol	C 11000	C 101	C 1100	ECU 58

We offer wide range of copper fittings which provide an economic and efficient method of changing directions in a wide spectrum of domestic and commercial applications ranging from air conditioning, refrigeration, heating, fluid distribution, air pressure lines and plumbing etc. Our fittings have smooth surface, heat more rapidly and provide better flexibility to the installer to install & join the copper tube at appropriate place. We manufacture copper fittings in a variety of standard sizes between 6.00mm & 42.00mm. The sizes are measured inside diameter (I.D). The most commonly used copper fittings manufactured by Tube Tech are grouped as under.

• Elbows: Used to change the direction of the pipe & have a close radius to fit in the tightest possible space. The most commonly used elbows are 90 & 45 radius elbow. Many other varieties are available for specific requirements.
• U Bends - Used to accommodate the return flow of the coolant & provides a 180 turn in a much smaller space. We manufacture both expanded as well as plain u-bends for condensers & evaporators.
• Couplings -Used to connect two identical size tubes together. The couplings are used to connect two pipes of different diameter is called a reducing coupling.

Tee:

• Tee is a fitting in the shape of a 'T' where the top of it is the continuous pipe run & the vertical section is a branch connected to it. This shape of fittings offers the most varieties than any other type.
• It may be a reducing Tee when one end of the section is of smaller diameter that means unlike a standard Tee the reducing Tee do not have equally sized parts.
• It may be a cross Tee when it is used to connect four tubes or a threaded Tee when the vertical section of it has female threads.

We offer you a complete line of copper fittings for plumbing available in sizes 15mm, 22mm, 35mm, 42mm.

Tube Tech produces a range of precision copper & brass sleeves to cater the specific requirements of our Customers. Customised as per the given specification by the Customer, these sleeves are appreciated for their excellent quality and performance. These sleeves can also be supplied with tin or nickel plating depending upon the requirement. The main features of these sleeves are:
• Wear resistant
• Available in different sizes as per the requirements.
•  Able to withstand high temperatures

Tube Tech produces a range of precision copper & brass sleeves to cater the specific requirements of our Customers. Customised as per the given specification by the Customer, these sleeves are appreciated for their excellent quality and performance. These sleeves can also be supplied with tin or nickel plating depending upon the requirement. The main features of these sleeves are:

• Wear resistant

• Available in different sizes as per the requirements,

• Able to withstand high temperatures