1. Outer Diameter - 4.00 mm to 54.00 mm.
2. Wall Thickness - 0.30 mm and above.
3. Length: Up to 6 meters.
4. Produced in a variety of tempers (viz. hard, half hard, quarter hard and soft annealed) depending upon the specific requirement.
5. Standards other than those mentioned above are also available on request.

1. Outer Diameter - 4.00 to 22.00 mm
2. Wall Thickness – Between 0.15mm and 1.50 mm
3. Length: Upto 6 mtrs

1. Outer Diameter - 4.00 to 54.00 mm
2. Wall Thickness - 0.15mm and above
3. Length: 6 mtrs
4. Bigger sizes & standards are available
5. Available in a variety of tempers as per the requirements.

1. Outer Diameter - 3.15 mm to 22.00 mm
2. Wall Thickness - 0.45 mm and above.
3. Length: between 5 meters and 30 meters.
4. Available in single / double layer to match the requirement.

• Characterized by a bright, clean and dry outside and inside surface.
• Delivered with close ends to guarantee high internal cleanness.
• Available with pvc coating of blue, black or yellow colour with pvc thickness of 0.50 mm or 1.00mm.
• Can be hand straightened or bent as required using standard benders.

Phosphorus deoxidized copper (DLP)	standard	ASTM B –75	BS 2871	JIS H 3300	DIN 1787
	symbol	C 12000	C106	C 1201	SW-CU
Phosphorus deoxidized copper (DHP)	standard	ASTM B-68	BS 2871	JIS H 3300	DIN 1785
	symbol	C -12200	C 106	C 1220	SF-CU
Tough Pitch Copper (ETP)	standard		BS 2871	JIS H 3300	DIN 1787
	symbol	C 11000	C 101	C 1100	ECU 58

• Elbows: Used to change the direction of the pipe & have a close radius to fit in the tightest possible space. The most commonly used elbows are 90 & 45 radius elbow. Many other varieties are available for specific requirements.
• U Bends - Used to accommodate the return flow of the coolant & provides a 180 turn in a much smaller space. We manufacture both expanded as well as plain u-bends for condensers & evaporators.
• Couplings -Used to connect two identical size tubes together. The couplings are used to connect two pipes of different diameter is called a reducing coupling.

• Tee is a fitting in the shape of a 'T' where the top of it is the continuous pipe run & the vertical section is a branch connected to it. This shape of fittings offers the most varieties than any other type.
• It may be a reducing Tee when one end of the section is of smaller diameter that means unlike a standard Tee the reducing Tee do not have equally sized parts.
• It may be a cross Tee when it is used to connect four tubes or a threaded Tee when the vertical section of it has female threads.

Tube Tech manufactures high quality pvc coated copper tubes & copper coils designed for protection against aggressive environment and colour coded to aid identification. Copper tube with a PVC sheath may be an effective method of protection against attack in harsh operating conditions.

The PVC is tightly extruded onto the tube and is available in black, white, blue, yellow and green colours according to customer requirements. Material used to coat copper tubes is polyvinylchloride (PVC) of the following characteristics:

Density: 1400 - 1500 kg/m³

Elongation: 207 %

Breaking strength: 14 N/mm 2

PVC coated Copper tubes are generally used for water, heating, gas, air, fluid and other installations. Major advantages of PVC-coated copper tubes are: major reduction of heat loss, prevention of burns in users, PVC coating protects copper tubes from aggressive environments and prolongs its service life. Plastic insulation layer is elastic and enables bending and all other working operations during installation.

Tube Tech offers its Customers PVC coated hard and half-hard copper tubes in straight lengths. Soft annealed PVC-coated copper tubes are delivered in coils of 50 Feet lengths. PVC coated Copper tubes & coils are available in 6 mm to 15 mm diameter range. PVC Thickness is as per the specific requirements of the customers and generally available in 0.5 mm & 1.0 mm thickness.

Copper tubes are manufactured in accordance with ASTM B 68 / 75 UNS 12200 and PVC coating is done as per ASTM D 1047. This PVC sheathed tube is then ensured leak proof through pressure drop test.

Tube Tech manufactures copper tubes in square shape to meet the increasing demand of these tubes for general engineering purposes. Our facilities are capable of producing special tube shapes such as: elliptical, D shaped, rectangular, hexagonal etc. Mechanical properties and chemical composition are in accordance with ASTM or other common standards, as well as special customers requirements. These tubes are available in a variety of outer diameter and wall thickness combinations ranging from 6 mm to 40 mm with wall thickness 0.7 mm and above.

Tube Tech manufactures copper tubes in square shape to meet the increasing demand of these tubes for general engineering purposes. Our facilities are capable of producing special tube shapes such as: elliptical, D shaped, rectangular, hexagonal etc. Mechanical properties and chemical composition are in accordance with ASTM or other common standards, as well as special customers requirements. These tubes are available in a variety of outer diameter and wall thickness combinations ranging from 6 mm to 40 mm with wall thickness 0.7 mm and above.

Tube Tech produces a range of precision copper & brass sleeves to cater the specific requirements of our Customers. Customised as per the given specification by the Customer, these sleeves are appreciated for their excellent quality and performance. These sleeves can also be supplied with tin or nickel plating depending upon the requirement. The main features of these sleeves are:

• Wear resistant

• Available in different sizes as per the requirements,

• Able to withstand high temperatures

Tube Tech produces Solid copper earth rods which are made in two types: Externally threaded and internally threaded. Solid Copper earth rods are used where the factor of corrosion is very high and exceptionally long life is required. Hence these rods are manufactured from pure and high conductivity hard drawn copper as per BS 2874-C 101. These earthing rods are accurately designed to ensure their flawless performance rate and durable life. We offer the range of earthing rods at most economical prices and competitive delivery timings to our clients.These rods are also available with tin plating in order to reduce the risk of oxidation and increasing shelf life.